AHT1852B
A18FHTR14
Original instructions
2
2
I
mportant!
It is essential that you read the instructions in this manual before
assembling, operating, and maintaining the product.
Subject to technical modifications.
3
3
AHT1852B
x 1
x 1
x 1
4
4
A18FHTR14
x 1
x 1
x 1
x 1
x 1
5
5
FRONT
HANDLE
FRONT
GUARD
BLADES
BLADE
SAFETY TIP
BLADE
SHEATH
TRIGGER
REAR HANDLE
LOCK TRIGGER FOR
ROTATING HANDLE
BATTERY
OPERATOR
PRESENCE SWITCH
6
6
START
STOP
8
12
9
10
14
19
15
17
20
OPERATING THE PRODUCT
REMOVING THE BLADE
CLEANNG THE PRODUCT
REPLACING THE BLADE
REMOVING/INSTALLING THE BLADE SHEATH
7
7
START
STOP
8
12
9
10
14
19
15
17
20
STARTING/STOPPING THE PRODUCT INSTALLING/REMOVING THE BATTERY PACK
ROTATING THE REAR HANDLE
STORING THE PRODUCT
8
8
1
2
2
1
click
START
STOP
INSTALLING/REMOVING THE BATTERY
PACK
STARTING/STOPPING THE PRODUCT
9
9
1
2
2
1
click
START
STOP
NOTE: The product will only start if
both triggers are squeezed.
STARTING/STOPPING THE PRODUCT
10
10
2
1
OPERATING THE PRODUCT
11
11
2
1
STOP
4
3
12
12
90°90°
click
3
1
2
ROTATING THE REAR HANDLE
13
13
90°90°
click
3
1
2
6
5
4
14
14
REMOVING/INSTALLING THE BLADE
SHEATH
1
2
4
3
2
1
15
15
1
2
4
3
2
1
NOTE: Blades should be regularly
sharpened or replaced to ensure the
best cut quality and performance of the
product.
NOTE: Replacement blades can be
ordered through the AEG Customer
Service Line or Bunnings Special Orders
Desk.
REMOVING THE BLADE
16
16
7
6
2
1
5
1
2
4
3
2
1
REPLACING THE BLADE
17
17
7
6
2
1
5
1
2
4
3
2
1
NOTE: Blades should be regularly
sharpened or replaced to ensure the
best cut quality and performance of the
product.
NOTE: Replacement blades can be
ordered through the AEG Customer
Service Line or Bunnings Special Orders
Desk.
REPLACING THE BLADE
NOTE: Do not overtighten the bolt. The
torque setting is 1.6-2.2 Nm.
18
18
1
2
7
6
5
NOTE: Do not overtighten the bolt. The
torque setting is 0.8-1.8 Nm.
1
2
3
4
CLEANING THE PRODUCT
19
19
1
2
7
6
5
1
2
3
4
NOTE: Regularly apply lubricant
to the blades to extend the life and
performance of blades.
CLEANING THE PRODUCT
NOTE: Use only plant-friendly
lubricants.
20
20
1
2
3
4
20
20
STORING THE PRODUCT
NOTE: Always store the product in a
cool, dry, well-ventilated area.
BATTERY AND CHARGER
Model AHT1852B A18FHTR14
Battery pack - A18FB4
Charger - BL1218
Compatible
battery
packs
L1815G, L1815R, L1820R, L1820S, L1820SHD, A18FB2, L1825R,
L1830R, L1830RHD, L1830R-X5, L1840R, L1840S, A18B4,
L1840SHD, A18FB4, L1850R, L1850R-X5, L1850SHD, A18FB5,
L1860R, L1860RHD, L1860B, L1860R-X5, L1890R, L1890RHD
Compatible
chargers
BL1218, BLK1218, BL18DP-X5, AL1218G, AL18G, BL18S
REPLACEMENT PARTS
Blade AAHT18B
INTENDED USE
The cordless hedge trimmer is intended only for outdoor use. For safety
reasons, the product must be adequately controlled by using a two-handed
operation. It should be used in dry, well-illuminated conditions.
The product is intended to cut and trim hedges, shrubs, and similar vegetation.
It is not intended to cut grass, trees, or branches. Do not use the product for
any other purpose.
TECHNICAL DATA CORDLESS HEDGE TRIMMER
AHT1852B/A18FHTR14
Rated voltage 18 V d.c.
