SAFETY | WARRANTY | TROUBLESHOOTING
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic
safety precautions should always be followed, including the following:
FOR HOUSEHOLD USE ONLY
READ ALL INSTRUCTIONS BEFORE USING—SAVE THESE INSTRUCTIONS
WARNINGS: KEEP AWAY FROM WATER
DANGER—
As with most electrical appliances, electrical parts are electrically live even when the switch is o.
WARNING
To reduce the risk of death by electric shock:
1. Always unplug the unit immediately after using.
2. Do not use while bathing.
3. Do not place or store appliance where it can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or other liquid.
5. If an appliance falls into water, unplug the unit immediately. Do not reach into the water.
WARNING
To reduce the risk of burns, electrocution, fire, or injury to persons:
1. An appliance should never be left unattended when plugged in.
2. Close supervision is necessary when this appliance is used by, on, or near children or
individuals with certain disabilities.
3. Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or
if it has been dropped, damaged, or dropped into water.
5. Keep the cord away from heated surfaces.
6. Do not wrap the cord around the appliance.
7. Never block the air openings of the appliance or place it on a soft surface, such as a bed or
couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and
the like.
8. Never use while sleeping.
TECHNICAL SPECIFICATIONS Voltage: 220-240V 50-60Hz | Power 1500W
© 2024 Shark Ninja Operating LLC: SHARK and SHARK FLEXFUSION are registered trademarks in the United Kingdom of SharkNinja Operating LLC.
HD600UK_Series_Warning_Insert_MP_Mv1_241011
For accessories and replacement parts,
visit sharkclean.co.uk/accessories
SCAN QR CODE FOR FULL
INSTRUCTIONS, WARRANTY
INFORMATION, AND HOW-TOS
Do not use this appliance
near bathtubs, showers,
basins or other vessels
containing water.
SAVE THESE INSTRUCTIONS
9. Never drop or insert any object into any opening.
10. Do not use outdoors or operate where aerosol (spray) products are being used or where
oxygen is being administered.
11. Do not use an extension cord with this appliance.
12. Do not direct hot air toward eyes or other heat-sensitive areas.
13. Attachments may be hot during use. Allow them to cool before handling.
14. Do not place appliance on any surface while it is operating.
15. While using the appliance, keep your hair away from the air inlets.
16. Do not operate with a voltage converter.
17. Only use the appliance with the voltage, frequency and power shown on the rating label on
the product.
18. Do not use this appliance on hair extensions or wigs unless recommended by the hair
extension or wig manufacturer.
19. If hair styling product is being used in conjunction with this appliance please read and follow
all of the hair styling product safety warnings and instructions before use.
20.
In a double-insulated appliance, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated appliance, nor should
a means of grounding be added to the appliance. Servicing a double-insulated appliance
requires extreme care and knowledge of the system, and should be done only by qualified
service personnel. Replacement parts for a double-insulated appliance must be identical
to the parts they replace. A double-insulated appliance is marked with words “DOUBLE
INSULATION” or “DOUBLE INSULATED.” The symbol (square within a square) may also
be marked on the appliance.
1. Turn the styler on and o by toggling the 3-position switch.
Wet Hair drying and styling is at the top of the toggle and Dry
Hair styling/refresh is in the middle of the toggle.
2. Adjust the airflow. Pressing the button allows you to choose
a low, medium, or high airflow.
3. Adjust the temperature. Pressing the button allows you to
choose no heat, low, medium, or high temperature. For Scalp
Shield, press and hold Temperature button for 2 seconds.
4. Press and hold the Cool Shot button for a cool burst of air to
set your style.
5. To attach any accessory included with your styler, line up the
open arrow on the back of the accessory with the arrow on the
back of the styler. Press and twist the accessory into the styler’s
nozzle toward the left so the solid arrow on the accessory lines
up with the arrow on the back of the styler. The accessory is
properly attached when it clicks into place.
6. To remove an accessory from the styler, slide the top lock down,
then lift and simultaneously twist the accessory to the right and
lift it o the styler’s nozzle by holding onto the cool touch points.
To detach the Fusion Air Straightener, it is recommended to hold
the styler in your left hand while using your right hand to unlock
and remove the Fusion Air Straightener at the same time. Your
thumb will pull down the lock while your hand twists and pulls up
to release.
