L31
IMN200800AV-E 03/16
03
!
!
!
02
!
!
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
. .
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
. .
0504
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
. .
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
. .
0706
°
Allows user to direct air away from face.
For increased comfort and control.
Rugged and comfortable resulting in a light-
weight tool great for extended use.
Protect working surface from damage.
Depth is easily adjustable for various
applications.
!
!
!
!
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
. .
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
. .
I
19mm3/4”
1”
1-1/4”
1-3/8”
1-1/2”
1-5/8”
1-3/4”
2”
25mm
32mm
35mm
38mm
40mm
45mm
50mm
0.118”(3mm)
1.6 x 1.4mm
(0.063” x 0.055”)
10mm3/8”
5/8”
3/4”
1”
1-1/4”
1-3/8”
1-1/2”
1-5/8”
1-3/4”
2”
15mm
20mm
25mm
32mm
35mm
38mm
40mm
45mm
50mm
0.079”(2mm)
1.26 x 1.05mm
(0.050” x 0.041”)
1/4”(5.7mm)
1.26 x 1.05mm
(0.050” x 0.041”)
13mm
5/8”
3/4”
1”
1-1/4”
1-1/2”
1-5/8”
16mm
19mm
25mm
32mm
38mm
40mm
18Ga. 18Ga.16Ga.
0908
!
!
!
!
!
The tool is specially designed for single sequential
mode. This mode requires the trigger to be pulled
each time a fastener is driven. The tool can be
actuated by depressing the WCE against the work
surface followed pulling the trigger.
The trigger must be released to reset the tool before
another fastener can be driven.
!
!
!
!
!
Disconnect the air supply from the tool.
Remove all fasteners from the magazine.
Make sure the trigger and work contact element
move freely up and down without sticking or
binding.
Reconnect air supply to the tool.
Depress the work contact element against the
work surface without pulling the trigger. The tool
must not operate. Do not use the tool if it
operates without pulling the trigger. Personal
injury may result.
Remove the tool from the work surface. The
work contact element (WCE) must return to its
original down position. The tool must not
operate. Do not use the tool if it operates while
lifted from the work surface. Personal injury may
result.
Pull the trigger and depress the work contact
element(WCE) against the work surface. The
tool must not operate.
Depress the work contact element (WCE)
against the surface. Pull the trigger, the tool
must operate.
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
. .
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
. .
!
11
10
!
!
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
. .
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
. .
check it after unpacking.
-
!
!
13
12
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
. .
HTTP://WWW NUMAXTOOLS COM 1-888-669-5672
. .
