4 PIECE
TRACK ROD
REMOVAL TOOL
42397 – TRRT-4PC INSTRUCTIONS FOR USE
EN
Original Instructions
Version 2 – May 2024
1. Specication
Stock No. 42397
Part No. TRRT-4PC
Track Rod Arm Length : 350mm
Interchangeable
Head Diameter: 30 – 35mm
35 – 40mm
40 – 45mm
Drive Ends
Hex: 27mm (outer)
Square Drive: ½” (inner)
2. Health and Safety Instructions
• Always refer to the vehicle manufacturer’s handbook
or Haynes manual before dismantling, as some
vehicles must be put into service mode. Failure to
follow the vehicle manufacturer’s service procedure
can result in steering loss.
• Draper tools accepts no responsibility for incorrect
installation of steering components.
3. Instruction for Use
1. Access the track rod and then allow the track rod to
pass through the hollow body (A) until the head of the
tool (B) meets the steering joint (C).
2. Use either a 27mm spanner or ½” square drive to turn
the tool anti-clockwise to loosen the steering joint.
3. Reverse the process with the new joint.
© Published by Draper Tools Limited
Contact Details
Draper Tools, Draper Tools Limited, Hursley Road,
Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK
Website: drapertools.com
Email: [email protected]
Product Helpline: +44 (0) 23 8049 4344
Telephone Sales Desk: +44 (0) 23 8049 4333
General Enquiries: +44 (0) 23 8026 6355
Please contact the Draper Tools Product Helpline for
repair and servicing enquiries.
Delta International, Delta International BV,
Oude Graaf 8, 6002 NL, Weert, Netherlands
(B)
(C)
(A)
