Safety Instructions
The müüv Barbell can be used with the müüv Weights and müüv Barbell Storage Rack
distributed by Stamina Products, Inc. Do not use the müüv Barbell with products not
distributed by Stamina Products, Inc.
The müüv Barbell should only be used after a thorough review of the Owner’s Manual
by all exercisers and saved for future reference.
Keep children and pets away from the müüv Barbell at all times. This product is for adult
use only.
Check the müüv Barbell before use to make sure all the Weight Plates are securely
fastened to the müüv Barbell. Falling weights can result in severe injury.
Alwayschoosetheworkoutwhichbesttsyourphysicalstrengthandexibilitylevel.
Know your limits and train within them.
Always make sure the müüv Barbells are stored in the müüv Barbell Storage Rack
properly. Falling weights can result in severe injury.
Before moving the müüv Barbell Storage Rack, be sure to remove all the Weight Plates,
Dumbbells, and Weight Bar stored in the storage to prevent any weights from falling
during the move. Falling weights can result in severe injury.
The müüv Barbell is for consumer use only. It is not for use in public or semipublic
facilities.
!
WARNING
Cancer and Reproductive Harm www.P65Warnings.ca.gov
!
WARNING
To reduce the risk of serious injury, read the following Safety
Instructions before using the
müüv Barbell
.
Owner's Manual
When calling for parts or
service, please specify the
following model number:
05 - 2140
MADE IN CHINA
2024 Stamina Products, Inc.
2024, 12
This Product is Distributed Exclusively by
4435 West Manufacturers Street, Springeld, MO 65803
Customer Care
1 (800) 375-7520
customer[email protected]
www.staminaproducts.com
Operational Instructions
SETUP THE müüv BARBELL
The müüv Barbell contains the following components. These components can
be used to assemble two dumbbells or a barbell with many weight combinations.
Dumbbell Mode
(5 lbs, each)
Thread the 1.5 lbs Weight Plates(3) onto both
ends of the Handle(2) to obtain a dumbbell.
Attach the additional 2.5 lbs Weight Plates(4)
to the 1.5 lbs Weight Plates(3) to vary the
dumbbell weight. The following are some of
the main dumbbell combinations.
# 1 Weight Bar (10 lbs) x 1
# 2 Handle (2 lbs) x 2
# 3 1.5 lbs Weight Plate x 4
# 4 2.5 lbs Weight Plate x 8
3
2
3
4
4
(10 lbs, each) (15 lbs, each)
NOTE: The 1.5 lbs Weight Plate(3) can be placed on the
outside of the 2.5 lbs Weight Plates(4). The dumbbell will
appear as shown in the illustration.
Operational Instructions
Barbell Mode A
(13 lbs)
Thread the 1.5 lbs Weight Plates(3)
onto both ends of the Weight Bar(1) to
obtain a barbell. Attach the additional
2.5 lbs Weight Plates(4) to the 1.5 lbs
Weight Plates(3) to vary the barbell
weight. The following are some of the
main barbell combinations.
(18 lbs)
(23 lbs)
4
4
3
3
1
1
NOTE: The 1.5 lbs Weight Plate(3) can be placed on the outside of the 2.5 lbs
Weight Plates(4). The barbell will appear as shown in view A.
Barbell Mode B
Thread the dumbbell sets onto both
ends of the Weight Bar(1) to obtain a
barbell.Attachdierentweightsofthe
dumbbells to the Weight Bar(1) to vary
the barbell weight. The following are
some of the main barbell combinations.
(20 lbs)
(30 lbs)
(40 lbs)
A.
B.
NOTE: The 1.5 lbs Weight Plate(3) can be placed on the outside of the 2.5 lbs
Weight Plates(4). The barbell will appear as shown in view B.
Dumbbell
Dumbbell
