Manual # 143664
Revised: June 26, 2025
www.CookWithKenyon.com
TEXAN GRILL
WITH STANDARD LITE TOUCH CONTROL
OWNERS MANUAL
Contents
IMPORTANT SAFETY INSTRUCTIONS
Product Specications
Electric Supply Requirements ..............................5
Dimensions..........................................................6
ADA Grill Dimensions............................................7
Before Using the Grill
Quick Start Tips.....................................................8
Operation...........................................................10
Touch Control.......................................................11
Calibration..........................................................12
Heat Settings.......................................................12
Hot Surface Indicator...........................................12
Lock Function.......................................................12
Automatic Shut-Off Time......................................13
Temperature Guide..............................................13
Grill Parts .............................................................14
Lid Removal .......................................................15
Handle Lock ........................................................15
Installation
Unpacking the Grill .............................................16
Check Electrical Supply Requirements...............16
Countertop Preparation.......................................17
Drain Connection.................................................18
Final Preparations Prior to Use............................18
Stainless Steel Maintenance Checklist...............20
Warranty.............................................................21
Please read & save
these instructions
Thank you for choosing Kenyon,
the world’s leading manufacturer
of specialty cooking appliances.
By following the instructions in
this owners manual, your grill will
provide you with many years of
reliable service.
To ensure our ability to continue
serving you, please use this page
to record important product
information.
For quick reference
please keep a
record here:
Purchase date
Model number
Serial number
Name plate location
NAME PLATE
LABEL LOCATION
Read this section BEFORE operating the grill.
The following information applies to all
KENYON Grills.
IMPORTANT SAFETY INSTRUCTIONS
THIS GRILL, LIKE ALL APPLIANCES, HAS THE POTENTIAL TO
CREATE SAFETY PROBLEMS THROUGH CARELESS AND
IMPROPER USE. PLEASE OBSERVE ALL OF THE
FOLLOWING SAFETY PRECAUTIONS.
Read ALL instructions prior to using
product.
CAUTION
Do not touch hot surfaces. Use handles or
knobs.
To protect against electrical shock,
do not immerse cord or plugs in water or other
liquid.
Allow to cool before putting on or taking off
parts.
Warning: If the surface is cracked, switch off
the appliance to avoid the possibility of electric
shock, for hob surfaces of glass-ceramic or
similar material which protect live parts.
Do not operate appliance with a damaged
power cord or plug. If the appliance
malfunctions, discontinue use. Contact
KENYON Customer Care immediately at
(860) 664-4906.
The use of accessory attachments not
supplied by the manufacturer of the
appliance may cause injuries.
Do not let cord hang over edge of table or
counter, or touch hot surfaces.
Always place a minimum of two (2) cups of
water in disposable drip tray prior to grilling.
Never leave children alone - children should
not be left unattended around the grill at any
time.
Close supervision is necessary when any
appliances are used near children.
This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given supervision
or instruction concerning use of the appliance
in a safe way and understand the hazards
involved.
Cleaning and user maintenance shall not
be made by children without supervision.
Allow the grill to cool before taking off
cooking grates, disposable drip trays or lids.
Fuel, such as charcoal briquettes, are not to
be used with this appliance.
3
IMPORTANT SAFETY INSTRUCTIONS
Do not place on or near a hot gas or electric
burner, or in a heated oven.
Extreme caution must be used when
moving an appliance containing hot oil or
other hot liquids.
Ensure grill is installed per instructions
and properly grounded by a qualied
electrician.
Do not use water to extinguish a grease
re, use dry chemical re extinguisher.
Do not use appliance for other than
intended use.
Do not replace or attempt to repair any part
of the grill, unless otherwise noted in this
manual. All other service is to be performed
by a factory authorized technician.
Do not store ammable materials near
the grill.
Do not wear loose tting or hanging apparel
when using the grill.
DO NOT DISCARD THESE INSTRUCTIONS, KEEP
THEM WITH THE KENYON GRILL FOR FUTURE REFERENCE.
4
WARNING!
Charcoal or similar combustible fuels must not be used with this appliance.