7. To change from styling wand mode to hair dryer mode, slide
down the lock and rotate the nozzle left. Keep rotating the noz
-
zle until it clicks into place in hair dryer mode. To change from
hair dryer mode to styling wand mode, slide down the lock and
rotate the nozzle right.
8. To remove the filter cover, slide it o the bottom of the unit.
To attach the filter cover, slide it back on to the bottom of
the unit until it clicks in place.
9. Press the RCD button to rest the dryer. See Troubleshooting &
Error Codes for more information.
10. Rating label location.
For further operating instructions, scan the QR
code on the cover of this booklet.
Storage, Cord Safety, and Maintenance/Cleaning:
• Ensure the cord is not knotted, twisted, or wrapped around
any nearby objects when in use.
• Store the unit in a dry location away from water and other
heat sources. Store brush accessories so the bristles are not
touching any surfaces to help prevent bristle damage.
• Clean the filter at the bottom of the unit monthly. To clean the
filter, first slide the filter cover o the bottom of the unit. Then
use a new toothbrush to brush o any dust or debris on the
filter. Once the filter is clean, slide the filter cover back on the
unit until it clicks in place.
• Remove any hair on the brush accessories after every use to
help maintain performance.
OPERATING INSTRUCTIONS
4
5
1
2
3
6
7
8
10
RESET
TEST
TEST BEFORE USE
WARNING:
1. PLUG INTO RECEPTACLE.
2. PRESS RESET BUTTON:
INDICATOR SHOULD BE “ON”.
3. PRESS TEST BUTTON:
INDICATOR SHOULD BE “OFF”.
4. PRESS RESET BUTTON FOR USE.
DO NOT USE IF TEST FAILS.
9
TECHNICAL SPECIFICATIONS Voltage: 220-240V 50-60Hz | Power 1500W
© 2024 Shark Ninja Operating LLC: SHARK and SHARK FLEXFUSION are registered trademarks in the United Kingdom of SharkNinja Operating LLC.
HD600UK_Series_Warning_Insert_MP_Mv1_241011
For accessories and replacement parts,
visit sharkclean.co.uk/accessories
SCAN QR CODE FOR FULL
INSTRUCTIONS, WARRANTY
INFORMATION, AND HOW-TOS
Do not use this appliance
near bathtubs, showers,
basins or other vessels
containing water.
SAVE THESE INSTRUCTIONS
9. Never drop or insert any object into any opening.
10. Do not use outdoors or operate where aerosol (spray) products are being used or where
oxygen is being administered.
11. Do not use an extension cord with this appliance.
12. Do not direct hot air toward eyes or other heat-sensitive areas.
13. Attachments may be hot during use. Allow them to cool before handling.
14. Do not place appliance on any surface while it is operating.
15. While using the appliance, keep your hair away from the air inlets.
16. Do not operate with a voltage converter.
17. Only use the appliance with the voltage, frequency and power shown on the rating label on
the product.
18. Do not use this appliance on hair extensions or wigs unless recommended by the hair
extension or wig manufacturer.
19. If hair styling product is being used in conjunction with this appliance please read and follow
all of the hair styling product safety warnings and instructions before use.
20.
In a double-insulated appliance, two systems of insulation are provided instead of
grounding. No grounding means is provided on a double-insulated appliance, nor should
a means of grounding be added to the appliance. Servicing a double-insulated appliance
requires extreme care and knowledge of the system, and should be done only by qualified
service personnel. Replacement parts for a double-insulated appliance must be identical
to the parts they replace. A double-insulated appliance is marked with words “DOUBLE
INSULATION” or “DOUBLE INSULATED.” The symbol (square within a square) may also
be marked on the appliance.
1. Turn the styler on and o by toggling the 3-position switch.
Wet Hair drying and styling is at the top of the toggle and Dry
Hair styling/refresh is in the middle of the toggle.
2. Adjust the airflow. Pressing the button allows you to choose
a low, medium, or high airflow.
3. Adjust the temperature. Pressing the button allows you to
choose no heat, low, medium, or high temperature. For Scalp
Shield, press and hold Temperature button for 2 seconds.
4. Press and hold the Cool Shot button for a cool burst of air to
set your style.
5. To attach any accessory included with your styler, line up the
open arrow on the back of the accessory with the arrow on the
back of the styler. Press and twist the accessory into the styler’s
nozzle toward the left so the solid arrow on the accessory lines
up with the arrow on the back of the styler. The accessory is
properly attached when it clicks into place.
