Carson CSHEEBT01A 65cm Built In Recessed Electric Fireplace User Manual

User Manual

[Revision 3.0 October 2022]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY

VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance,

assembly, inclusions, specifications, description, and packaging.

Built-In Electric Fireplace

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Work areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

• Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

Built-In Electric Fireplace

General Electrical Safety

• Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Wherever possible, use a residual current

device (RCD).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Product Safety

WARNING – BEFORE USING THIS HEATER, PLEASE ENSURE THE LEGS ARE ATTACHED SECURELY, PLEASE REFER TO ASSEMBLY

INSTRUCTIONS. DO NOT USE THIS HEATER WITHOUT THE FEET BEING SECURELY ATTACHED – FIRE HAZARD.

When using ANY electrical appliance, basic safety precautions should always be followed including the following:

• Check that the voltage of the main circuit corresponds with the rating of the appliance before operating.

• Ensure the appliance is switched OFF before connecting to the mains power supply.

• Ensure that the appliance is used a stable, level and heat resistant surface.

• Keep the appliance away from any other heat emitting appliances.

• DO NOT immerse cords, plugs or any part of the appliance in water or in any other liquid.

• DO NOT leave the appliance unattended whilst connected to the mains power supply.

• Children or pets should be supervised to ensure that they do not play with the appliance.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory, or mental capabilities, or lack

of experience and knowledge, under adult supervision.

• This appliance is not a toy.

• Switch off at the wall socket and then remove the plug from the socket immediately after use or before cleaning.

• Use of an extension with the appliance is not recommended.

• DO NOT operate any appliance with a damaged cord / plug or after the appliance malfunctions / has been damaged in any manner. Seek advice

from the manufacturer or it’s service agent or a similarly qualified person.

• DO NOT use any parts / accessories other than those supplied with this appliance, as this may cause damage.

• DO NOT pull the plug out by the cord as this may damage the and/or the cable.

• DO NOT use this product for anything other than its intended use.

• DO NOT carry the appliance by the power cord.

• DO NOT let the cord hang over the edge of the table or counter or let it come into contact with any hot surfaces.

• This appliance is for household use only.

• Electrical appliances must always be stored in a secure place, out of the reach of children.

• DO NOT operate with wet hands.

• DO NOT store the appliance in direct sunlight or in humidity conditions.

• Avoid installation behind a door.

• Use only with the supply voltage specified on the rating plate of the heater.

• To avoid overheating, do not cover the heater.

• Do not cover or restrict airflow to the vent in any manner, as the appliance may overheat and become a fire risk.

• Do not cover the grilles, block entry or exhaust of airflow by placing appliance against any surface. Keep all objects at least 150cm from the front,

and 50cm from the sides and rear of the appliance.

• WARNING: FIRE RISK EXISTS IF THE HEATER IS COVERED BY OR POSITIONED CLOSE TO CURTAINS OR OTHER COMBUSTIBLE

MATERIALS

• DO NOT place the appliance close to a radiant heat source.

• DO NOT operate in areas where petrol, paint or other flammable liquids are used or stored.

• This appliance heats up when in use. To avoid burns, do not let bare skin touch hot surfaces. Switch off and use handles where provided when

moving.

Built-In Electric Fireplace

• DO NOT use the appliance to dry clothes.

• DO NOT leave the appliance unattended whilst in use.

• DO NOT insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric shock, fire, or damage to the

appliance.

• DO NOT immerse in liquid or allow liquid to run into the interior of the appliance, as this could create an electrical shock hazard.

• DO NOT use this appliance outdoors, or on wet surfaces, or where it can fall or be pushed into water. Avoid spilling liquid on the appliance.

• Do not reach for an appliance that has fallen into water. Switch off at the supply and unplug immediately.

• DO NOT operate any appliance with a damaged cord, plug or after the appliance malfunctions, has been dropped or damaged in any manner.

Refer the appliance to a qualified electrical person for examination, electrical or mechanical adjustment, service, or repair before further use.

• DO NOT operate the appliance with wet hands.