KENYON
PART NUMBER
MAX CONNECTED
LOAD
POWER SUPPLY
INPUT
PLUG TYPE
B70400WH 3000 Watts 240V AC 13A 50/60Hz 3 wire cord no plug
B70400WHSCHUKO 3000 Watts 240V AC 13A 50/60Hz SCHUKO plug
B70400WHUK 3000 Watts 240V AC 13A 50/60Hz UK plug
B70400WHAU 3000 Watts 240V AC 13A 50/60Hz AU plug
B70401WH 3000 Watts 240V AC 13A 50/60Hz 3 wire cord no plug
B70401WHSCHUKO 3000 Watts 240V AC 13A 50/60Hz SCHUKO plug
B70401WHUK 3000 Watts 240V AC 13A 50/60Hz UK plug
B70401WHAU 3000 Watts 240V AC 13A 50/60Hz AU plug
B70405WH 3000 Watts 240V AC 13A 50/60Hz 3 wire cord no plug
B70405WHSCHUKO 3000 Watts 240V AC 13A 50/60Hz SCHUKO plug
B70405WHUK 3000 Watts 240V AC 13A 50/60Hz UK plug
B70405WHAU 3000 Watts 240V AC 13A 50/60Hz AU plug
B70410WH 3000 Watts 240V AC 13A 50/60Hz 3 wire cord no plug
B70410WHSCHUKO 3000 Watts 240V AC 13A 50/60Hz SCHUKO plug
B70410WHUK 3000 Watts 240V AC 13A 50/60Hz UK plug
B70410WHAU 3000 Watts 240V AC 13A 50/60Hz AU plug
B70420WH 3000 Watts 240V AC 13A 50/60Hz 3 wire cord no plug
B70420WHSCHUKO 3000 Watts 240V AC 13A 50/60Hz SCHUKO plug
B70420WHUK 3000 Watts 240V AC 13A 50/60Hz UK plug
B70420WHAU 3000 Watts 240V AC 13A 50/60Hz AU plug
B70421WH 3000 Watts 240V AC 13A 50/60Hz 3 wire cord no plug
B70460WH 3000 Watts 208V AC 15A 50/60Hz 3 wire cord no plug
B70460WHNH 3000 Watts 208V AC 15A 50/60Hz 3 wire cord no plug
B70461WH 3000 Watts 208V AC 15A 50/60Hz 3 wire cord no plug
B70461WHNH 3000 Watts 208V AC 15A 50/60Hz 3 wire cord no plug
B70462WH 3000 Watts 208V AC 15A 50/60Hz 3 wire cord no plug
B70462WHNH 3000 Watts 208V AC 15A 50/60Hz 3 wire cord no plug
B70421WHADA 3000 Watts 240V AC 13A 50/60Hz NEMA 6-15
B70461WHNHADA 3000 Watts 208V AC 15A 50/60Hz 3 wire cord no plug
5
Product Specications
The supply must be from an individual grounded circuit that is protected by a circuit breaker
and rated per the specications for the model as shown in this table.
ELECTRICAL SUPPLY REQUIREMENTS
IMPORTANT!
If the electrical supply does not meet the product specications, consult
with a licensed electrician before proceeding with installation!
Overall & Cutout Dimensions
WIDTH DEPTH HEIGHT
29 1/2” 21” 5 1/2”
(12 1/2” with lid)
750mm 533mm 139.7mm
(317.5mm with lid)
PRODUCT DIMENSIONS
WIDTH DEPTH RADIUS
28” 18 1/2” 1/4”
711mm 470mm 6mm
CUTOUT DIMENSIONS
6
Product Specications
3.95in
100mm
5.43in
138mm
W/DRAIN FITTING
11.43in
290mm
DRAIN FITTING
17.79in
452mm
4.06in
103mm
22.08in
561mm
1.08in
27mm
14.10in
358mm
12.00
(MAX)
22in
559mm
1in
25mm
1.5in
38mm
31in
787mm
7
ADA Handle Grill Product Specications
WIDTH DEPTH HEIGHT
31” 22” 5 1/2”
(12 1/2” with lid)
787mm 559mm 139.7mm
(317.5mm with lid)
PRODUCT DIMENSIONS
WIDTH DEPTH RADIUS
28” 18 1/2” 1/4”
711mm 470mm 6mm
CUTOUT DIMENSIONS
Overall & Cutout Dimensions
Before Using the Grill
Remove the cooking
grates and drip trays
from the grill. Wash the
grill with warm soapy water
using a non-abrasive cloth.