No-load speed 2700 min
-1
(SPM)
Blade length 550 mm
Cutting capacity 26 mm
Weight (without battery back) 3.0 kg
Weight with heaviest battery pack 4.2 kg
Noise emission values determined according to EN 60745-1 and EN 60745-2-15
Sound pressure level at operator’s position L
pA
=
79.0 dB(A)
Uncertainty
K =
2.5 dB
A-weighted sound power level L
WA
=
89.4 dB(A)
Uncertainty
K =
2.2 dB
Vibration total values determined according to EN 60745-1 and EN 60745-2-15
Vibration emission value
Front handle a
h
= 2.3 m/s
2
Rear handle a
h
= 4.3 m/s
2
Uncertainty K = 1.5 m/s
2
*SPM (strokes per minute) is the number of strokes the connecting rod completes in one minute.
WARNING!
The declared vibration value has been measured with a standard test method and may be used to compare one tool with another.
The declared vibration value may be used in a preliminary assessment of exposure.
The vibration emission during actual use of power tool can dier from the declared total value depending on the ways in which the tool is used.
Identify safety measures to protect yourself based on an estimation of exposure in the actual conditions of use, taking account of all parts of the operating cycle
such as the times when the tool is switched o and when it is running idle in addition to the trigger time.
21
21
1
2
3
4
BATTERY AND CHARGER
Model AHT1852B A18FHTR14
Battery pack - A18FB4
Charger - BL1218
Compatible
battery
packs
L1815G, L1815R, L1820R, L1820S, L1820SHD, A18FB2, L1825R,
L1830R, L1830RHD, L1830R-X5, L1840R, L1840S, A18B4,
L1840SHD, A18FB4, L1850R, L1850R-X5, L1850SHD, A18FB5,
L1860R, L1860RHD, L1860B, L1860R-X5, L1890R, L1890RHD
Compatible
chargers
BL1218, BLK1218, BL18DP-X5, AL1218G, AL18G, BL18S
REPLACEMENT PARTS
Blade AAHT18B
INTENDED USE
The cordless hedge trimmer is intended only for outdoor use. For safety
reasons, the product must be adequately controlled by using a two-handed
operation. It should be used in dry, well-illuminated conditions.
The product is intended to cut and trim hedges, shrubs, and similar vegetation.
It is not intended to cut grass, trees, or branches. Do not use the product for
any other purpose.
GENERAL PRODUCT SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/or
serious injury. Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded)
product or battery-operated (cordless) product.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded
Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock
TECHNICAL DATA CORDLESS HEDGE TRIMMER
AHT1852B/A18FHTR14
Rated voltage 18 V d.c.
No-load speed 2700 min
-1
(SPM)
Blade length 550 mm
Cutting capacity 26 mm
Weight (without battery back) 3.0 kg
Weight with heaviest battery pack 4.2 kg
Noise emission values determined according to EN 60745-1 and EN 60745-2-15
Sound pressure level at operator’s position L
pA
=
79.0 dB(A)
Uncertainty
K =
2.5 dB
A-weighted sound power level L
WA
=
89.4 dB(A)
Uncertainty
K =
2.2 dB
Vibration total values determined according to EN 60745-1 and EN 60745-2-15
Vibration emission value
Front handle a
h
= 2.3 m/s
2
Rear handle a
h
= 4.3 m/s
2
Uncertainty K = 1.5 m/s
2
*SPM (strokes per minute) is the number of strokes the connecting rod completes in one minute.
WARNING!
The declared vibration value has been measured with a standard test method and may be used to compare one tool with another.
The declared vibration value may be used in a preliminary assessment of exposure.
The vibration emission during actual use of power tool can dier from the declared total value depending on the ways in which the tool is used.
Identify safety measures to protect yourself based on an estimation of exposure in the actual conditions of use, taking account of all parts of the operating cycle
such as the times when the tool is switched o and when it is running idle in addition to the trigger time.
22
22
22
22
If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal injury.
Prevent unintentional starting. Ensure the switch is in the o-position
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewellery, or
long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used. Use of dust
collection can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the rate
for which it was designed.
Do not use the power tool if the switch does not turn it on and o. Any
power tool that cannot be controlled with switch is dangerous and must be
repaired.
Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories,
or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may aect the power
tool’s operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work
to be performed. Use of the power tool for operations dierent from those
intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when used
with another battery pack.
Use power tools only with specifically designated battery packs. Use of
any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects that
can make a connection from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged
or modified batteries may exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature above 130 °C may cause explosion.
Follow all charging instructions and do not charge the battery pack or
tool outside the temperature range specified in the instructions. Charging
improperly or at temperatures outside the specified range may damage the
battery and increase the risk of fire.
SERVICE
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that safety of the power tool
is maintained.
Never service damaged battery packs. Service of battery packs should only
be performed by the manufacturer or authorized service providers.
