ION Audio Block Rocker
®
Icon User Guide 2
INTRODUCTION ........................................................................ 4
Box Contents .............................................................................................................. 4
Support ......................................................................................................................... 4
SETUP .........................................................................................5
Charging and Battery Information ..................................................................... 5
Outdoor Use and Care ............................................................................................ 6
FEATURES ................................................................................. 9
Front Panel .................................................................................................................. 9
Rear Panel .................................................................................................................... 11
OPERATION .............................................................................. 13
Pairing a Bluetooth® Device ................................................................................. 13
Linking Two Speakers ............................................................................................ 14
Light Modes ................................................................................................................ 15
Using the Radio ......................................................................................................... 15
USB Mode .................................................................................................................... 18
Using the USB Charge Port .................................................................................. 19
App Control .............................................................................................................. 20
TROUBLESHOOTING ............................................................... 21
TABLE OF CONTENTS
ION Audio Block Rocker
®
Icon User Guide 3
APPENDIX ................................................................................ 23
Technical Specifications ....................................................................................... 23
Trademarks & Licenses ......................................................................................... 24
ION Audio Block Rocker
®
Icon User Guide 4
Thank you for purchasing the Block Rocker® Icon Speaker. At ION, your entertainment is as
important to us as it is to you. That’s why we design our products with one thing in mind—to
make your life more fun and more convenient.
Note: Before you first use the product, please fully charge the batteries. Your unit was
purposely shipped with a reduced battery charge to ensure safe transit. For optimal charging,
power o the speaker while charging.
Use the included power cable to connect the unit to a power outlet and let it charge for up to
3 hours. This helps ensure the longest life for your battery.
Box Contents
Block Rocker® Icon
IEC (C13) Power Cable (4.9 ft / 150 cm)
Quickstart Guide
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit i
onaudio.com.
For additional product support, visit i
onaudio.com/support.
INTRODUCTION
ION Audio Block Rocker
®
Icon User Guide 5
Charging and Battery Information
For the quickest charging time, power o Block Rocker® Icon and use the included IEC power
cable connected to a power outlet. A full charge can take up to 3 hours.
The l
ightning bolt icon on the display will light up when Block Rocker® Icon is
connected to a power source and charging. The b
attery icon will fill to display the
battery life percentage. When charging is complete, the lightning bolt icon will
disappear, and the battery icon will be completely filled.
SETUP
ION Audio Block Rocker
®
Icon User Guide 6
Here are some recommendations for getting the longest life from the internal battery.
G
eneral
U
sage
Fully charge the battery before using it.
Avoid full discharge of the battery if possible. Li-Ion batteries are maintenance-
free, and the battery will last longest when operating between 30 and 80 percent
charged.
Do not use the product while charging the battery.
Do not charge the battery in exceedingly hot (greater than 90°F/32°C) or
exceedingly cold (less than 32°F/0°C) temperatures.
S
torage For best product longevity, do not store at exceedingly hot (greater than
90°F/32°C) or exceedingly cold (less than 32°F/0°C) temperatures.
For best product longevity, store product with a 50% battery charge.
If you leave the battery level low and do not charge it for 6 months, it may
permanently lose capacity.
R
epair If the battery fails to charge, contact ION Audio at ionaudio.com.
D
isposal Bring the unit to a recycling center or dispose of in accordance with local
ordinances.
O
utdoor Use and Care
Though Block Rocker® Icon is IPX5 water-resistant and able to tolerate splashing water, please
review the tips below to get the best performance from your Block Rocker® Icon:
• Bring Block Rocker® Icon indoors during extreme weather.
• Please do not place Block Rocker® Icon in standing water.
• Please do not connect the power adapter to a Block Rocker® Icon in a wet environment.
Make sure the power input, power adapter, and power outlet are all completely dry before
making any connections.
• W
ARNING: Keep any non-water-resistant devices (phones, music players, etc.) in a dry
place where they will not be aected by water and cause a risk of electric shock.
ION Audio Block Rocker
®
Icon User Guide 7
Quick Start
1. Make sure all items listed in the Box Contents are included in the box. Look on top of the
cardboard insert for the power cable.
2. Make sure all input devices (such as microphones, CD players, or digital media players) are
turned off with their volume settings set to “zero.”
