Technical Support and E-Warranty Certificate www.vevor.com/support
REPLACEMENT CARBON
WATER FILTER
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and does not necessarily mean to cover
all categories of tools offered by us. You are kindly reminded to verify carefully
when you are placing an order with us if you are actually Saving
Half in comparison with the top major brands.
1
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
REPLACEMENT CARBON
WATER FILTER
2
LIFESPAN
Two filters can purify 6000 Gallons of drinking water. The filter should be replaced
every 6 months, depending on the water quality.
BEFORE USE
PRIME THE FILTER.
INSTALLATION
1. Remove the upper chamber of the system.
2. Open the lid and unscrew the old water filter cartridges from the upper
chamber.
3. Remove the water filter from the water. Cover the holes with either your fingers
or the blue caps that came with the filter, and shake the filter vigorously. Then
tap them lightly on the counter to loosen any residual manufacturing dust.
4. Return the upper chamber to the system by placing it onto the lower chamber.
1.Press rubber
priming button
(tan or black
colored) onto
the stem of the
purification
element with the
small end facing
the element.
2.Place the stem
of the (tan or
black colored)
onto the element
between fingers
and press large
end of priming
button against
faucet.
3.While holding priming
button against faucet, turn
on the cold water gently,
allowing water to fill the
cavity of the replacement
filter.
4.Allow the exterior wall of the replacement filter
element to sweat beads of water for about 5
seconds.
5.Rinse process dust from exterior of purification
element. The element has now been successfully
primed. Repeat steps 1-5 for each additional.
3
5. Fill the upper chamber with water and let it drain into the lower chamber When
the lower chamber is full, discard the first batch of water as it may
contain residual manufacturing dust, The system is now ready for use.
Warranty: 3 months
Notice: Please do not open the plastic packaging before use. Carbon molecules
Will absorb moisture in the air and affect the use experience!
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
REP
EC
E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main.
REP
UK
YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House,
London Road, Staines-upon-Thames, Surrey, TW18 4AX
