user guide.
MBF50200_ComboBlender_UG_F240118.indd 1 1/18/24 11:05 AM
2
READ ALL INSTRUCTIONS CAREFULLY AND THOROUGHLY BEFORE
OPERATING.
Save these instructions!
for household use only
general use and safety:
Failure to follow all instructions
regarding the use of your magic
bullet
®
Combo Blender may result
in serious personal injury, death, or
property damage. Be aware of possible
hazards when using or storing your
magic bullet
®
Combo Blender.
warning! EXTREME CAUTION
SHOULD BE EXERCISED
WHEN USING HOT, WARM, OR
CARBONATED INGREDIENTS IN THE
PITCHER. ALWAYS MAKE SURE THE
VENTED PITCHER LID IS SECURED
ONTO THE PITCHER BEFORE
OPERATING THE BLENDER WITH
THE PITCHER ATTACHED.
warning! NEVER BLEND HOT,
WARM, OR CARBONATED
INGREDIENTS IN THE BLENDING
CUP AS IT MAY PRESSURIZE THE
CONTENTS AND ERUPT UPON
OPENING, CAUSING SERIOUS
BODILY INJURIES OR DAMAGE.
important safeguards.
When operating your magic bullet
®
Combo Blender, remember:
ôâçæõúäðîæôģóôõÞéæïöôêïèâïúæíæäõóêäâíâññíêâïäæãâôêäôâçæõúñóæäâöõêðïô
ôéðöíåâíøâúôãæðãôæó÷æåêïäíöåêïèõéæçðííðøêïè
warning! To avoid the risk of serious injury, death, property damage, or
damage to your device carefully read all instructions in this User Guide
before operating your magic bullet
®
Combo Blender.
If you let anyone else use your magic bullet
®
Combo Blender, make sure that they
understand the health and safety information in this User Guide, as well as any
additional safety or usage instructions provided. Each person using a device should
completely read the User Guide to become familiar with the safe operation of the unit.
ONLY USE THE BLENDING PITCHER
AND VENTED PITCHER LID TO BLEND
HOT, WARM, OR CARBONATED
INGREDIENTS.
HOT, WARM, AND CARBONATED
INGREDIENTS SHOULD ONLY BE
BLENDED USING THE BLENDING
PITCHER, WITH THE VENTED
LID ATTACHED.
• Do not use the magic bullet
®
Combo Blender for anything other
than than its intended purpose.
• Do not leave or place non-food
items in any of the attachments while
blending. Doing so may damage
the unit or crack or shatter the
attachment, resulting in bodily
injury or property damage.
• Close supervision is necessary when
any appliance is used by or near
children to ensure they do not play
with the appliance. Keep cord out of
reach of children.
• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory, or mental
MBF50200_ComboBlender_UG_F240118.indd 2 1/18/24 11:05 AM
3
• Do not operate if any of the parts
and accessories are damaged in any
manner which may impair proper
function or create a safety hazard.
Contact Customer Service for
assistance at: 1 (800) 523-5993.
• Do not use parts or accessories from
other manufacturers or dierent
models of magic bullet
®
products.
Use of parts and accessories
NOT provided by magic bullet
®
may damage your unit or cause
serious injury.
• Use only genuine magic bullet
®
attachments/accessories specifically
designed for your magic bullet
®
Combo Blender. Aftermarket parts
are not made to magic bullet
®
specifications and may damage your
unit or cause serious injury.
• Do not attempt to defeat any safety
interlock mechanisms.
• DO NOT USE OUTDOORS.
• ALWAYS UNPLUG THE MAGIC
BULLET
®
COMBO BLENDER
WHEN NOT IN USE.
ãíæïåêïèøêõéîâèêä
ãöííæõ
®
cups:
warning!
NEVER BLEND
HOT, WARM, OR CARBONATED
INGREDIENTS IN THE MAGIC
BULLET
®
CUP! FRICTION FROM
ROTATING BLADES CAN GENERATE
HEAT INSIDE THE CUP THAT MAY
CAUSE THE CUP AND BLADE TO
SEPARATE UPON OPENING OR
REMOVING FROM THE POWER BASE.
THIS MAY RESULT IN THE EXPULSION
OF HOT LIQUIDS FROM THE CUP
OR EXPOSURE TO THE BLADES,
BOTH OF WHICH CAN CAUSE
SERIOUS INJURY OR PROPERTY
DAMAGE. ONLY USE THE BLENDING
PITCHER AND VENTED PITCHER
LID TO BLEND HOT, WARM, OR
CARBONATED INGREDIENTS.
• NEVER USE THE MAGIC BULLET
®
BLENDING CUPS TO BLEND HOT OR
WARM INGREDIENTS.
capabilities, or lack of experience and
knowledge, unless they are closely
supervised and instructed concerning
use of the appliance by a person
responsible for their safety.
• NEVER LEAVE THE MAGIC BULLET
®
COMBO BLENDER UNATTENDED
WHILE IT IS IN USE.
• Do not place or operate your
magic bullet
®
Combo Blender on
uneven or unstable surfaces.
• The risk of fire, shock or damage to
your magic bullet
®
Combo Blender
during cleaning can be reduced by
taking the following precautions:
– Unplug and power o your device
before cleaning.
– Only clean the exterior of
your device.
– Clean your device with a dry cloth.
• Do not attempt to clean the Motor
Base by immersing it in water or other
cleaning liquids. Only gently wipe and
dry the Motor Base with a clean cloth.
• Do not place any magic bullet
®
part or accessory in a microwave,
conventional oven, air fryer, or
stovetop pot, or immerse in boiling
water, as this will damage the part.
• Do not place or operate your magic
bullet
®
Combo Blender on or near
a hot gas or electric burner, or in a
heated oven.