USE ONLY HIGH TEMP
PLASTIC UTENSILS
WHEN GRILLING. Visit
our web site to purchase a
set of high quality stainless
steel/high temp plastic grill
utensils, www.cookwithkenyon.com.
Make sure the drip trays are inserted all
the way into the bottom of grill and electric
element brackets are resting on the element
support bracket.
Cover the bottom of the drip trays with a
liquid. Water
is ne. PLEASE
DO NOT USE
A FLAMMABLE
LIQUID! Doing so
would ruin your
cookout. Using
apple juice if you
are grilling pork
adds a nice avor
to the meat. A can
of lime soda is
wonderful if you are grilling sh. Just remember
always add liquid to the drip trays prior to
grilling.
To keep your grill smoke free, always clean
the grilling surfaces after each use. Simply
wash with warm soapy water using
a non-abrasive cloth or place in your
dishwasher. Empty the drip trays and
wipe with a damp paper towel.
Place your cooking grates or optional
griddles (part #B96000) onto the element
with drip trays installed. Use the griddles for
foods such as eggs, pancakes or my favorite -
stuffed french toast!
Preheat grill with the lid closed for 5 - 7
minutes on desired heat setting for type of
food:
• Steak - Temp setting 550˚F/ Power setting 16
• Burgers - Temp setting 500˚F/ Power setting 9
• Pork and Fish - Temp setting 400˚F/ Power setting 5
• Vegetables - Temp setting 350˚F/ Power setting 4
Close the lid(s) and cook. Enjoy the best
grilled food you have ever tasted!
Clean up. After the grill has cooled to the
touch, take a few pieces of paper towel and
place on the grilling surface. Pour about one
ounce of water on the towel and then using your
high temperature nylon tongs, swab the paper
toweling back and forth to loosen up the residue
from your grilling. Throw the paper towel away
and wipe the grates off with a dry paper towel.
Once the grates have cooled sufciently,
remove the grates and place in your
dishwasher for a thorough cleaning.
With the grates removed, lift up the electric
elements and remove the drip trays. Empty
the contents of the drip trays in an appropriate
place. Wipe the trays out with a dry paper towel
and reuse the trays.
After you have used your grill many times,
you may want to wash the lids. They can be
placed in your dishwasher and run on the pots
& pans cycle. This will restore your grill to its
original pristine look.
To clean the grill, rst be sure the cooking
surface has cooled enough to handle. Then
remove the grates, lift up the electric elements
until they lock in the up position, remove the
middle grate support cross bar, then the drip
trays. The grate support cross bar is removed
by lifting the rear and pulling the front notch off of
the supporting tab. To install the support reverse
the procedure. Do not cook on the grill without
the support cross bar in place!
1
2
3
4
5
6
7
8
9
10
11
12
8
Before Using the Grill
The touch control area is ceramic glass
which is sealed from the effects of rain,
snow and ice. To clean the glass, use a glass
cleaner and soft towel. If stains appear, use a
ceramic glass cleaner which can be found in
your local grocery store.
13
14
15
9
Wipe the stainless steel surfaces with a damp
cloth to remove any residue from previous
grilling sessions.
Use stainless steel cleaner once a month to
keep your grill looking like new. Cerama Bryte
Stainless Steel Polish Kit (A70045) available at
www.cookwithkenyon.com.
10
Operation
DO NOT USE WATER ON GREASE FIRES
Smother re or ame or use dry chemical or
foam-type extinguisher.
USE ONLY DRY POT HOLDERS
Moist or damp pot holders on hot surfaces
may result in burns from steam. Do not let pot
holder touch the grate or element of the grill.
Do not use a towel or other bulky cloth in place
of a pot holder.
DO NOT COOK ON BROKEN GRILL GRATE
OR GRIDDLE
If the grate should break, grease and oils
may come into direct contact with the electric
element and create a risk of electric shock or
re. Contact an authorized service center or
KENYON Customer Care immediately at
(860) 664-4906.
CLEAN GRILL WITH CAUTION
If a wet sponge or cloth is used to wipe spills
on a hot cooking surface, be careful to avoid
steam burns. Some cleaners produce noxious
fumes if applied to a hot surface. Read the
cleaner label for details prior to using.