CORDLESS HEDGE TRIMMER WARNINGS
Keep all parts of the body away from the cutter blade. Do not remove
the cut material or hold the material to be cut when blades are moving.
Make sure the switch is o when clearing jammed materials. A moment of
inattention while operating the hedge trimmer may result in serious personal
injury.
Carry the hedge trimmer by the handle with cutter blade stopped. When
transporting or storing the hedge trimmer always fit the cutting device
cover. Proper handling of the hedge trimmer reduces possible personal injury
from the cutter blades.
Hold the power tool by insulated gripping surfaces only, because the
cutter blade may contact hidden wiring. Cutter blades contacting a “live”
wire may make exposed metal parts of the power tool “live” and could
give the operator an electric shock.
ADDITIONAL SAFETY WARNINGS
Some regions have regulations that restrict the use of the product to some
operations. Check with your local authority for advice. Read all instructions.
Clear the work area before each use. Remove all objects, such as cords, lights,
wires, or strings, which can be thrown or become entangled in the cutting
means.
Check the hedge for foreign objects, such as wire fences.
Exercise additional caution when using the product near posts, buildings, or
other immovable objects.
Beware of thrown objects; keep all bystanders, children, and pets at least 15 m
away from the work area.
Do not allow children or untrained individuals to use the product.
Do not operate in poor lighting. The operator requires a clear view of the work
area to identify potential hazards.
Ensure that all handles and guards are fitted when using the hedge trimmer.
Never attempt to use an incomplete hedge trimmer or one fitted with an
unauthorised modification.
Ensure before each use that all controls and safety devices function correctly.
Do not use the product if the “o” switch does not stop the product.
Inspect the product before each use. Check for loose fasteners. Make sure all
guards and handles are properly and securely attached. Replace any damaged
parts before use. Check for battery pack leaks.
Do not modify the product in any way.
Wear full eye and hearing protection while operating the product. If working in
an area where there is a risk of falling objects, head protection must be worn.
Wear heavy, long trousers, boots, and gloves. Do not wear loose-fitting
clothing, short trousers, jewellery of any kind, or use with bare feet.
Secure long hair so that it is above shoulder level to prevent entanglement
in moving parts.
The use of hearing protection reduces the ability to hear warnings (shouts
or alarms). The operator must pay extra attention to what is going on in the
working area.
Operating similar tools nearby increases both the risk of hearing injury and the
potential for other persons to enter your working area.
Do not use the product when you are tired, ill, or under the influence of alcohol,
drugs, or medication.
Keep firm footing and balance. Do not overreach. Overreaching can result in
loss of balance and can result in serious injury.
Keep all parts of your body away from any moving part.
Before starting the product, make sure the cutting blades will not come in
contact with anything.
While operating the hedge trimmer, always hold it firmly with both hands
by the two handles. Ensure that the operating position is safe and secure.
The manufacturer does not recommend the use of steps or ladders. If higher
trimming is required, use an extended-reach tool.
Blades are sharp. When handling the blade assembly, wear non-slip, heavy-
duty, protective gloves. Do not place your hand or fingers between blades or
in any position where they could get pinched or cut. Never touch the blade or
service the product unless the battery pack is removed.
Turn o and remove the battery pack. Make sure all moving parts have come
to a complete stop:
■ before leaving the product unattended
■ before cleaning or clearing a blockage
■ before adjusting the working position of the cutting means
■ before checking, conducting maintenance, or working on the product
Do not force the product through heavy shrubbery. This can cause the blades
to bind and slow down. If the blades slow down, reduce the pace.
Do not attempt to cut stems or twigs that are larger than 10 mm thick, or those
obviously too large to feed into the cutting blade. Use a non-powered hand
saw or pruning saw to trim large stems.
Do not operate the product with damaged or excessively worn blades.
WARNING! If the product is dropped, shows any sign of malfunction,
suffers heavy impact, or begins to vibrate abnormally, immediately stop
the product and inspect for damage or identify the cause of the vibration.
Any damage should be properly repaired or replaced by an authorised service
centre.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your tool, battery pack
or charger in fluid or allow a fluid to flow inside them. Corrosive or
conductive fluids, such as seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can cause a short circuit.
TRANSPORTATION AND STORAGE
Stop the product, remove the battery, and allow it to cool before storing or
transporting.
Clean all foreign materials from the product. Store the product in a cool, dry,
and well-ventilated place that is inaccessible to children. Keep away from
corrosive agents, such as garden chemicals and de-icing salts. Do not store
outdoors.
Cover the blade with the blade protector before storing the product, or during
transportation.
23
23
When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects that
can make a connection from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged
or modified batteries may exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature above 130 °C may cause explosion.