• NEVER wash your magic bullet
®
parts
or accessories using the sanitize or
heat cycle of your dishwasher. Doing
so can warp the part, which can
create hazardous conditions during
use that may result in bodily injury or
property damage.
• NEVER place any magic bullet
®
parts or accessories in the freezer
or use them as storage containers in
the freezer.
• Always ensure your magic bullet
®
Combo Blender is powered o and
unplugged, and that the blades have
completely stopped rotating before
removing or cleaning the unit.
• Remove and safely discard any
packaging material or promotional
labels before using the appliance for
the first time.
MBF50200_ComboBlender_UG_F240118.indd 3 1/18/24 11:05 AM
4
– Starting with hot or warm
ingredients allows more heat
and pressure to build up when
blending. This can cause the
Cup to separate from the Blade,
potentially expelling hot ingredients
and exposing the blade, both of
which can cause injuries.
– Only blend room-temperature or
refrigerated ingredients (70°F/21°C
or cooler) inside the Cup even
if the recipe used calls for a
temperature warmer than
room-temperature. After
blending, you may transfer the
mixture to a stovetop pot to heat.
• DO NOT BLEND INGREDIENTS IN THE
MAGIC BULLET
®
CUP FOR
CONSECUTIVE BLENDING CYCLES.
– Blending causes ingredients to
heat up, which builds pressure
in the Cup over time. Multiple
blending cycles may cause the Cup
to pressurize and separate from
the blade, exposing the blade or
expelling heated ingredients —
both of which can cause injury.
– After 2 consecutive blends cycles,
wait at least 10 to 15 minutes before
blending another cycle.
– Always untwist the Blade from the
Blending Cup slowly, carefully, and
pointed away from your body to
release built-up pressure. NEVER
attempt to open the Cup if it feels
hot or warm to the touch. See
CUP CAUTION section for details.
• DO NOT BLEND ANYTHING
CARBONATED OR EFFERVESCENT
— NO BUBBLES – IN THE MAGIC
BULLET
®
CUP.
– Carbonated and eervescent
ingredients (soda, carbonated
water, baking powder, baking
soda, yeast, some batters,
cake mix, dry ice, or other
ingredients that become bubbly)
release gases that increase
pressure within the Cup. Pressure
from released gases can cause
a sealed magic bullet
®
Cup to
separate, resulting in possible
injury and/or property damage.
note: Some protein powders
include eervescent ingredients.
Always check the listed
ingredients before adding.
• DO NOT OVERFILL THE MAGIC
BULLET
®
CUP.
– Filling above the MAX line can
result in leakage. The cyclonic
action of the magic bullet
®
requires
an adequate amount of space to
extract eectively. Exceeding the
MAX line can result in leakage,
and may create a dangerous
pressurization which can cause
the Cup and Cross Blade assembly
to separate, resulting in possible
injury and/or property damage.
• DO NOT LEAVE BLENDED FOODS
INSIDE A SEALED CUP.
Blended mixtures can spoil and
ferment, increasing pressure when
left in the Cup.
– Use the To-Go Lid or transfer to
a vented container for storage
after blending.
îâèêäãöííæõ
®
cup caution:
warning!
NEVER ATTEMPT
TO OPEN A SEALED MAGIC
BULLET
®
CUP IF IT FEELS HOT
OR WARM TO THE TOUCH; THE
CONTENTS MAY BE HEATED AND
PRESSURIZED, CAUSING THE CUP
TO VIOLENTLY SEPARATE WHEN
OPENED, WHICH CAN RESULT IN
BODILY INJURY AND BURNS. IF THE
CUP FEELS HOT OR WARM, FOLLOW
THESE STEPS:
1. Cease blending immediately and
unplug the unit from the outlet.
2. LEAVE ALONE, DO NOT OPEN.
Leave the Cup where it is and
do not touch it or allow others
to touch it. Do not attempt to
continue blending.
3. Do not attempt to disengage the
Cup from the Motor Base. DO NOT
attempt to separate the Cup from
the Cross Blade by heat or force, or
MBF50200_ComboBlender_UG_F240118.indd 4 1/18/24 11:05 AM
5
warm, or carbonated ingredients or
liquid in the magic bullet
®
Cup!
• ALWAYS securely tighten the
Cross Blade to the Cup to
prevent leakage.
• Always make sure the Cup is securely
locked onto the Motor Base before
blending. The motor will not turn
on unless the Cup is set in the
locked position.
• Do not overfill or exceed the MAX
line. Exceeding the MAX line can
result in leakage.
• Do not remove the Cup while the unit
is in operation.
• NEVER operate your magic bullet
®
Cup when empty.
• Do not attempt to disengage the
Cup from the Motor Base if the
Cup starts to leak during blending.
Leakage can indicate that the Cup
is about to separate from the blade,
which can expose the Blade and
cause laceration injuries. If you notice
leaking, unplug the unit immediately
and allow the motor to come to a
complete stop before removing the
Cup from the Motor Base. Do not
crush ice or overfill the Cup with ice.
Your magic bullet
®
Combo Blender
is not intended to be used as an ice
crusher. Overfilling the Cup with ice
may cause ice to wedge into the
blade, inhibiting blades from turning,
and overheating the motor.
• DO NOT overfill the Cup with
ice. Always use sucient liquid
ingredients when blending.
• Do not place any magic bullet
®
parts
or accessories on the bottom rack
of your dishwasher or use the heat/
sanitize cycle.
• Cups, To-Go Lids, and other magic
bullet
®
parts or accessories are NOT
microwave-safe.
• Do not use the Blade as a storage
lid, as it is not vented. Your blended
mixture can ferment, increasing
pressure within the Cup, which may
cause separation that can lead to
bodily injury and property damage.
by prying apart the components,
which may crack or shatter the Cup
and result in bodily injury.