3. Switch everything on in the following order:
a. Audio input devices (e.g. microphones, instruments, CD players)
b. Block Rocker® Icon
4. Adjust the level of your connected devices. Turn audio source (instruments, Bluetooth
devices) volume all the way up. If a microphone is connected to the Mic In, press the Mic
+/- Buttons on Block Rocker® Icon to adjust the microphone volume to an appropriate
level. Finally, adjust the Volume +/- buttons on Block Rocker® Icon to an appropriate level.
For a detailed step-by-step process for setting your levels, please refer to the Balancing
Your Levels section on the following page.
5. When you are finished using Block Rocker® Icon, switch everything off in the following
order:
a. Block Rocker® Icon
b. Audio input devices
ION Audio Block Rocker
®
Icon User Guide 8
Balancing Your Levels
This process shows how you can quickly balance your microphone signal(s) and
the signal from your Source Device (Bluetooth, Aux, USB).
1. Press the P
ower button to turn on Block Rocker® Icon. Connect your
preferred Bluetooth, Aux device, or USB drive.
2. Using the V
olume +/- buttons on the speaker, set the volume to around 5 or
lower while balancing your levels. This will allow you to set your levels to a
clear and audible level without being overpowering. You can adjust it again
later once a balance has been achieved.
3. Set the M
ic In volume using the Mic +/- buttons on the speaker. Set the level
to 10 as a starting point if you're unsure.
4. Now, set the volume on your Aux source device (Smartphone, tablet, etc.) to
100%. This will guarantee a strong signal.
5. Start playback on your device and adjust the V
olume +/- buttons on the
speaker until it reaches a clear and audible level. If you are using a
microphone, set the M
ic +/- volume level to where you can still hear the
microphone above the music.
For specific troubleshooting steps, please see the T
roubleshooting section.
ION Audio Block Rocker
®
Icon User Guide 9
Front Panel
Click a control below to jump to that section.
1. Display
This screen shows information relevant to the current operation on Block Rocker® Icon.
Note: The Display comes with a plastic protector on it. Remove this for optimal viewing.
• FM / USB / AUX / LINK icons: These icons will remain solid on when Block Rocker®
Icon is in those modes.
• Bluetooth icon: This icon will flash slowly when Block Rocker® Icon is in pairing mode
and will remain lit when a Bluetooth device is connected.
• Charge icon: This icon will remain lit when the power cable is connected, and the
battery is actively charging. When the battery is fully charged, the charge symbol will
turn off.
• Battery icon: This icon will remain on while being used and when actively charging,
even if Block Rocker® Icon is powered off. If Block Rocker® Icon is off and the battery
is fully charged, the battery symbol will turn off.
7
5
2
8
36
141011
9
2
FEATURES
ION Audio Block Rocker
®
Icon User Guide 10
2
. Previous / Next Buttons
In FM mode, press these buttons briefly to go to the previous or next station. Press and
hold these buttons to seek the previous or next strong station.
In Bluetooth and USB modes, press the P
revious or Next button to go to the beginning of
the current track or skip to the following track, respectively. Press the P
revious button
again within one second to skip to the previous track.
Press and hold both P
revious / Next buttons for 5 seconds to reset the speaker to factory
defaults.
3
. Play/Pause Button
Press this button to start and stop Bluetooth or USB audio.
In FM mode, press this button to save and recall radio presets. See O
peration > Using the
R
adio for more details.
4
. Bluetooth® Button
Press this button to enter Bluetooth pairing mode. If there is no connection made after 120
seconds, Bluetooth pairing will stop searching. When connected to a Bluetooth device,
press and hold this button to disconnect a paired device and re-enter pairing mode. Once
disconnected, press this button to re-pair to the last connected device. See O
peration >
P
airing a Bluetooth® Device to learn how to connect a Bluetooth device.
5
. Stereo-Link™ / Repeat Button
Double press this button to start stereo-linking to another Block Rocker® Icon. See
O
peration > Linking Two Speakers for more details.
In USB mode, press this button to change the playback mode. See O
peration > USB Mode
for more details.
6
. Source Button
Press this button to cycle between FM, USB (when inserted), Bluetooth, and Aux modes.
The current mode will be shown on the D
isplay.
In radio mode, single press the B
luetooth button to turn o the radio and switch to
Bluetooth playback.
7
. Lights Button
Press this button to cycle through the light modes. See O
peration > Light Modes for more
information. For the best lighting eect, you may need to adjust the volume of your device
and/or the Source volume.