Follow all charging instructions and do not charge the battery pack or
tool outside the temperature range specified in the instructions. Charging
improperly or at temperatures outside the specified range may damage the
battery and increase the risk of fire.
SERVICE
Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that safety of the power tool
is maintained.
Never service damaged battery packs. Service of battery packs should only
be performed by the manufacturer or authorized service providers.
CORDLESS HEDGE TRIMMER WARNINGS
Keep all parts of the body away from the cutter blade. Do not remove
the cut material or hold the material to be cut when blades are moving.
Make sure the switch is o when clearing jammed materials. A moment of
inattention while operating the hedge trimmer may result in serious personal
injury.
Carry the hedge trimmer by the handle with cutter blade stopped. When
transporting or storing the hedge trimmer always fit the cutting device
cover. Proper handling of the hedge trimmer reduces possible personal injury
from the cutter blades.
Hold the power tool by insulated gripping surfaces only, because the
cutter blade may contact hidden wiring. Cutter blades contacting a “live”
wire may make exposed metal parts of the power tool “live” and could
give the operator an electric shock.
ADDITIONAL SAFETY WARNINGS
Some regions have regulations that restrict the use of the product to some
operations. Check with your local authority for advice. Read all instructions.
Clear the work area before each use. Remove all objects, such as cords, lights,
wires, or strings, which can be thrown or become entangled in the cutting
means.
Check the hedge for foreign objects, such as wire fences.
Exercise additional caution when using the product near posts, buildings, or
other immovable objects.
Beware of thrown objects; keep all bystanders, children, and pets at least 15 m
away from the work area.
Do not allow children or untrained individuals to use the product.
Do not operate in poor lighting. The operator requires a clear view of the work
area to identify potential hazards.
Ensure that all handles and guards are fitted when using the hedge trimmer.
Never attempt to use an incomplete hedge trimmer or one fitted with an
unauthorised modification.
Ensure before each use that all controls and safety devices function correctly.
Do not use the product if the “o” switch does not stop the product.
Inspect the product before each use. Check for loose fasteners. Make sure all
guards and handles are properly and securely attached. Replace any damaged
parts before use. Check for battery pack leaks.
Do not modify the product in any way.
Wear full eye and hearing protection while operating the product. If working in
an area where there is a risk of falling objects, head protection must be worn.
Wear heavy, long trousers, boots, and gloves. Do not wear loose-fitting
clothing, short trousers, jewellery of any kind, or use with bare feet.
Secure long hair so that it is above shoulder level to prevent entanglement
in moving parts.
The use of hearing protection reduces the ability to hear warnings (shouts
or alarms). The operator must pay extra attention to what is going on in the
working area.
Operating similar tools nearby increases both the risk of hearing injury and the
potential for other persons to enter your working area.
Do not use the product when you are tired, ill, or under the influence of alcohol,
drugs, or medication.
Keep firm footing and balance. Do not overreach. Overreaching can result in
loss of balance and can result in serious injury.
Keep all parts of your body away from any moving part.
Before starting the product, make sure the cutting blades will not come in
contact with anything.
While operating the hedge trimmer, always hold it firmly with both hands
by the two handles. Ensure that the operating position is safe and secure.
The manufacturer does not recommend the use of steps or ladders. If higher
trimming is required, use an extended-reach tool.
Blades are sharp. When handling the blade assembly, wear non-slip, heavy-
duty, protective gloves. Do not place your hand or fingers between blades or
in any position where they could get pinched or cut. Never touch the blade or
service the product unless the battery pack is removed.
Turn o and remove the battery pack. Make sure all moving parts have come
to a complete stop:
■ before leaving the product unattended
■ before cleaning or clearing a blockage
■ before adjusting the working position of the cutting means
■ before checking, conducting maintenance, or working on the product
Do not force the product through heavy shrubbery. This can cause the blades
to bind and slow down. If the blades slow down, reduce the pace.
Do not attempt to cut stems or twigs that are larger than 10 mm thick, or those
obviously too large to feed into the cutting blade. Use a non-powered hand
saw or pruning saw to trim large stems.
Do not operate the product with damaged or excessively worn blades.
WARNING! If the product is dropped, shows any sign of malfunction,
suffers heavy impact, or begins to vibrate abnormally, immediately stop
the product and inspect for damage or identify the cause of the vibration.
Any damage should be properly repaired or replaced by an authorised service
centre.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your tool, battery pack
or charger in fluid or allow a fluid to flow inside them. Corrosive or
conductive fluids, such as seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can cause a short circuit.