4. Allow the Cup to cool for at least
30 minutes.
5. After 30 minutes, check if the Cup
is completely cooled. If still warm,
allow to cool more.
6. If cool to the touch, slowly
disengage the Cup from the
Motor Base.
7. With the Cup pointed away
from your face and body, cover
the blade with a towel and slowly
untwist the Cross Blade from
the Cup to gently release any
residual pressure.
warning! NEVER ATTEMPT TO
SEPARATE THE CUP FROM THE
CROSS BLADE BY FORCING OR
PRYING APART THE COMPONENTS.
THIS MAY CRACK OR SHATTER
THE CUP, RESULTING IN BODILY
INJURY. IF YOU ARE UNABLE TO
UNTWIST THE CROSS BLADE FROM
THE CUP, CONTACT CUSTOMER
SERVICE. IF YOU ARE UNABLE TO
UNTWIST THE CUP FROM THE CROSS
BLADE, NEVER LEAVE THE SEALED
CONTENTS OUT FOR A PROLONGED
PERIOD OF TIME. THE CONTENTS
MAY FERMENT, CAUSING THE CUP
TO VIOLENTLY SEPARATE FROM
THE BLADE, WHICH MAY RESULT
IN BODILY INJURY OR PROPERTY
DAMAGE. DISPOSE OF THE CUP AND
CONTENTS PROPERLY SO YOU OR
OTHERS WILL NOT BE INJURED IF
FERMENTATION CAUSES THE CUP
AND BLADE TO SEPARATE.
cup safety:
Proper Cup use is important for the
safe operation of your magic bullet
®
.
Using the Cup inconsistent with these
instructions may result in bodily injury,
property damage, or damage to your
unit. Remember, NEVER blend hot,
MBF50200_ComboBlender_UG_F240118.indd 5 1/18/24 11:05 AM
6
Use the To-Go Lid or transfer to
a vented container for storage
after blending.
• Do not leave any non-food items,
including utensils, inside the Cup
when blending.
• Do not blend stone fruit in this
appliance unless pits/seeds have
been removed. Fruit pits may
damage the Cup, potentially resulting
in shattering and personal injury. In
addition, apple seeds and the pits
of cherries, plums, peaches, and
apricots contain a chemical known
to release cyanide into the body
when ingested.
• Periodically inspect your magic
bullet
®
Cup for damage or wear that
may impair proper function or create
a safety hazard.
• Do not use the Cup if you detect
cracking, cloudiness, or other
damage. You may purchase new
Cups at getmagicbullet.com or by
contacting Customer Service.
• Periodically inspect your magic
bullet
®
Cross Blade. If the blades do
not rotate freely or if the gasket is
missing or damaged, immediately
discontinue use and contact
Customer Service.
• Do not use aftermarket replacement
parts for your magic bullet
®
Combo Blender. Aftermarket
replacement parts may result in
damage to your magic bullet
®
Combo Blender or create safety
hazards resulting in bodily injury or
damage. Only order replacement
parts from getmagicbullet.com or by
contacting Customer Service at:
1 (800) 523-5993, please specify the
model for parts that are compatible
with your unit.
öôêïèõéæãíæïåêïèñêõäéæó
warning!
ONLY USE THE
BLENDING PITCHER WITH THE WITH
THE VENTED PITCHER LID ATTACHED
TO BLEND HOT, WARM, OR
CARBONATED INGREDIENTS. NEVER
BLEND HOT OR WARM INGREDIENTS
INSIDE THE MAGIC BULLET
®
CUP.
USING THE CUP TO BLEND HOT OR
WARM INGREDIENTS MAY CAUSE
THE CUP TO SEPARATE, EXPELLING
HOT CONTENTS OR EXPOSING THE
BLADE, BOTH OF WHICH CAN
CAUSE BODILY INJURY AND
PROPERTY DAMAGE.
• ALWAYS ax the vented Pitcher
Lid to the Blending Pitcher with the
Cap twisted closed when starting a
blending cycle to prevent ingredients
from splashing out of the blender.
This is especially important when
blending hot ingredients as to
prevent risk of burns, bodily injury, or
property damage.
• After blending hot ingredients or
liquids, exercise caution when
opening the Pitcher Lid; hot steam or
the splattering of hot ingredients
may occur.
• Do not overfill the Blending Pitcher
beyond the MAX line.
warning! PRESSURE GENERATED
FROM BLENDING HOT LIQUIDS MAY
PUSH THE LID OFF THE PITCHER. TO
PREVENT POSSIBLE BURN INJURIES,
DO NOT FILL THE PITCHER BEYOND
THE MAX LINE.
warning! TO INCORPORATE
INGREDIENTS DURING BLENDING,
OPEN THE VENTED CAP AND
CAREFULLY POUR OR DROP
INGREDIENTS INTO THE MIXTURE.
WHEN ADDING INGREDIENTS TO
ALREADY HOT INGREDIENTS OR
LIQUIDS, BE MINDFUL OF ESCAPING
HOT STEAM OR THE SPLATTERING
OF HOT INGREDIENTS.
• When using manual speeds, start
blending on the LOW setting. Once
ingredients are integrated, adjust
speed as needed.
MBF50200_ComboBlender_UG_F240118.indd 6 1/18/24 11:05 AM
7
ãíæïåêïèñêõäéæóôâçæõú
Proper use of the Blending Pitcher is
important for the safe operation of your
magic bullet
®
Combo Blender. Using the
Blending Pitcher inconsistent with these
instructions may result in bodily injury,
property damage, or damage to
your unit.
• Always operate the Blender Pitcher
with the Pitcher Lid securely locked
into place.