• This appliance is intended for indoor, household use only and not for commercial or industrial use. Do not use where it may be exposed to the

elements (including, but not restricted to, moisture and humidity). Do not use outdoors, in the laundry room, in alfresco areas or near window/door

openings.

• DO NOT use this heater in the immediate surroundings of a bath, shower, or swimming pool.

• Use this appliance only as described in this manual. Any other use is not recommended by the manufacturer and may cause fire, electric shock,

or injury.

• A common cause of overheating is deposits of dust or fluff in the appliance. Ensure these deposits are removed regularly by unplugging the

appliance and vacuum-cleaning air vents and grilles, where available.

• DO NOT use this appliance in a window, as rain may cause electric shock.

• DO NOT use abrasive cleaning products on this appliance. Clean with a damp (not wet) cloth rinsed in hot, soapy water only. Always remove the

plug from the mains supply before cleaning.

• DO NOT connect the appliance to the mains source until it has been installed in its final location and adjusted to the position it will be used in.

• Always operate on a flat horizontal surface.

• Switch off the appliance, then use handles (where provided) to change its position.

• DO NOT operate with the cord coiled up as this could cause a build-up of heat, which could pose a hazard.

• The use of an extension cord with this appliance is not recommended, due to the high electrical requirement and subsequent possibility of

overheating due to resistance.

• DO NOT remove the power plug from the socket by pulling the cord – grip the plug instead.

• Always unplug the appliance when not in use.

• DO NOT allow the cord to come into contact with heated surfaces during operation.

• DO NOT run the cord under carpeting, throws or runners etc. Arrange the cord away from areas where it is likely to be tripped over.

• DO NOT twist, kink, or wrap the cord around the appliance, as this may cause the insulation to weaken and split. Always ensure that the cord has

been fully removed from any cord storage area before use.

• DO NOT store the appliance in a box or closed space until it has cooled down sufficiently.

• Children and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge should not use this product.

• CAUTION – Some parts of the product can become very hot and cause burns.

• Children shall not play with the appliance.

• Cleaning and user maintenance shall not be made by children without supervision.

• This heater is not equipped with a device to control the room temperature. Do not use this heater in small rooms when they are occupied by

persons not capable of leaving the room on their own, unless constant supervision is provided.

• The appliance must not be located (when in use) immediately below a socket outlet.

• DO NOT use this appliance with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the

appliance is covered or positioned incorrectly.

• If the supply cord is damaged, it must be replaced by a qualified electrical person to avoid a hazard.

• To avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device,

such as a timer, or connected to a circuit that is regularly switched on and off by your energy provider.

• For additional protection, the use of a Residual Current Device (RCD) with a tripping current not exceeding 30mA is recommended.

• If any household fixed wiring becomes necessary, it must be carried out by a licensed electrician.

• DO NOT use the appliance in spaces less than 4m² in area.

• DO NOT the heater on deep-pile carpets, which may restrict ventilation at the bottom of the heater and create a hazard.

• DO NOT use the heater if the machine is not fixed to the wall.

WARNING! KEEP BUTTON BATTERIES OUT OF REACH OF CHILDREN.

• SWALLOWING MAY LEAD TO SERIOUS OR FATAL INJURY IN AS LITTLE AS 2 HOURS DUE TO CHEMICAL BURNS AND POTENTIAL

PERFORATION OF THE OESOPHAGUS.

• NEVER ALLOW CHILDREN TO REPLACE BUTTON BATTERIES OF ANY DEVICE.

• IF YOU SUSPECT YOUR CHILD HAS SWALLOWED OR INSERTED A BUTTON BATTERY, IMMEDIATELY CALL THE 24-HOUR POISONS

INFORMATION CENTRE ON 13 11 26 (AUSTRALIA).

• REGULARLY EXAMINE DEVICES AND MAKE SURE THE BATTERY COMPARTMENT IS CORRECTLY SECURED. E.G., THAT THE

SCREW OR OTHER MECHANICAL FASTENER IS TIGHTENED. DO NOT USE IF COMPARTMENT IS NOT SECURE.