6. To remove an accessory from the styler, slide the top lock down,
then lift and simultaneously twist the accessory to the right and
lift it o the styler’s nozzle by holding onto the cool touch points.
To detach the Fusion Air Straightener, it is recommended to hold
the styler in your left hand while using your right hand to unlock
and remove the Fusion Air Straightener at the same time. Your
thumb will pull down the lock while your hand twists and pulls up
to release.
7. To change from styling wand mode to hair dryer mode, slide
down the lock and rotate the nozzle left. Keep rotating the noz
-
zle until it clicks into place in hair dryer mode. To change from
hair dryer mode to styling wand mode, slide down the lock and
rotate the nozzle right.
8. To remove the filter cover, slide it o the bottom of the unit.
To attach the filter cover, slide it back on to the bottom of
the unit until it clicks in place.
9. Press the RCD button to rest the dryer. See Troubleshooting &
Error Codes for more information.
10. Rating label location.
For further operating instructions, scan the QR
code on the cover of this booklet.
Storage, Cord Safety, and Maintenance/Cleaning:
• Ensure the cord is not knotted, twisted, or wrapped around
any nearby objects when in use.
• Store the unit in a dry location away from water and other
heat sources. Store brush accessories so the bristles are not
touching any surfaces to help prevent bristle damage.
• Clean the filter at the bottom of the unit monthly. To clean the
filter, first slide the filter cover o the bottom of the unit. Then
use a new toothbrush to brush o any dust or debris on the
filter. Once the filter is clean, slide the filter cover back on the
unit until it clicks in place.
• Remove any hair on the brush accessories after every use to
help maintain performance.
OPERATING INSTRUCTIONS
4
5
1
2
3
6
7
8
10
RESET
TEST
TEST BEFORE USE
WARNING:
1. PLUG INTO RECEPTACLE.
2. PRESS RESET BUTTON:
INDICATOR SHOULD BE “ON”.
3. PRESS TEST BUTTON:
INDICATOR SHOULD BE “OFF”.
4. PRESS RESET BUTTON FOR USE.
DO NOT USE IF TEST FAILS.
9
TWO (2) YEAR LIMITED WARRANTY
When a consumer buys a product in the UK, they get the ben-
efit of legal rights relating to the quality of the product (your
“statutory rights”). You can enforce these rights against your
retailer. However, at Shark we are so confident about the qual
-
ity of our products that we give you an additional manufactur-
er’s guarantee of up to two years (one year, plus an additional
year upon registration). Oer valid only in the United Kingdom.
These terms and conditions relate to our manufacturer’s guar
-
antee only – your statutory rights are unaected.
The conditions below describe the prerequisites and scope of
our guarantee. They do not aect your statutory rights or the
obligations of your retailer and your contract with them.
Shark® Guarantees
Your Shark unit constitutes a sizeable investment. Your new
hairdryer needs to work properly for as long as possible. The
guarantee it comes with is an important consideration - and re
-
flects how much confidence the manufacturer has in its product
and manufacturing quality.
Every Shark machine comes with a free parts and labour guar
-
antee. Our customer service helpline (0800 862 0453) is open
from 9.00am to 6.00pm Monday - Friday. It’s free to call and
you’ll be put straight through to a Shark representative. You’ll
also find online support at
sharkclean.co.uk
How do I register my Shark® guarantee?
Purchases made from the Shark website are automatically
registered for the two year extended guarantee.
You can register your guarantee online within 28 days of
purchase. To save time, you’ll need the following information
about your hairdryer:
• Date you purchased the unit (receipt or delivery note).
To register online, please visit sharkclean.co.uk
IMPORTANT
• The guarantee will only cover your product from the date of
purchase.
• Please keep your receipt at all times. Should you need to
use your guarantee we will need your receipt to verify the
information you have supplied to us is correct. The inability to
produce a valid receipt may invalidate your guarantee.
What are the benefits of registering my free Shark®
guarantee?
When you register your guarantee we’ll have your details to
hand if we ever need to get in touch.
You can also receive tips and advice on how to get the best out
of your Shark unit and hear the latest news about new Shark®
technology and launches. If you register your guarantee online,
you’ll get instant confirmation that we’ve received your details.
How long are new Shark® machines guaranteed for?
Our confidence in our design and quality control means that
your new Shark unit is guaranteed for up to two years (initial
one-year guarantee and the additional one-year extension
upon registration).