• Before blending, check that the vent
slots on the Pitcher Lid are clear
and unobstructed. Clogged or
obstructed vent slots can pressurize
contents, potentially expelling the Lid
from the Blending Pitcher. This can
result in personal injury and property
damage from escaping steam or
hot ingredients.
• For recipes that use hot or warm
ingredients, only use the Pitcher.
NEVER use the Cup to blend hot or
warm ingredients. Once the ingredients
are well mixed, twist open the Vented
Lid Cap and carefully pour or drop
additional ingredients into the blended
mixture. If the blended mixture is hot
or warm, use caution and open the
vented lid cap slowly, being mindful of
escaping hot steam or the splattering
of hot ingredients. Always reinstall the
Vented Lid Cap when you are finished
adding ingredients.
• Do not place hands or utensils
inside the Blending Pitcher. This
can result in severe bodily injury or
property damage.
• NEVER USE spatulas, spoons, or other
tools that could make contact with the
spinning blade during use. Doing so can
damage the unit, shatter the Blending
Pitcher, and cause severe bodily injury
or property damage.
èæïæóâíãíâåæôâçæõú
warning!
BLADES ARE SHARP!
HANDLE WITH CARE TO AVOID BODILY
INJURY. NON-FOOD ITEMS OR HARD
INGREDIENTS MAY DAMAGE THE
BLADES OF YOUR MAGIC BULLET
®
COMBO BLENDER. ROUTINELY
INSPECT THE BLADES AND
DISCONTINUE USE IF DAMAGED.
CONTINUED USE WITH DAMAGED
BLADES OR USE INCONSISTENT
WITH THESE INSTRUCTIONS
MAY RESULT IN BODILY INJURY,
PROPERTY DAMAGE, OR DAMAGE
TO YOUR UNIT. DO NOT TOUCH THE
SHARP EDGES OF THE BLADES. TO
AVOID LACERATION INJURY, DO NOT
HANDLE OR TOUCH ANY SHARP
COMPONENTS OF THE BLADE.
NEVER STORE EXPOSED BLADES
ON THE MOTOR BASE. EXPOSED
BLADES CAN PRESENT THE HAZARD
OF LACERATION AND SEVERE
PERSONAL INJURY. ALWAYS COVER
EXPOSED BLADES WITH THE CUP
OR PITCHER.
• Do not remove the Cup or Blending
Pitcher until blades have come to a
complete stop. Removing before the
blades come to a complete stop can
cause damage to the attachments
or unit.
• Always POWER OFF and UNPLUG the
unit and wait until the Blade comes to
a complete stop before assembling,
disassembling, changing accessories,
or cleaning.
• ALWAYS securely tighten the Cross
Blade to the Cup or Blending Pitcher
to prevent leakage.
• DO NOT attempt to disengage the
Cup or Blending Pitcher from the
Motor Base if it starts to leak during
blending. If a leak occurs, power
o or unplug the unit and allow the
motor to come to a complete stop
before removing the Blending Pitcher.
This will prevent risk of separation or
exposure to the spinning blade.
• DO NOT crush ice. Your magic bullet
®
Combo Blender is not intended to be
used as an ice crusher, which may
shatter the Cup or Blending Pitcher
causing injury or damage.
MBF50200_ComboBlender_UG_F240118.indd 7 1/18/24 11:05 AM
8
• DO NOT blend stone fruit in this
appliance unless pits/seeds have
been removed. Fruit pits may
damage the Cup, potentially resulting
in shattering and personal injury. In
addition, apple seeds and the pits
of cherries, plums, peaches, and
apricots contain a chemical known
to release cyanide into the body
when ingested.
• Do not overload the Cup or Blending
Pitcher as this may prevent the
Blade from spinning. If this occurs,
turn o the unit, empty some of the
contents, reattach, and resume.
• Do not attempt to grind dry
ingredients such as grains, cereal,
or coee, as this may damage the
motor and/or the Blade. Use of dry
ingredients may cause the motor
to overheat.
• AVOID CONTACT WITH MOVING
PARTS! Keep hands and utensils
out of and away from the Blade to
reduce the risk of severe personal
injury or damage to the unit.
• NEVER place the Blade or any magic
bullet
®
part or accessory on the
bottom rack of the dishwasher or use
the heat/sanitize cycle while cleaning
components in the dishwasher.
• Periodically inspect your Cross
Blade. If the blades do not rotate
freely or are damaged, immediately
discontinue use and contact
Customer Service. For optimal
performance, we recommend
replacing the Blade every 6 months,
or as needed, depending on use.
• Use of incompatible parts or
aftermarket parts may result in
damage to your magic bullet
®
Combo
Blender or create safety hazards
that may cause personal injury or
damage. When ordering replacement
parts, always use genuine magic
bullet
®
parts and accessories
from getmagicbullet.com or
contact Customer Service at:
1 (800) 523-5993.
electrical safety:
Modification, improper use, and failure
to follow the instructions for proper
setup, use, and care of your magic
bullet
®
Combo Blender can increase the
risk of serious personal injury, death, or
property damage.
• Do not use the unit in countries or
locations with dierent electrical
specifications or plug types.
• Do not use the unit with a voltage
converter device, as it may cause
electrical shorting, fire, or electric
shock, resulting in personal injury or
product damage.
• Do not use the unit in an area
that is wet, or anywhere it could
become wet.
• This appliance has a polarized plug
(one blade is wider than the other).
To reduce the risk of electric shock,
this plug will fit in a polarized outlet
only one way. If the plug does not fit
fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified
electrician. Do not modify the plug in
any way.
• Do not attempt to plug the unit into
an electrical outlet with wet hands.
• Do not use the cord, plug, or Motor
Base if it has been immersed in
water or other liquids. Any significant
spillage on, under, or around the
Motor Base should be cleaned and
dried before plugging in and using
the unit.