DO NOT TOUCH HEATING ELEMENT
OR GRATE
The heating element and grate will be hot for
some time after cooking. These components
should be allowed to cool and then be handled
with care and caution while cleaning, as they
may be hot enough to cause severe burns.
Do not operate appliance with a damaged
power cord or plug. If the appliance
malfunctions, discontinue use and contact the
nearest authorized appliance dealer or the
factory examination, repair or adjustment.
CLEAN GRILL AFTER EACH USE
This appliance is equipped with removable,
disposable drip trays. The drip trays MUST be
removed and cleaned after each and EVERY
use. Do not allow grease to accumulate
between cooking. The drip trays and bafe
tray MUST be used when cooking on the
grill. Excessive grease may spill over into the
interior of the grill, voiding your warranty and
posing a re hazard.
NEVER LEAVE GRILL UNATTENDED AT
HIGH HEAT SETTINGS
High heat setting may cause heavy smoking
and ignite grease.
DO NOT CLEAN UNIT WITH PRESSURIZED
WATER
Never clean the grill with any form of
pressurized water or other types of cleaners.
Doing so will void the warranty and may pose
a serious risk of electric shock. Always clean
the grill with a cloth and a stainless steel or
glass surface cleaner.
STORAGE
Suitable shelter must be provided to prevent
direct exposure to rain. Covers available at
www.cookwithkenyon.com.
TO PREVENT SMOKE
To prevent the contents of the drip trays from
smoking, place 2 cups of water (or enough to
cover the bottom of the pan) in the drip trays
before cooking.
DO NOT USE POTS OR OTHER
BAKEWARE ON THE GRILL
KEEP THESE INSTRUCTIONS WITH THE GRILL
FOR FUTURE REFERENCE
To activate an element, rst the master
power must be turned on by placing and
holding a nger for two seconds over the
circular area next to the
master power graphic. An audible beep
will be heard and a light next to the
master power graphic will illuminate.
Then the desired element must be
turned on, by placing a nger over the
circular area marked ON/OFF for that
element. The same beep will sound
and a light will illuminate. Then the heat
level is chosen, by holding a nger over
the circular areas marked with + or -.
Touching the + rst will incrementally set
the heat level from settings 1 thru 8 with
a beep and corresponding number of
lights illuminated. Touching the - rst will
incrementally set the level from
settings 8 thru 1 with a beep and
corresponding number of lights
illuminated. When the desired heat
level is reached the nger is removed
and the grill remains at that heat level.
If an element is activated, but no heat
level chosen, the element will
automatically turn off in 7 seconds.
To change the heat level place nger
on + or - graphic of desired element to
change heat level incrementally up or
down.
To deactivate an element, touch circular
area marked ON/OFF to turn the
element off. Also the master power ON/
OFF can be touched and the entire grill
will be deactivated.
Fig. 9
Element indicator graphic
Element ON/OFF button
- button decreases heat setting
+ button increases heat setting
Element heat
level indicator
Element ON indicator
Element Hot indicator
Master ON/OFF button
Lock button
Operation
Touch Control
11
HEAT SETTINGS
Your Texan Grill has 8 different heat settings,
1 through 8, selected using the (-) and (+)
sensors. The heat setting is displayed as
shown at the right. The heating element
cycles at different time intervals to vary the
heat level. As the setting is increased, the
heating element will remain on for a longer
period, increasing the cooking temperature of
the grill.
CALIBRATION
Upon application of electrical power to the
grill, the controller will run a self-calibration
process. The controller will then sound an
audible conrmation tone and the display will
briey illuminate. The grill is now ready to be
used. For proper calibration the glass above
the controller must be clear of any debris.
Fig. 10
Fig. 11
HOT SURFACE INDICATOR
Your Texan Grill is equipped with a hot surface indicator for each grill element. An indicator
illuminates when it’s respective element is activated. It will remain illuminated after the element is
de-energized for a period of up to 30 minutes until the grill has cooled. See Fig. 9.
LOCK FUNCTION
The lock function allows the user to lock the control and the heat level can only be decreased or
the element de-energized. When locked an element can not be energized and the heat level can
not be increased. To activate or de-activate the lock function, touch the lock button for 3 seconds.
A light will illuminate to indicate the control is locked.