What is covered by the free Shark® guarantee?
Repair or replacement of your Shark machine (at Shark’s
discretion), including all parts and labour. A Shark guarantee is
in addition to your statutory rights as
a consumer.
What is not covered by the free Shark® guarantee?
1. Normal wear and tear of wearable parts (such as acces
-
sories). Replacement parts are available for purchase at
sharkclean.co.uk
2. Damage caused by misuse, abuse, negligent handling,
failure to perform required maintenance or damage due to
mishandling in transit.
3. Damage caused by maintenance not authorised
by Shark.
Where can I buy genuine Shark® spares and accessories?
Shark spares and accessories are developed by the same engi
-
neers who developed your Shark unit. You’ll find a full range of
Shark spares and replacement parts/accessories for all Shark
machines at Sharkclean.co.uk
Please remember that damage caused by the use of non-Shark
spares may not be covered under your guarantee.
MAINTENANCE/CLEANING
Reduction in Airflow.
Make sure you are not covering the filter cover with your hand
when operating the unit. This will block the air inlet, which
could cause a reduction in airflow. A change in airflow or air
power, airflow blockages, and/or visible buildup on the inlet
at the bottom of the unit could also indicate your unit needs
to be cleaned. To maintain performance, clean the filter at the
bottom of the unit every month, using a new toothbrush.
Removing the Filter
1. Turn o the device and unplug it. Slide the filter cover o the
bottom of the unit.
Cleaning the Filter
1. Wipe down the filter with a dry microfiber cloth or a new
toothbrush to remove the debris.
2. To reinstall the filter cover, slide it back on to the bottom of the
device until it clicks into place.
Maintaining Fusion Accessory Connection Pins.
Keep pins clean for best performance. If you notice any debris on
accessory pins, wipe clean with a dry cloth. Do not rest accessories
on wet surfaces. Ensure pins are clean before every use.
RCD OPERATION
Electricity flickers or trips circuit breaker during use.
This dryer is equipped with a Residual Current Device (RCD),
a safety feature that renders it inoperable under abnormal
conditions. The RCD Reset button must be pressed any time
the device is plugged in for use, otherwise it will not turn on.
Should the device turn o in use, ensure there are no other
appliances plugged in within the room where the dryer is being
used. Do not use the dryer with a extension lead.
OVERHEATING
Hair dryer is overheating or shuts o.
This unit is equipped with a temperature-protective
thermostat. If for some reason your hair dryer overheats, the
thermostat will automatically turn the unit o. To prevent
power-down recurrence, unplug the hair dryer and set it
aside to cool, or cool down using the Cool Shot button during
use. Overheating may result if the unit is powered on for a
long duration, or can indicate a blockage or dust buildup. To
prevent overheating, clean the filter at the bottom of the unit
every month, using a new toothbrush. Make sure you are not
covering the filter with your hand when operating the unit, as
this could also cause overheating. If overheating continues to
occur, contact Customer Service at 0800 862 0453.
TROUBLESHOOTING & ERROR CODES
If you are experiencing a dierent error code,
please scan the QR code for additional troubleshooting or con-
tact Customer Service at 0800 862 0453.
Overheating
Error Code
TWO (2) YEAR LIMITED WARRANTY
When a consumer buys a product in the UK, they get the ben-
efit of legal rights relating to the quality of the product (your
“statutory rights”). You can enforce these rights against your
retailer. However, at Shark we are so confident about the qual
-
ity of our products that we give you an additional manufactur-
er’s guarantee of up to two years (one year, plus an additional
year upon registration). Oer valid only in the United Kingdom.
These terms and conditions relate to our manufacturer’s guar
-
antee only – your statutory rights are unaected.
The conditions below describe the prerequisites and scope of
our guarantee. They do not aect your statutory rights or the
obligations of your retailer and your contract with them.
Shark® Guarantees
Your Shark unit constitutes a sizeable investment. Your new
hairdryer needs to work properly for as long as possible. The
guarantee it comes with is an important consideration - and re
-
flects how much confidence the manufacturer has in its product
and manufacturing quality.
Every Shark machine comes with a free parts and labour guar
-
antee. Our customer service helpline (0800 862 0453) is open
from 9.00am to 6.00pm Monday - Friday. It’s free to call and
you’ll be put straight through to a Shark representative. You’ll
also find online support at
sharkclean.co.uk
How do I register my Shark® guarantee?