• Do not modify the electrical cord in
any way.
• Do not operate any unit with a
damaged electrical cord or plug.
The electrical cord and plug are
not suitable for replacement. If
damaged, the appliance should be
replaced. Contact Customer Service
for assistance at: 1 (800) 523-5993.
• Do not allow or place the electrical
cord near or touching any hot
surfaces, heat source, or flame,
including the stove.
MBF50200_ComboBlender_UG_F240118.indd 8 1/18/24 11:05 AM
9
• Do not allow the electrical cord
to hang over the edge of a table
or counter.
• Do not pull, twist, or damage the
power cord.
• Overloading the unit may overheat
the motor and engage the thermal
breaker. If the internal thermal
breaker shuts o the motor, unplug
the Motor Base and let it cool for
an hour before attempting to use it
again. The thermal breaker will reset
when the unit is unplugged and the
thermal breaker cools down.
• Always UNPLUG your magic bullet
®
Combo Blender when it is not in use,
and when assembling, disassembling,
changing accessories, or cleaning.
• NEVER pull from the power cord to
unplug. To unplug, grasp the plug
and pull from the outlet.
• Use of incompatible parts or
aftermarket parts may result in
damage to your magic bullet
®
Combo
Blender or create safety hazards
that may cause personal injury or
damage. When ordering replacement
parts, always use genuine magic
bullet
®
parts and accessories from
getmagicbullet.com or contact
Customer Service at:
1 (800) 523-5993.
÷æïõêíâõêðï
• NEVER obstruct the ventilation
openings on the bottom of the
Motor Base of your magic bullet
®
Combo Blender. Openings on the
bottom of the Motor Base should
be free of dust and lint and never
obstructed. Obstructions to the
ventilation openings may cause
the motor to overheat, presenting
a fire hazard that may cause
serious personal injury, death, or
property damage.
• ALWAYS operate the magic bullet
®
Combo Blender on a level surface,
leaving unobstructed space beneath
and around the Motor Base to
permit proper air circulation. Slots
!
Save these
instructions!
on the bottom of the Motor Base are
provided for ventilation to ensure
reliable operation and to prevent the
motor from overheating.
• NEVER place your magic bullet
®
Combo Blender on top of flammable
materials such as newspapers,
tablecloths, napkins, dishtowels,
place mats, or other similar materials.
medical safety:
• Always consult your physician
regarding health and nutrition
concerns and advice. The information
contained in this User Guide,
accompanied Recipe Guide,
and/or online recipes are general
suggestions and ideas, and are
not meant to replace the advice of
your physician.
medical interactions:
• If you are taking any medications,
especially cholesterol-lowering
medication, blood thinners, blood
pressure drugs, tranquilizers, or
antidepressants, please check with
your physician before trying any of
the recipes contained in the Recipe
Guide or published online.
• ALWAYS follow recommended
maintenance and care instructions in
the User Guide. NEVER operate your
magic bullet
®
Combo Blender with
damaged components. If your magic
bullet
®
malfunctions or is damaged in
any way, immediately discontinue
use and contact Customer Service at:
1 (800) 523-5993. If you have any
comments, questions, or concerns,
please go to getmagicbullet.com or
call Customer Service.
MBF50200_ComboBlender_UG_F240118.indd 9 1/18/24 11:05 AM
10
MBF50200_ComboBlender_UG_F240118.indd 10 1/18/24 11:05 AM
11
äðïõæïõô
12 what’s included
13 assembly guide
14 user interface
15 using the single-serve
blending cup
18 using the blending pitcher
21 maintaining the magic bullet
®
Combo Blender
24 magic bullet
®
Combo Blender
one-year limited warranty
27 product registration
thank you for purchasing the magic bullet
®
Combo Blender.
MBF50200_ComboBlender_UG_F240118.indd 11 1/18/24 11:05 AM
12
what’s êïäíöåæå
motor base
cross blade
pitcher
single-serve cup
pitcher lid and
removable lid cap
to-go lid
Product configurations may vary. To see our full list of magic bullet
®
accessories,
please visit getmagicbullet.com
PULSE
LOW HIGH
Motor Base
Cross Blade
MAX
LIQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
Pitcher
Single-Serve Cup
To-Go Lid
Pitcher Lid
MBF50200_ComboBlender_UG_F240118.indd 12 1/18/24 11:05 AM
13
âôôæîãíúguide.
cross blade
pitcher
pitcher lid
removable
lid cap
motor base
MAX
LIQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
PULSE
LOW HIGH
Assembly Guide
single-serve cup
Single-Serve Cup
to-go lid
To-Go Lid
MBF50200_ComboBlender_UG_F240118.indd 13 1/18/24 11:05 AM
14
userêïõæóçâäæ
home
The dial is in the center
position. The blender is
not running.
low
Turn the dial to the left to start
a preset 1 minute low-speed
blend cycle. Turn the dial back
to HOME when finished.
pulse
With the dial in the center
position, press and hold the
PULSE button. To stop blending,
release the PULSE button.
high
Turn the dial to the right to start
a preset 1 minute high-speed
blend cycle. Turn the dial back
to HOME when finished.
warning! NEVER blend hot, warm, or carbonated ingredients in
the magic bullet
®
Cup! When using a Cup attachment, after two
consecutive blends cycles, wait 10 to 15 minutes before blending
another cycle. Never attempt to open the Cup if it is warm to the
touch. Allow the Cup and its contents to cool for at least 30
minutes before attempting to open.
PULSE
LOW HIGH
Home - The dial is in the center position. The blender is not running
PULSE
LOW HIGH
Low - Turn the dial to the left to start a preset low-speed blend cycle.