ION Audio Block Rocker
®
Icon User Guide 11
8
. EQ Button
Press this button to cycle through the Low, Mid, and Hi EQ frequencies. Then press the
V
OL +/- buttons to adjust the EQ frequency settings from -12 to +12.
9
. Mic +/- Buttons
Press these buttons to adjust the microphone
volume.
1
0. Volume +/- Buttons
Use these buttons to raise and lower the volume of the Bluetooth, USB, radio, or aux input
from 0-16. Press and hold a button to raise or lower the volume quickly.
1
1. Power Button
Press and hold this button to turn Block Rocker® Icon on and o. Double press this button
to enable or disable voice prompts.
Note: After 15 minutes of being in an idle state, the speaker will go into low power mode.
Press any button to wake it up. The speaker will maintain a Bluetooth connection if the
device is still within range. After 40 minutes with no audio playing, the speaker will power
down completely. In this state, the power button will need to be used to turn the speaker
back on.
TIP: For proper audio level mixing
tips for Mic and other Source
volumes, see the section Balancing
Your Levels.
ION Audio Block Rocker
®
Icon User Guide 12
R
ear Panel
Note: Pull the tab on the protective rubber panel to release it and access the rear panel port.
1
. USB Charge/Playback Port
You can use this port for charging a USB device, such as a tablet or smartphone. To charge
a device that is streaming music via Bluetooth, pause the music first and then wait for it to
reconnect after the USB cable is inserted.
Connect your USB flash drive here to play music. Use the V
olume +/- buttons to adjust the
volume. Press the S
tereo-Link™ / Repeat button to cycle through the five repeat/shue
options. See the section U
SB Mode for more details.
Note: Your USB drive cannot be more than 128 GB and it must contain playable MP3 files
in order for its data to appear properly in the Display. When you connect a USB drive with
MP3 files, Block Rocker® Icon will order the files alphabetically by folder on the root
directory and then by track name in the folder.
2
. Aux In
Connect a CD player, MP3 player, or other audio source to this 1/8” (3.5 mm) input. Press
the S
ource button to exit AUX mode or unplug the cable connected to the Aux input.
3
. Mic In
Connect a microphone (not included) into this into using a 1/4” (6.35 mm) cable. Turn the
mic on if it has a power switch. Press the M
IC +/- buttons to control the mic volume.
4
. Power Input
Connect the included power cable here to charge the speaker.
4
1
2
3
ION Audio Block Rocker
®
Icon User Guide 13
Pairing a Bluetooth® Device
1. Turn on your Bluetooth device.
2. Turn on Block Rocker® Icon by holding down the P
ower button for 2 seconds. When the unit
is first turned on, it will automatically enter Bluetooth pairing mode. If necessary, press the
B
luetooth button to select Bluetooth mode. The Bluetooth icon on the display will flash to
indicate the speaker is ready to pair and you will hear “Bluetooth Pairing” if voice prompts are
enabled.
3. Navigate to your device’s Bluetooth setup screen, find B
LOCK ROCKER ICON, and connect.
The B
luetooth icon will appear in the display, and if voice prompts are enabled, you will
hear “Bluetooth Connected”. If after 90 seconds if there is no connection, the speaker will
stop searching for a Bluetooth device and enter AUX mode.
Note: If you have previously connected to a Bluetooth device, Block Rocker® Icon will
reconnect automatically.
Note: If your Bluetooth device prompts for a pairing code, enter “0000”.
T
o disconnect a paired device, do any of the following:
• Turn o Bluetooth from your device’s Bluetooth settings. The speaker will enter
Bluetooth pairing mode to make it available for another device.
• Press and hold the Bluetooth button to disconnect and re-enter pairing mode. The
device will now be erased from memory and won't automatically reconnect.
Once you have disconnected, you will hear “Bluetooth Disconnected” if voice prompts are
enabled.
Tip: Double press the Power button to turn voice prompts on or o.
OPERATION
BLOCK ROCKER ICON
1 - PRESS
2
3
ION Audio Block Rocker
®
Icon User Guide 14
L
inking Two Speakers
If you would like to play music from a Bluetooth device, you can first “link” two Block Rocker®
Icon speakers together in order to listen to your music in stereo. One Block Rocker® Icon will
serve as the left speaker and the other will serve as the right speaker.