Purchases made from the Shark website are automatically
registered for the two year extended guarantee.
You can register your guarantee online within 28 days of
purchase. To save time, you’ll need the following information
about your hairdryer:
• Date you purchased the unit (receipt or delivery note).
To register online, please visit sharkclean.co.uk
IMPORTANT
• The guarantee will only cover your product from the date of
purchase.
• Please keep your receipt at all times. Should you need to
use your guarantee we will need your receipt to verify the
information you have supplied to us is correct. The inability to
produce a valid receipt may invalidate your guarantee.
What are the benefits of registering my free Shark®
guarantee?
When you register your guarantee we’ll have your details to
hand if we ever need to get in touch.
You can also receive tips and advice on how to get the best out
of your Shark unit and hear the latest news about new Shark®
technology and launches. If you register your guarantee online,
you’ll get instant confirmation that we’ve received your details.
How long are new Shark® machines guaranteed for?
Our confidence in our design and quality control means that
your new Shark unit is guaranteed for up to two years (initial
one-year guarantee and the additional one-year extension
upon registration).
What is covered by the free Shark® guarantee?
Repair or replacement of your Shark machine (at Shark’s
discretion), including all parts and labour. A Shark guarantee is
in addition to your statutory rights as
a consumer.
What is not covered by the free Shark® guarantee?
1. Normal wear and tear of wearable parts (such as acces
-
sories). Replacement parts are available for purchase at
sharkclean.co.uk
2. Damage caused by misuse, abuse, negligent handling,
failure to perform required maintenance or damage due to
mishandling in transit.
3. Damage caused by maintenance not authorised
by Shark.
Where can I buy genuine Shark® spares and accessories?
Shark spares and accessories are developed by the same engi
-
neers who developed your Shark unit. You’ll find a full range of
Shark spares and replacement parts/accessories for all Shark
machines at Sharkclean.co.uk
Please remember that damage caused by the use of non-Shark
spares may not be covered under your guarantee.
MAINTENANCE/CLEANING
Reduction in Airflow.
Make sure you are not covering the filter cover with your hand
when operating the unit. This will block the air inlet, which
could cause a reduction in airflow. A change in airflow or air
power, airflow blockages, and/or visible buildup on the inlet
at the bottom of the unit could also indicate your unit needs
to be cleaned. To maintain performance, clean the filter at the
bottom of the unit every month, using a new toothbrush.
Removing the Filter
1. Turn o the device and unplug it. Slide the filter cover o the
bottom of the unit.
Cleaning the Filter
1. Wipe down the filter with a dry microfiber cloth or a new
toothbrush to remove the debris.
2. To reinstall the filter cover, slide it back on to the bottom of the
device until it clicks into place.
Maintaining Fusion Accessory Connection Pins.
Keep pins clean for best performance. If you notice any debris on
accessory pins, wipe clean with a dry cloth. Do not rest accessories
on wet surfaces. Ensure pins are clean before every use.
RCD OPERATION
Electricity flickers or trips circuit breaker during use.
This dryer is equipped with a Residual Current Device (RCD),
a safety feature that renders it inoperable under abnormal
conditions. The RCD Reset button must be pressed any time
the device is plugged in for use, otherwise it will not turn on.
Should the device turn o in use, ensure there are no other
appliances plugged in within the room where the dryer is being
used. Do not use the dryer with a extension lead.
OVERHEATING
Hair dryer is overheating or shuts o.
This unit is equipped with a temperature-protective
thermostat. If for some reason your hair dryer overheats, the
thermostat will automatically turn the unit o. To prevent
power-down recurrence, unplug the hair dryer and set it
aside to cool, or cool down using the Cool Shot button during
use. Overheating may result if the unit is powered on for a
long duration, or can indicate a blockage or dust buildup. To
prevent overheating, clean the filter at the bottom of the unit
every month, using a new toothbrush. Make sure you are not
covering the filter with your hand when operating the unit, as
this could also cause overheating. If overheating continues to
occur, contact Customer Service at 0800 862 0453.
TROUBLESHOOTING & ERROR CODES
If you are experiencing a dierent error code,
please scan the QR code for additional troubleshooting or con-
tact Customer Service at 0800 862 0453.
Overheating
Error Code
STYLING QUIZ
SCAN FOR PERSONALISED VIDEOS
Take the quiz and get how-to video
content perfect for your hair type.