TRANSPORTATION AND STORAGE
Stop the product, remove the battery, and allow it to cool before storing or
transporting.
Clean all foreign materials from the product. Store the product in a cool, dry,
and well-ventilated place that is inaccessible to children. Keep away from
corrosive agents, such as garden chemicals and de-icing salts. Do not store
outdoors.
Cover the blade with the blade protector before storing the product, or during
transportation.
For transportation in vehicles, secure the product against movement or falling
to prevent injury to persons or damage to the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national provisions and
regulations.
Follow all special requirements on packaging and labelling when transporting
batteries by a third party. Ensure that no batteries can come in contact with
other batteries or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or tape. Do not
transport batteries that are cracked or leaking. Check with the forwarding
company for further advice.
MAINTENANCE
WARNING! Use only original manufacturer’s replacement parts,
accessories, and attachments. Failure to do so can cause possible injury, can
contribute to poor performance, and may void your warranty.
WARNING! Servicing requires extreme care and knowledge and
should be performed only by a qualified service technician. Have the
product serviced by an authorised service centre only. When servicing, use
only original replacement parts.
WARNING! The blades are extremely sharp. To prevent personal injury,
exercise extreme caution when cleaning, lubricating and fitting or removing
the blade protector.
Remove the battery before adjusting, maintaining, or cleaning the product.
You may only make adjustments and repairs described in this manual. For
other repairs, contact an authorised service centre.
After each use, clean the body and handles of the product with a soft, dry
cloth.
After each use, clean the debris from the blades with a sti brush, and
then carefully apply a rust preventative lubricant before refitting the blade
protector. The manufacturer recommends you to use a rust-preventative
lubricant spray to apply an even distribution and reduce the risk of personal
injury from contact with the blades. For information about suitable spray
product, check with an authorised service centre.
Lubricate the blades lightly before use if necessary using the above method.
Check all nuts, bolts, and screws at frequent intervals for proper tightness
to ensure the product is in safe working condition. Any part that is damaged
should be properly repaired or replaced by an authorised service centre.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still impossible to completely
eliminate certain residual risk factors. The following hazards may arise in use,
and the operator should pay special attention to avoid the following:
■ injury caused by the blade
– The blade cannot be guarded while cutting. Keep the blade away
from yourself and others. Cover it with the blade protector when the
product is not in use.
■ injury caused by vibration
– Always use the right tool for the job, use designated handles, and
restrict working time and exposure.
■ hearing injury caused by exposure to noise
– Wear ear protection and limit exposure.
RISK REDUCTION
It has been reported that vibrations from handheld tools may contribute
to a condition called Raynaud’s Syndrome. Symptoms may include tingling,
numbness, and blanching of the fingers, usually apparent upon exposure to
cold. Hereditary factors, exposure to cold and dampness, diet, smoking, and
work practices are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the operator to possibly
reduce the eects of vibration:
24
24
■ Keep your body warm in cold weather. When operating the product, wear
gloves to keep the hands and wrists warm. It is reported that cold weather
is a major factor contributing to Raynaud’s Syndrome.
■ After each period of operation, exercise to increase blood circulation.
■ Take frequent work breaks. Limit the amount of exposure per day.
If you experience any of the symptoms of this condition, immediately
discontinue use and see your physician.
WARNING! Injuries may be caused, or aggravated, by prolonged use
of the product. When using any tool for prolonged periods, ensure you take
regular breaks.
SYMBOLS
Safety alert
Read and understand all instructions before operating the
product. Follow all warnings and safety instructions.
Wear ear protection.
Wear eye protection.
Do not expose the product to rain or damp condition
Always hold the hedge trimmer with both hands when
operating.
Wear non-slip, heavy-duty gloves.
Remove the battery pack before starting any work on the
product.
92
Guaranteed sound power level
Beware of thrown or flying objects. Keep all bystanders,
especially children and pets, at least 15m away from the
operating area.
To avoid serious injury, do not touch the cutting blades.
Regulatory Compliance Mark (RCM). The product meets
applicable regulatory requirements.
Do not dispose of electric tools together with household
waste material. Electric tools and electronic equipment
that have reached the end of their life must be collected
separately and returned to an environmentally compatible
recycling facility. Check with your local authority or retailer
for recycling advice and collection point.
Techtronic Industries Australia Pty Ltd
31 Gilby Road, Mount Waverley,
VIC, 3149, Australia
Techtronic Industries N.Z. Limited
Unit C, 70 Business Parade South,
Highbrook, Auckland 2013, New Zealand
www.aegpowertools.com.au
www.aegpowertools.co.nz
AEG is a registered trade mark used under
license from AB Electrolux (publ).960087640-01