T
o link two Block Rocker® Icon speakers together:
Note: When you begin the Stereo-Link™ process, any connected Bluetooth devices will be
automatically disconnected. You can also disconnect your device prior to beginning by
pressing the Bluetooth button.
1. Double press the S
tereo-Link™
/ Repeat button on both speakers to enter Stereo-Link™
mode. This first unit pressed will be the primary speaker (Left channel).
Note: The linking process can take up to 30 seconds to complete. Speakers should be within
50’ (15 m) of each other to properly link. The closer the two speakers are, the quicker the
link is established.
2. Once the speakers are linked, the primary speaker will automatically enter Bluetooth pairing
mode. Navigate to your device's Bluetooth settings screen, find B
LOCK ROCKER ICON,
and connect. When the connection is successful, you will hear "Bluetooth Connected" from
the primary speaker (if voice prompts are enabled). When audio playback begins, you
should hear it through both speakers. The primary speaker will play the left channel while
the secondary speaker plays the right channel. Playback controls are active on both
speakers.
T
o disconnect two speakers or cancel linking between the two, double press the Stereo-
Link™
/ Repeat button on one Block Rocker® Icon. You will hear "Bluetooth Disconnected"
from the primary speaker to indicate the link has been broken (if voice prompts are enabled.)
Note: Press and hold the Power button on each speaker while in Stereo-Link™ mode to power
o the connected speakers. Block Rocker® Icon speakers powered o in Stereo-Link™ mode
will automatically enter Stereo-Link™ mode the next time they are powered on and begin
searching for secondary speakers to connect to.
BLOCK ROCKER ICON
PRESS
1 - DOUBLE PRESS
(on the Primary speaker)
2 - DOUBLE PRESS
(on the Secondary speaker)
3
PRESS
ION Audio Block Rocker
®
Icon User Guide 15
L
ight Modes
When the speaker is first powered on, the side LEDs will send red lights from the bottom to
the top, lighting up all LEDs. The eect will hold for 2 seconds and then fade out. Then all
LED’s will fade in and out until a Bluetooth device is connected to the speaker. When paired,
all lights will flash blue 2 times.
Press the M
IC +/- or VOL +/- buttons to have the lights increase from top to bottom to show
how loud the music or mic volume is. The Mic Volume color will be yellow and the Music
Volume color will be red.
Press the L
ight button repeatedly to toggle between one of the light modes below. Press and
hold L
ight Button for 3 seconds to switch to Utility Mode (white light only). Single press the
L
ight button again to return to the previously selected light mode.
Note: For the best lighting eect, you may need to increase the volume of your connected
device or input source.
The LED light modes are:
• F
alling Rainbow – Beat Sync: A section of the color spectrum will flow downward through
the side lights. The speed is based on the intensity of the bass frequencies. Low/No Bass
= slow speed, Some Bass = average speed, High Bass = fast speed.
• S
tarlight Effect – Beat Sync: Randomly selected LEDs in all zones flash a random color
based on the bass frequency volume and slowly fade away. Low Bass = Less Stars, High
Bass = More Stars.
• F
ire Pit: The side lights simulate the up and down movement of a fire.
• E
Q Volume – Beat Sync: The LEDs react to bass frequencies going up and down with the
music and the color fading throughout the color spectrum. Low/No bass = slow speed,
Some Bass = average speed, High Bass = fast speed.
• B
ouncing Stars: The side LEDs will bounce up and down and fade up through the color
spectrum.
• S
tacking Mode: Light drops fall down stacking up on each other until the color reaches
the top of the speaker. Once the light fills up the LEDs completely, the next color in the
spectrum will begin and repeat the process.
• H
orizontal Waves: Three waves of one color flow down. After three waves have gone from
the top to the bottom, a new set of waves in the next color will appear. Waves speed up
or slow down based on bass frequency volume. High Bass = fast speed, Medium Bass =
average speed, Low Bass/No Bass = slow speed.
• C
olor Cycle: The side lights will show the same color while cycling through the color
spectrum.
PRESS
ION Audio Block Rocker
®
Icon User Guide 16
• Static Color: The speaker will display one color that is selected from the ION app. If a color
is not selected, it will default to blue.
• R
andom: Cycles through the light modes, changing every 3 – 5 seconds. Static Color and
Utility Mode is not included in the random cycle.
• U
tility Mode: All LEDs light up solid white.
• O
ff: All LEDs are o.