POWER
LEVEL
DISPLAY
(HEAT
SETTING 8
SELECTED)
Operation
12
TURNING “OFF” THE GRILL
To turn off the grill, simply touch and hold the Master Power Sensor for two seconds. The
controller will de-energize and shut off the heating element.
Automatic Shut-Off Time
The table below displays the automatic shut-off
time corresponding to each heat setting.
SETTING
AUTOMATIC
SHUT-OFF (min)
1 91
2 91
3 91
4 65
5 67
6 67
7 67
8 60
Temperature Guide
The following is meant to be a guideline.
Individual results may vary depending on
conditions. Factors such as wind, and outside
temperatures, food temperature when placed on
grill can affect cooking times. The grill is
designed and engineered for optimal cooking
performance with the lid down or closed.
SETTING FOOD TYPES
1
Fried eggs on griddle
2
Pancakes - French toast on griddle
3
Vegetables
4
Vegetables - Fish
5
Fish - Chicken
6
Chicken - Hamburgers
7
Hamburgers - Steaks
8
Steaks
13
Operation
14
Grill Parts
Heating Elements
The heating elements are designed to pivot as
shown to remove/replace the bafe tray and drip
trays. They will stay in the up position. To put
down apply slight downward pressure.
Bafe Tray
The bafe tray supports the drip trays, heating
elements and grates and must always be used
when operating the grill. The cross bar must
also be installed to support the elements and
grates.
Drip Trays
The drip trays collect all the fat and juices
created during the cooking process. The drip
trays must be emptied after each use. When
replacing the drip trays, position the drip trays
so that they are completely contained inside the
bafe tray and insuring that the side or the rim
of the drip trays do not protrude outside of the
bafe tray.
To prevent the contents of the drip trays
from smoking, place 2 cups of water (or
enough to cover the bottom of the pan) in
the drip trays before cooking.
Grates
Grates must be cleaned after every use. The
grates have a nonstick coating for ease of
cleaning. Wash grates after each use in warm
soapy water.
Operation
Drip trays must be contained
inside of heat baffel as shown
Element support
bar must be in place
as shown
15
Operation
Lid Removal
The grill lids are removable for cleaning.
To remove the lids, open it so the bearing
is aligned with the notch in the lidstay. Pull
the lidstay toward the center of the grill, over
the bearing, releasing the lid from the lidstay
mechanism. Then slide the quick release pin out
of the middle hinge.
Quick release pin
Notch in lidstay
With the quick release pin removed, grasp the
lid, pushing back on the center to clear the
middle hinge and slide the lid away from the
center of the grill until the outer hinge is free of
it’s pivot pin. Once the lid(s) have been removed
they can be washed in warm, soapy water.
Installation is reverse of removal.
The handle lock allows the user to lock both lids
together for ease of opening and accessing the
entire grilling surface.
The lids can also be unlocked and opened
individually for access to either half of the grilling
surface.
This is a great feature allowing the user to
access only half of the grill, allowing the other
half to continue cooking uninterrupted.
Handles Locked
Slide & Twist
Unlock Lock
Handles Unlocked
Slide & Twist
Unlock Lock
Handle Lock (Split Lid Grill Models Only)
Unpacking the Grill
1
Carefully unpack the grill from its
shipping container.
Verify and identify the package contents.
The following items should be included in the
carton. If any components are missing or
damaged, call KENYON immediately.
2
This product must be installed in accordance
with national, state and local electric codes.
Refer to table on page 5 table for the correct
voltage, amperage and frequency that must be
supplied to the grill. The means for disconnection
must be incorporated in the xed wiring in
accordance with the wiring rules.
Check the Electrical Supply
Requirements
PARTS INCLUDED
Texan Grill
3 feet of drain hose
with brass tting
(9) Mounting
screws
IMPORTANT!
If the electrical supply does not meet the product specications, consult
with a licensed electrician before proceeding with installation!
Installation
16
17
Installation
Countertop Preparation
3
Your Texan Grill is supplied with a factory
installed polished stainless steel ange that
accepts nine oval head wood screws for mount-
ing. The trim ange of the grill is designed to
hold the unit rmly in place in the countertop. If
desired, you may seal the edge of the counter-
top beneath the trim ange. We recommend a
NON-ADHESIVE such as Plumbers Putty. This
will help reduce the chance of damage to the
trim ange should the unit need to be removed
from the countertop. Should you need to remove
the unit from the countertop after installation
simply take a piece of shing line and run back
and forth under the trim ange to break the caulk
bond.