Turn the dial back to HOME when finished
PULSE
LOW HIGH
High - Turn the dial to the right to start a preset high-speed blend cycle.
Turn the dial back to HOME when finished
PULSE
LOW HIGH
Pulse - With the dial in center position, press and hold the PULSE button.
To stop blending, release the PULSE button
MBF50200_ComboBlender_UG_F240118.indd 14 1/18/24 11:05 AM
warning!
15
using the
single-serve
blending cup.
Never blend hot, warm, or
carbonated ingredients in any
sealed magic bullet
®
Cup!
Only use the Blending Pitcher
to blend hot, warm, or
carbonated ingredients.
1 Place the Motor Base on a
clean, dry, level surface.
2 Add ingredients to the
magic bullet
®
Cup. DO NOT
exceed the MAX line!
PULSE
LOW HIGH
Place the Motor Base on a clean, dry, level surface
Add ingredients to the magic bullet Cup. DO NOT exceed the MAX line
MBF50200_ComboBlender_UG_F240118.indd 15 1/18/24 11:05 AM
16
3 Twist on the Cross Blade
until the Cup and Blade are
fi rmly sealed.
5 Run the desired blending
program: twist the Power
Control Knob to LOW or
HIGH, or keep in the HOME
position and press the dial
button to PULSE.
6 Twist the Power Control
Knob to HOME once you’ve
fi nished blending.
4 Flip the Cup upside
down and mount it onto
the Motor Base. Gently
twist it clockwise to lock
it into place. The motor
will not run unless the
Cup / Blade assembly is
properly attached.
Twist on the Cross Blade until the Cup and blade are firmly sealed
PULSE
LOW HIGH
Flip the Cup upside down and mount it onto the Motor Base. Gently twist it clockwise to
lock it into place. The motor will not run unless the Cup/Blade assembly is properly attached
PULSE
LOW HIGH
Run the desired blending program
PULSE
LOW HIGH
Twist the Power Control Knob to HOME once you’ve finished blending
MBF50200_ComboBlender_UG_F240118.indd 16 1/18/24 11:05 AM
17
7 Once the blades have
stopped moving, twist the
Cup counterclockwise to
unlock and remove it from
the Motor Base.
8 Turn the sealed Cup right
side up (Cross Blade on
top), and un-twist the Cross
Blade. Enjoy your blend
from the Cup, or transfer to
another vessel to serve.
PULSE
LOW HIGH
Once the blades have stopped moving, twist the Cup counterclockwise to
unlock and remove it from the Motor Base
Turn the sealed Cup right side up (Cross Blade on top), and un-twist the Cross Blade.
Enjoy your blend from the Cup, or transfer to another vessel to server
MBF50200_ComboBlender_UG_F240118.indd 17 1/18/24 11:05 AM
18
using the
blending pitcher.
warning!
Only operate the Blending
Pitcher with the Pitcher Lid
securely attached!
Never turn the power on while
using the Pitcher without the
Vented Lid Cap inserted and
locked into place!
Always use extreme care and
attention when blending hot
liquids or hot ingredients!
Always use caution when
opening the Pitcher Lid after
blending hot ingredients!
1 Place the Motor Base on a
clean, dry, level surface.
2 Inspect the Pitcher and
ensure the Pitcher and
Blade are secured. To
tighten the Blade, twist it
counter-clockwise onto the
bottom of the Pitcher. To
loosen/release the Blade,
twist it clockwise until it
detaches from the Pitcher.
PULSE
LOW HIGH
Place the Motor Base on a clean, dry, level surface
MAX
LIQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
Inspect the Pitcher and ensure the Pitcher and Blade are secured. You can tighten and
loosen the Blade by twisting it in the direction indicated on the bottom of the Pitcher
MBF50200_ComboBlender_UG_F240118.indd 18 1/18/24 11:05 AM
19
3 Add ingredients to
the Pitcher.
warnin g! DO NOT exceed
the MAX line!
5 Place the Pitcher upright
onto the Motor Base so the
Blade meets the Motor
Base and gently twist
clockwise to lock it into
place. You will feel a
“click” when the blender
is secured.
Plug the power cord into
an outlet.
4 Place the Lid on top of the
Pitcher and press down
fi rmly to snap into place.
Place the Lid Cap over the
Lid opening, then press
down and twist to lock it
in place.
6 Run the desired blending
program: twist the Power
Control Knob to LOW or
HIGH or keep in the HOME
position and press the dial
button to PULSE.
If the blender won’t run,
double check to ensure the
Pitcher is locked in place.
MAX
LIQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
24 3
16 2
8 1
Add ingredients to the Pitcher
Place the Lid on top of the Pitcher and press down firmly to snap into place.
Place the Lid Cap over the Lid opening, then press down and twist to lock it in place
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
PULSE
LOW HIGH
PULSE
LOW HIGH
Place the Pitcher upright onto the Motor Base so the Blade meets the Motor Base and
gently twist clockwise to lock it into place
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
PULSE
LOW HIGH
If using the HIGH or LOW blending cycle, return the Power Control Knob to the HOME
position after the cycle completes. If ingredients require further blending, return the
Power Control Knob to the HOME position first before beginning the next cycle of
blending (HIGH, LOW, or PULSE).
MBF50200_ComboBlender_UG_F240118.indd 19 1/18/24 11:05 AM
20
7 If using the HIGH or LOW
blending cycle, return the
Power Control Knob to the
HOME position after the 1 minute
cycle completes. If ingredients
require further blending, return
the Power Control Knob to the
HOME position fi rst before
beginning the next cycle of
blending (HIGH, LOW, or PULSE).
9 Twist the Pitcher
counterclockwise and lift
o t h e Motor Base.
warnin g! Blades are
sharp. Never insert your
hands into the Pitcher.
8 Twist the Knob to
HOME once you’re
fi nished blending.