ION Audio Block Rocker
®
Icon User Guide 17
U
sing the Radio
To use the radio, press the Source button so that FM is selected and shown on the display.
While in FM mode, briefly press the P
revious and Next buttons (</>) to move to the previous
or next station. Press and hold the <
/> buttons to seek for the next strongest station in that
direction.
T
o save a radio station as a preset:
1. Press and hold the P
lay/Pause button.
2. Use the <
/> buttons to select a preset number, 1–12, shown on the display.
3. When you have selected the desired preset number, quickly press and release the
P
lay/Pause button again to save it.
T
o recall a previously saved preset, press and release the Play/Pause button to cycle
through the saved presets.
1 - HOLD
2 - PRESS - Select Preset
3 - PRESS
PRESS
PRESS - Previous / Next Station
HOLD - Seek
ION Audio Block Rocker
®
Icon User Guide 18
U
SB Mode
When a USB drive with compatible files is inserted into the U
SB Charge/Playback Port, Block
Rocker® Icon will automatically switch to USB mode. If the USB drive has already been inserted
and you are using another mode, press the S
ource button until USB mode is selected.
Block Rocker® Icon will automatically play the first compatible MP3 file. Files are played in
alphabetical order of what is on the root level, then alphabetical by folder, and then
alphabetical by track name. Media playback will stop when all media has been played on the
USB drive. Press the N
ext and Previous (</>) buttons to go to the next or previous track.
Press and hold these buttons to fast forward or rewind within the track.
Note: The USB drive must have playable MP3 files for it to appear on the media panel’s display.
With each press of the S
tereo-Link™ / Repeat button the following Repeat settings will cycle
through on the display:
• Play the current USB track on repeat (O
nE). This is the default mode when powered on.
• Play the tracks in random order (r
An).
• Play all the tracks on the USB drive on repeat (A
LL).
• Play the current folder’s tracklist on repeat (F
OLd). The folder used is based on what song
is playing when it is activated. For instance, if a song playing is on the root level, selecting
F
OLd will repeat only songs at the root level. If a song is in folder “A”, then only songs in
folder “A” will be repeated.
1 - CONNECT AND PRESS
3 - PRESS
(Previous/Next Track)
4 - PRESS TO CYCLE
(ALL, FOLDER, ONE RANDOM)
2 - PRESS
(Play/Pause Playback)
ION Audio Block Rocker
®
Icon User Guide 19
U
sing the USB Charge Port
To use the USB charge port:
1. Connect a USB type-A cable to the U
SB Charge Port on the front panel of your Block
Rocker® Icon speaker (see image).
2. Connect the other end of the cable to the charging input on your smartphone, tablet, or
other compatible device.
ION Audio Block Rocker
®
Icon User Guide 20
App Control
IMPORTANT: To ensure the best possible experience with the app, use the most current
Android OS or iOS on your device.
Follow these steps to download the free app on your device:
1. Open the Apple App Store or Google Play on your device. Then, search for the ION Sound
Control™ app.
2. Follow the on-screen instructions to download and install the app. Once downloaded, the
ION Sound Control™ app will appear on your device's home screen.
3. Connect your device to Block Rocker® Icon via Bluetooth. See Operation > Pairing a
Bluetooth® Device to learn how to do this.
4. Open the ION Sound Control™ app. If prompted, allow the app to access your device's
Bluetooth and Location Services.
5. Follow the steps on screen to find and connect to your Block Rocker® Icon. Once connected,
you can control various functions of the speaker, such as:
• Speaker and Mic Volume: Adjust the volume of the speaker and the Mic input.
• FM Radio Presets: Select from previously saved radio station presets and also save
radio presets.
• EQ: Adjust the speaker's equalization.
• Lights: Change the light modes.
• Voice Prompts: Enable or disable the voice prompts.
• Battery Life: Check the speaker’s battery life status.
• Over-The-Air Firmware Updates: Stay up to date with the latest firmware installation.
• Support: Visit ionaudio.com, contact Technical Support, and view Warranty
information and Frequently Asked Questions.
ION Audio Block Rocker
®
Icon User Guide 21
I
f the sound is distorted: You may need to adjust the levels of your sources and Block Rocker®
Icon for proper mixing.
i. First, turn your source volume all the way up.
ii. Finally, adjust the V
olume +/- buttons to get an appropriate level.
If the sound is still distorted, try lowering the volume control of your sound source, then
use the V
olume +/- buttons on Block Rocker® Icon to lower the sound.