Built-In Electric Fireplace

• DISPOSE OF USED BUTTON BATTERIES IMMEDIATELY AND SAFELY OUT OF THE REACH OF CHILDREN. A BATTERY CAN STILL BE

DANGEROUS EVEN WHEN IT CAN NO LONGER OPERATE THE DEVICE.

• TELL OTHERS ABOUT THE RISKS ASSOCIATED WITH BUTTON BATTERIES AND HOW TO KEEP THEIR CHILDREN SAFE.

Built-In Electric Fireplace

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

Built-In Electric Fireplace

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Built-In Electric Fireplace

Table of Contents

Safety ............................................................................................................................................................. 2

Safety Symbols ........................................................................................................................................................... 6

Parts Identification ....................................................................................................................................... 9

Assembly ..................................................................................................................................................... 10

Operation ..................................................................................................................................................... 11

Overheating Protection ............................................................................................................................................. 11

Care and Maintenance ................................................................................................................................ 12

Specifications ............................................................................................................................................. 12

Built-In Electric Fireplace

Parts Identification

No. Fireplace No. Control Panel No. Remote Control

1 Hot air outlet 4 Remote control sensor 9 ON/OFF button

2 Control panel 5 Functional switch button 10

LED light button: When the

heater is locked, press the

UNLOCK button for 3

seconds to unlock it.

3 Toughened glass 6 Flame brightness control 11 Heat button

7

Heating button

8

Power switch

1

2

3

4

5

6

7

8

9

10

11

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

Built-In Electric Fireplace

Assembly

1. Take the product out of the packaging box and remove the insulation sheet from the back cover of the

remote-control battery.

2. Install the machine into the finished decorative frame for internal fixation, or fix it in the wall, as shown in the

picture below:

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

Built-In Electric Fireplace

Operation

Warning: This product may heat surfaces around it. Heat may be projected in any direction. Keep

away from any surface that could be affected by heat.

1. The Power switch supplies power to all fireplace functions. Press “I” to turn ON the unit and press “O” to

turn OFF the unit

2. Press the ON/OFF button to turn ON the flames.

3. Press the LED light button to adjust the brightness of the flames. Press 5 times respectively to set the

brightness of the flames.

4. Press the Heat button to adjust the heating power.

− Press once to turn ON the heating function to around 1800W.

− Press twice to reduce the heating power to around 900W.

− Press three times to turn OFF the heating function.

NOTE: The unit has been coated with a protective film which will burn off during the first few minutes of use and

may cause a small amount of fuming. This is quite normal – the fumes are non-toxic and will quickly disappear.

We recommend that you open a window to ventilate the room when using the heater for the first time.

Overheating Protection

The heater has a built-in safety device that will switch the heater OFF in case of accidental overheating. If this

happens:

•

Set the main power switch to the OFF (O) position. Unplug the heater and wait 5-10 minutes for the unit to

cool down.

•

After the unit has cooled, plug it in and operate as normal.

NOTE: Make sure that safety gaps are maintained around the unit.

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

Built-In Electric Fireplace

Care and Maintenance

CAUTION: Press the power button to switch the unit to standby and set the main power switch to the off

(O) position to turn off the unit completely. Now unplug and allow the heater to cool down completely

before doing any cleaning or maintenance.

•

Clean the air vents regularly with a vacuum cleaner (with regular use at least twice a year).

•

Do not use abrasive products or solvents to clean the appliance.

•

For cleaning, use a soft, moist rag and mild detergent (only on the exterior of the unit). Do not use an

abrasive cloth or devices which could affect the appearance of the appliance. Do not let water enter any

openings.

Specifications

Model BT01

Power 900W/1800W

Heating Element Nichrome Wire

Certificate Approval SAA

Recommended Room Size 15-20m²

Cable Length 175cm

Power Plug Australian Standard

Note: No Assembly Required

CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON CARSON

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Carson CSHEEBT01A 65cm Built In Recessed Electric Fireplace Heater

Product's Documents

Product manual

Specifications

Carson CSHEEBT01A Questions and Answers