Lift the lid tab with your
thumb to loosen and
remove the Lid. Transfer
contents to your desired
serving vessel and enjoy!
10
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
PULSE
LOW HIGH
If using the HIGH or LOW blending cycle, return the Power Control Knob to the HOME
position after the cycle completes. If ingredients require further blending, return the
Power Control Knob to the HOME position first before beginning the next cycle of
blending (HIGH, LOW, or PULSE).
PULSE
LOW HIGH
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
Twist the Pitcher counterclockwise and lift o the Motor Base
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
Lift the lid tab with your thumb to loosen and remove the Lid. Transfer contents to your
desired serving vessel and enjoy
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
PULSE
LOW HIGH
Twist the Knob to HOME once you’re finished blending.
MBF50200_ComboBlender_UG_F240118.indd 20 1/18/24 11:05 AM
21
maintaining the
magic bullet
®
Combo Blender.
warning!
Blades are sharp! Handle
with care.
Never submerge the Motor
Base! Keep it away from water
and other liquids.
Cleaning the magic bullet
®
Combo Blender is easy. All components,
except the Motor Base, are dishwasher safe.
1 POWER OFF and UNPLUG
the Motor Base.
2 Separate the Cup or Pitcher
from the Motor Base.
PULSE
LOW HIGH
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
Twist the Pitcher counterclockwise and lift o the Motor Base
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
PULSE
LOW HIGH
POWER OFF and UNPLUG the Motor Base
PULSE
LOW HIGH
Once the blades have stopped moving, twist the Cup counterclockwise to
unlock and remove it from the Motor Base
MBF50200_ComboBlender_UG_F240118.indd 21 1/18/24 11:05 AM
22
3 If using the Pitcher: lift the
lid tab with your thumb to
loosen and remove the Lid.
6 The Cup, Pitcher, and
accessories can be
hand-washed with soap
and water or cleaned in the
top rack of the dishwasher.
warnin g! NEVER use the
sanitize cycle for risk of
warping the accessories.
4 Remove / transfer any
remaining ingredients
from the Pitcher or
Blending Cup.
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
MAX
LIDQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
Lift the lid tab with your thumb to loosen and remove the Lid. Transfer contents to your
desired serving vessel and enjoy
MAX
LIQUID
MAX
48 6
40 5
MAX
32 4
24 3
16 2
8 1
Remove/transfer any remaining ingredients from the Pitcher or Blending Cup
5 Twist o the Blade from
the Cup or Pitcher.
MAX
LIQUID
MAX
48 6
40 5
32 4
24 3
16 2
8 1
Twist o the Blade from the Cup or Pitcher. Use the indicator on the Pitcher to
determine which direction to loosen or tighten the Blase
MBF50200_ComboBlender_UG_F240118.indd 22 1/18/24 11:05 AM
23
Order new and replacement
parts at getmagicbullet.com
or call customer service at
1 (800) 523-5993.
Use only genuine magic
bullet
®
parts and accessories
specifically designed for
your magic bullet
®
Combo
Blender. Aftermarket parts
are not made to magic
bullet
®
specifications and
may damage your unit or
cause serious bodily injury
or damage.
Store all components of the
unit together in a safe place
where they will not be
damaged and won’t cause
harm. Never leave the
blades exposed during storage.
7 Clean the Motor Base by
wiping the surface with a
damp sponge or cloth.
warning! NEVER submerge
the Motor Base in any liquid
OR remove pieces from the
Motor Base.
8 Use a small, dry brush to
scrub the actuator clean.
warning! NEVER try to
clean the Motor Base while
it is plugged in.
replacement
parts.
storing
your blender.
You can scrub the actuator clean with a small, dry brush
PULSE
LOW HIGH
You can clean the Motor Base by wiping the surface with a damp sponge or cloth
MBF50200_ComboBlender_UG_F240118.indd 23 1/18/24 11:05 AM
24
magic bullet
®
Combo Blender one-year
limited warranty.
limited warranty
for magic bullet
®
Combo Blender:
The magic bullet
®
limited
warranty obligations are
confined to the terms set
forth below:
Capital Brands Distribution, LLC and
magic bullet , LLC, (together
herein “Capital Brands”) warrants this
magic bullet
®
Combo Blender against
defects in materials and workmanship
for a period of one year from the
date of delivery of the product to the
consumer. This limited warranty is valid
only in the country in which the product
is purchased and comes with the
product at no extra charge. However,
shipping and processing fees for
returns, replacements, and/or refunds
will be incurred.
If a defect exists, and Capital Brands is
obligated under this limited warranty,
at its option, Capital Brands will either
(1) repair the product at no charge,
using new or refurbished replacement
parts, (2) exchange the product with
a product that is new or that has been
remanufactured or refurbished from
new or serviceable used parts and
is at least functionally equivalent to
the original product, or (3) refund
the purchase price of the product. A
replacement product assumes the
remaining warranty of the original
product. A repaired product has a
one-year warranty from the date
of repair. When a product or part is
exchanged, any replacement item
becomes your property, and the
replaced item becomes Capital Brands’
property. When a refund is given,
your product becomes Capital
Brands’ property.
OBTAINING WARRANTY SERVICE
For limited warranty service, call our
customer service department at
1 (800) 523-5993 or contact us
via email from our website at
getmagicbullet.com click the Contact
Us link, fill out and submit the customer
contact form, and we will be glad
to help you. When you contact our
Customer Service Department,
you will be asked to provide your
name, address, telephone number,
and proof of the original purchase
(receipt) containing a description of
the product(s), purchase date, deliver
receipt of product, and the appropriate
magic bullet
®
bar code(s). Before
sending your product for limited
warranty service, please make sure to
keep a copy of all relevant documents
for your files (receipt, etc.). It is always
recommended to purchase product
insurance and tracking services when
sending your product for service.