D - 30 inches minimum clearance between the
top of the cooking surface and the bottom of an
unprotected wood or metal cabinet or 24 inch
minimum clearance when the bottom of the
wood or metal cabinet is protected by not less
than 1/4-inch-thick ame retardant millboard
covered with not less than No. 28 MSG
sheet steel, 0.015-inch-think stainless steel,
0.024-inch-thick aluminum or 0.020-inch-thick-
copper.
E - 6-inch minimum from backsplash of
countertop to edge of grill(refer to page 5 for
overall grill dimensions). 1-1/2 inches minimum
from front of counter to grill. 3” Maximum from
front of counter to grill for ADA Handle Grill
Models.
It is important to plan ahead for installation of
the grill, keeping the following dimensions in
mind.
A - 13 inches maximum depth of overhead
cabinets
B - 36 inches is minimum height of
countertop above oor. For ADA Handle Grill
Models 34” is MAXIMUM height of countertop
above oor.
C - The minimum at countertop surface that the
grill will rest upon must be equal to or greater
than the overall grill dimensions (refer to page 5
for overall grill dimensions).
FOR INSTALLATIONS IN CANADA:
“Do Not Install Closer Than 1/2 Inch
(12mm) From Any Adjacent Surface”, and
NE PAS INSTALLER A’MDINS DE 12MM
DETOUTE SURFACE ADJACENTE.
WARNING!
Allow a 2 inch (2”) minimum clearance
between the bottom of the grill and
combustible surface located below, ie:
the upper edge of a drawer installed
below the grill (see page 18). Failure
to provide proper clearances and
ventilation may result in a re hazard.
PLEASE READ THIS SECTION PRIOR TO
MAKING CUTOUT FOR THE GRILL.
18
Drain Connection
4
For your convenience, the grill is equipped
with a 1/2” NPT brass pipe tting and 90º brass
elbow which you can attach the 5/8” ID exible
hose that came with your grill. The
portable version of the grill comes with a brass
pipe plug installed in the drain tting. If you are
using your grill as a portable unit, save the hose
and 90º brass tting for possible installation in
the future.
Drain fitting for 5/8” ID hose
Installation
5
Remove the protective plastic lm from the
lid, trim ange and glass panel. Clean the grill
before you use it for the rst time. A thorough
cleaning with a stainless steel or glass cleaner
will remove any traces of plastic lm adhesives
and manufacturing oils.
Wash the nonstick coated grates in warm
soapy water before using the grill.
Final Preparations Prior
to Use
19
Installation
WARNING!
To eliminate the risk of burns by
reaching over heated surface units,
cabinet storage space located above
surface units should be avoided. If
cabinet storage is to be provided, the
risk can be reduced by installing a
range hood that projects horizontally
a minimum of 5” beyond the bottom of
the cabinets.
Before making the countertop cutout, check for
clearance. Check to see if the grill will clear
the front and side walls of the base cabinet. It
is also important to provide enough ventilation.
Adequate ventilation of the space below the
countertop must be provided to ensure proper
operation of the grill. Heat transferred from
the grill bottom pan during operation will over-
heat an improperly ventilated area.
2 INCH (51mm) MINIMUM
Since the appliance requires a sufcient supply
of fresh air to operate at maximum performance,
the cabinet must be designed accordingly. The
following is required for this:
• The cabinet must have a minimum of two
openings; one to allow fresh air to enter and the
other for hot air to escape the cabinet.
• Opening sizes must be equal to 8 square
inches each. This is for ambient temperatures
of 85ºF / 30ºC and below. If the ambient
temperature around the appliance is above 85ºF
/ 30ºC then larger ventilation opening sizes may
be required.
When making countertop cutout, radius the
corner to help prevent cracking of the countertop
material. A 1/4 inch radius is typical, but follow
the countertop manufacturer’s instructions
regarding the minimum radius and any
reinforcements required to prevent damage to
the countertop over time.
Use Plumber’s Putty to seal grill to countertop.
Plumber’s Putty is a soft, pliable sealing
compound that is used to make watertight seals
around faucets, drains, and other plumbing
parts. The putty is hidden under the ange, lip, or
edge of the grill and is not visible when the grill
is installed. If caulk were used instead of putty,
it would be difcult to access these areas to cut
through the caulk to remove the part.
