Quic k Us er Manual
Package Contents
LED Neon Sign x 1
Power Adaptor x 1
Hanging Chain x 2
Mounng
The two hangers of hanging chain are located on the
top of the sign and have holes intended for using the
provided S hooks and chain pack. Use the hangers
when display the sign in a suspended locaon. Adjust
the chain as necessary to achieve desired posion.
NOTE: The ceiling hooks need to be mounted in a
surface that will support a minimum of 50 lbs.
IMPORTANT
Keep your purchase receipt. It is required for warranty.
Please read instrucon carefully
Always handle your OPEN sign with care
This product is intended for INDOOR USE ONLY! Not
intended for wet or damp locaons
Only operate at voltage that meets the product label.
Never use this product with an external dimmer
Do not locate your OPEN sign in an area that will exceed
125°F (52°C)
If window mounng, please allow 2” minimum spacing
between front of sign and the window pane
Installaon Guideline
HAZARD: Voltage can cause shock, burn, or death!
WANRING: Changes or modificaons to this unit are not expressly approved by
the party responsible for compliance could void the users authority to operate
the equipment.
NOTE: These limits are designed to provide reasonable protecon against
harmful interference in a residenal installaon. This equipment generates,
uses and can radiate radio frequency energy and, if not insta
lled and used in
accordance with the instrucons, may cause harmful interference to radio
communicaons.
Determine the best locaon for your OPEN sign, please consider the following:
Select locaon to prevent incidental contact or damage to your OPEN
sign.
This product is intended for INDOOR USE ONLY! Not intended for wet or
damp locaons.
Select locaon, within 6 feet of a properly grounded outlet. Do not us
e
extension cords or adaptors.
You will want your OPEN sign to be visible for average traffic (walking or
driving). Keep in mind parked vehicles may block the visibility of your
sign. If so you should consider raising it or moving to another area of
window.
Specificaons
Model:
BT-50
Material:
Front: Silicone
Back Board: PS
LED Beads Brightness:
18lm
LED Beads Qty:
2835
Package Weight:
1kg
Power:
24W
Adaptor:
12V 2 A
Aer Installaon / Operaon
1. Route the power cord in a safe manner to the outlet. Note: Your OPEN
sign must be installed properly into a grounded outlet. Secure the cord
by es or any non-metal straps if necessary.
2. To operate your OPEN sign, use the ON/OFF switch.
Remote Control x 1
Screw x 4
Scker x 4
LED
Neon Sign