Remember, shipping and processing
fees will be incurred and are not
covered by the one-year
limited warranty.
EXCLUSIONS & LIMITATIONS
This magic bullet
®
Combo Blender One-
Year Limited Warranty applies only to
magic bullet
®
Combo Blender products
MBF50200_ComboBlender_UG_F240118.indd 24 1/18/24 11:05 AM
25
distributed by or for Capital Brands that
can be identified by the magic bullet
®
Combo Blender trademark, trade
name, logo, and bar code. The magic
bullet
®
Combo Blender’s One-Year
Limited Warranty does not apply to any
other products that may appear to be
authentic but were not distributed/sold
by Capital Brands.
Normal wear and tear is not covered
by this limited warranty. This limited
warranty applies to consumer use only
and is void when the product is used in
a commercial or institutional setting.
This limited warranty gives you specific
legal rights, and you may also have
other rights which vary from state to
state. Capital Brands is not liable for
any damage to products not covered
by this warranty (e.g., cups, book,
User Guide).
This limited warranty does not apply:
(a) to damage caused by accident,
abuse, misuse, or misapplication;
(b) to damage caused by improper
maintenance (including unauthorized
parts service); (c) to a product or a part
that has been modified in any way; (d)
if any magic bullet
®
Combo Blender bar
code or trademark has been removed
or defaced; and or (e) if the product has
been used with an adapter/converter.
In addition, proof of purchase and
delivery must be demonstrated. Repair
or replacement of the product (or, if
repair or replacement is not feasible,
a refund of the purchase price) is the
consumer’s exclusive remedy under
this limited warranty. Capital Brands
shall not be liable for any incidental
or consequential damages for breach
of this limited warranty or any implied
warranty on this product. This limited
warranty gives you specific legal rights,
and you may also have other rights,
which vary from state to state.
Capital Brands Distribution, LLC is not
liable for any damage to products not
covered by this warranty (e.g., cups,
book, User Guide).
This limited warranty does not apply:
(a) to damage caused by accident,
abuse, misuse, or misapplication;
(b) to damage caused by improper
maintenance (including unauthorized
parts service); (c) to a product or a part
that has been modified in any way; (d)
if any magic bullet
®
serial number, bar
code, or trademark has been removed
or defaced; and/or (e) if the product has
been used with an adapter/converter
or (f) commercial usage of this
household product.
THIS LIMITED WARRANTY AND
THE REMEDIES SET FORTH ABOVE
ARE EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, REMEDIES
AND CONDITIONS, WHETHER ORAL
OR WRITTEN, EXPRESS OR IMPLIED.
CAPITAL BRANDS DISTRIBUTION, LLC
SPECIFICALLY DISCLAIMS
ANY AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT LIMITATION,
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE.
IF CAPITAL BRANDS DISTRIBUTION,
LLC CANNOT LAWFULLY DISCLAIM
IMPLIED WARRANTIES UNDER
THIS LIMITED WARRANTY, ALL
SUCH WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED IN DURATION
TO THE DURATION OF THIS
LIMITED WARRANTY. No magic bullet
®
Combo Blender reseller, agent, or
employee is authorized to make any
modification to this warranty.
CAPITAL BRANDS DISTRIBUTION,
LLC IS NOT RESPONSIBLE FOR
DIRECT, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES
RESULTING FROM ANY BREACH OF
MBF50200_ComboBlender_UG_F240118.indd 25 1/18/24 11:05 AM
WARRANTY OR CONDITION, OR
UNDER ANY OTHER LEGAL THEORY,
INCLUDING BUT NOT LIMITED TO LOST
PROFITS, DOWNTIME, GOODWILL,
DAMAGE TO OR REPLACEMENT
OF EQUIPMENT AND PROPERTY.
CAPITAL BRANDS DISTRIBUTION, LLC
SPECIFICALLY DOES NOT REPRESENT
THAT IT WILL BE ABLE TO REPAIR
ANY PRODUCT UNDER THIS
LIMITED WARRANTY.
Some states and provinces do not allow
the exclusion or limitation of incidental
or consequential damages or exclusions
or limitations on the duration of implied
warranties or conditions, so the above
limitations or exclusions may not apply
to you. This limited warranty gives
you specific legal rights, and you may
also have other rights that vary by
state or province.
26
MBF50200_ComboBlender_UG_F240118.indd 26 1/18/24 11:05 AM
* You can find the serial number of your
magic bullet
®
Combo Blender under or on the
back of the Motor Base. For further assistance,
call customer service at 1 (800) 523-5993.
Please visit nutribullet.com/register or
call 1 (800) 523-5993 to register your
new magic bullet
®
Combo Blender.
You will be asked to enter the Serial
Number* of your product, along
with the purchase date and place of
purchase. The information you submit
is for product registration. Failure to
complete product registration does
not diminish your warranty rights.
The registration will enable us to contact
you in the unlikely event of a product
safety notification. By registering
your product, you acknowledge that
you have read and understood the
instructions for use, and warnings set
forth in the accompanying instructions.
12345678910110
12345678910110
product óæèêôõóâõêðï
27
MBF50200_ComboBlender_UG_F240118.indd 27 1/18/24 11:05 AM
Capital Brands Distribution, LLC | getmagicbullet.com | All rights reserved.
magic bullet
®
and the magic bullet logo are trademarks of CapBran Holdings, LLC,
registered in the U.S.A. and worldwide.
Illustrations may dier from the actual product. We are constantly striving to improve
our products, therefore the specifications contained herein are subject to change
without notice.
240118_MBF50200
MBF50200_ComboBlender_UG_F240118.indd 28 1/18/24 11:05 AM