I
f the unit is not charging: Make sure the power cable is properly connected to the power
input and the power outlet.
I
f the sound is distorted: Try lowering the volume control of your sound source.
I
hear a hum when cables are connected:
• Disconnect cables from the input jacks to see if it’s a faulty cable.
• Make sure the signal cables are not placed near power cables.
• Connect all audio equipment power cables to outlets which share a common ground.
I
f there is a high-pitched whistling noise when using microphones: This is probably
feedback. Point the microphone away from the speaker.
I
f you can’t hear the microphone over the music volume: Turn down the music volume from
your source or increase the microphone volume using the M
ic + button.
I
f you cannot connect your audio device to Block Rocker® Icon via Bluetooth:
• Have your audio device (e.g., smartphone or tablet) and Block Rocker® Icon as close
together as possible while trying to connect. Make sure both the audio device and Block
Rocker® Icon are unobstructed by walls, furniture, etc.
• Press and hold the B
luetooth button to disconnect Block Rocker® Icon
from any other
audio device and restart the search process. If this does not work right away, power o
Block Rocker® Icon and then power it back on. See O
peration > Pairing a Bluetooth®
D
evice for more information.
• Reset the Bluetooth connection on your audio device by turning Bluetooth o and back
on. You can find this under the Bluetooth menu in the Settings for your phone or other
audio device.
TROUBLESHOOTING
ION Audio Block Rocker
®
Icon User Guide 22
If this does not work, and you have connected to Block Rocker® Icon
before, find Block
Rocker® Icon in the list of available or previously connected devices in your audio device's
Bluetooth menu, tap the "gear" or “i” icon located next to it and then select U
npair or
F
orget. Turn Block Rocker® Icon o and back on and try pairing again once it reappears in
your available devices list.
Note: If Block Rocker® Icon has been paired to another audio device recently that is still
within range, you may need to repeat this process with that audio device to fully
disconnect.
I
f you experience audio dropouts while playing music from a Bluetooth device, this may be
happening because your unit is trying to link to another speaker. This can occur if you power
o a speaker that was linked to your unit or if you have just turned on your unit and it is in
Stereo-Link™ mode. To stop the audio dropouts, exit Stereo-Link™ mode by double-pressing
the S
tereo-Link™
/ Repeat button. Alternatively, you can wait for your unit to link to another
speaker if there is one within range.
Press and hold both P
revious / Next buttons for 5 seconds to reset the speaker to factory
defaults.
ION Audio Block Rocker
®
Icon User Guide 23
Technical Specifications
O
utput Power 180 W (peak)
Speakers Low Frequency: 10.0” (254 mm) woofer
H
igh Frequency: 3.0” (76.2 mm) tweeter
F
ull-Range Driver (sides): (2) 3.0” (76.2 mm)
Water Resistance IPX5
Frequency Response 40 Hz – 20 kHz (-10dB)
USB Supported File System: FAT32
S
upported File Types: MP3
M
aximum File Size: 4 GB
M
aximum USB Storage Size: 128 GB
Bluetooth Profile: A2DP, AVRCP
B
luetooth Version: 5.2
R
ange: Up to 100 ft. (30.5 m) *
S
tereo-Link™ Range: Up to 75 ft. (22.9 m) between speakers
Battery Capacity: 11.1 V/6000 mAh, 66.6 Wh
B
attery Life: Up to 30 hours **
C
harge Time: Up to 3 hours
Power Cable: IEC (C13) Power Cable
I
nput Voltage: 100-240 V~, 50/60 Hz, 100 W
Dimensions
(width x depth x height)
16.93” x 11.02” x 20.0” / 430 x 280 x 508
Weight 22.51 lbs. / 10.21 kg
Specifications are subject to change without notice.
* Bluetooth and wireless reception and range are aected by walls, obstructions, and
movement. For optimal performance, place the product so it is unobstructed by walls or
furniture and is raised o the ground.
** Battery life may vary based on temperature, age, and volume usage of product.
APPENDIX
ION Audio Block Rocker
®
Icon User Guide 24
T
rademarks & Licenses
ION Audio is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such
marks by ION Audio is under license.
App Store is a trademark of Apple Inc., registered in the U.S. and other countries.
Android and Google Play are registered trademarks of Google Inc. All other product names,
company names, trademarks, or trade names are those of their respective owners.