Plumber’s Putty is a very inexpensive material
that is sold in small plastic tubs. It is always
shaped by hand before it is applied to the
plumbing part. Follow the basic instructions on
the container of the Plumber’s Putty. If your
countertop is made of granite, marble, quartz,
sandstone or Corian use a stain-free Plumber’s
Putty to prevent staining of the countertop.
STAINLESS STEEL MAINTENANCE CHECKLIST
Every Use (Quick Wipe Down)
After the grill cools, wipe down exterior stain-
less steel surfaces with a paper towel to
remove any grime.
Use mild dish soap and water or
Sprayway® Stainless-Steel Wipes for
smudges.
Dry completely to prevent water spots or
corrosion.
Monthly (Quick Clean & Coating)
Use Sprayway® Stainless Steel Polish
and
Cleaner to wipe down the stainless surfaces.
This leaves a protective coating. Apply using
a paper towel or microber cloth.
Outdoor Care
Use a high-quality, breathable grill cover.
Kenyon offers custom-tted covers for all
grills made with Sunbrella fabric.
Do not use steel wool or abrasive pads,
as these will scratch the stainless surface.
Do not use chlorine-based cleaners, as
they can cause the stainless steel to rust.
Always wipe in the direction of the stain-
less steel grain.
20
Point your phone’s camera at the QR Code to view our Quick Start Tips video for the Electric Grill.
KENYON
Statement of Warranty
Form - F-11-18, Statement of Warranty, Rev. A.docx Page 1 of 1 11/21/2022
PW MW
Kenyon International, Inc (the “Company”) warrants its products in normal usage to be free of defects in
materials and workmanship subject to the conditions and limitations below.
Any part, which proves to be defective in normal usage during the warranty period will be repaired or replaced by the
Company.
In order for product to be covered under this warranty it must be returned to the Company for evaluation. Please
contact [email protected] for return instructions.
This warranty covers certain products built by the Company and is subject to the following conditions and
limitations:
1. The Company’s liability shall be limited to repair or replacement (choice of remedy at Company’s option) of
electronic components as may be defective in materials or workmanship. This liability is limited to three years from
the date of original installation or 42 months from invoice date, whichever comes first; this warranty covers parts
and labor at pre-approved rates. Stainless steel is warranted with a lifetime guarantee to be rust free when cared
for monthly as outlined in owner’s manual. If corrosion begins, contact the Company with photo evidence of
corrosion for replacement components.
2. Determination of suitability of the product for the use contemplated by the Buyer is the sole
responsibility of the Buyer and the Company shall have no responsibility in connection with such
suitability.
3. The Company shall not be liable for any damage resulting from:
• failures due to use of the product in applications for which they are not intended;
• failures due to corrosion, wear and tear, abuse, neglect, improper installation or maintenance;
• failures due to breakage of glass, accidental or otherwise.
4. The Company shall be responsible for ground shipping charges to the location of the appliance (home)
within the Continental United States and Canada. Any duties, express or special shipping charges are
at the expense of the Buyer.
5. All labor allowed by the Company under this warranty must be pre-authorized and performed by an Authorized
Kenyon International Service Center, unless otherwise specified in writing by the Company.
THERE ARE NO OTHER WARRANTIES OF MERCHANTABILITY, FITNESS FOR PURPOSE OR ANY
OTHER KIND, EXPRESSED OR IMPLIED AND NONE SHALL BE IMPLIED BY LAW. The duration of any such warranties
that are nevertheless implied by law for the benefit of a consumer, shall be limited to a period of three years from original
purchase by the user. Some countries do not allow limitations on how long an implied warranty lasts, so this limitation may
not apply to you.
THE COMPANY SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE
BREACH OF THIS WARRANTY, WHETHER EXPRESSED, IMPLIED OR STATUTORY. Some countries or states do not
allow exclusion or limitation of consequential or incidental damages so this limitation or exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT
MAY VARY FROM COUNTRY TO COUNTRY AND STATE TO STATE.
Kenyon International, Inc.
P.O. Box 925 • 8 Heritage Park Road • Clinton, CT 06413 USA
Phone (860) 664-4906 FAX: (860) 664-4907
Effective 1/1/2019
21
