I worked really hard
on this manual -
so please read it...
XOU24WW
G_
WINE & WEED PRESERVATION SYSTEMS
WATCH THE INSTALLATION
VIDEO ON OUR CHANNEL
Before You Get Started
Safety Instructions
Electrical and Grounding Instructions
Care and Cleaning
Helpful Hints
Cleaning the Interior / Exterior
FAQ’s
Cannabis Storage & Humidity
Warranty
4 - 7
Installation Instructions
Sizes and Installation Dimensions
Leveling Your XO
8 - 14
21 - 22
23 - 24
3
where things are
please read and follow
all safety instructions
It’s for your
own good...
Honest.
Installer Checklist
Find Your Model
Operating Instructions
Control System Overview
Setting the Temperature
Functions
Capacities
15 - 20
Integrated Panel Dimensions
Product Overview
Preservation Tips
4
the job isn’t done until
To ensure that the installation process is successfully completed,
here are few things to review...
Is the unit plugged in?
Are the controls on? (Panel will illuminate.)
Are the controls operating correctly?
Has the unit been properly leveled - both side to side and front to back -
with all 4 leveling feet securely making contact with the floor?
This is an OVERLAY unit - have the panels been securely attached and properly aligned?
Is the door sealing properly?
Is the handle secure?
Have you thoroughly inspected all surfaces for any imperfections?
Have you reviewed this manual with the customer and explained the unit’s operation and care?
Has the customer received copies of the literature and keys?
Have you properly disposed of all packing materials properly (recycle, please)?
Is the custo
mer satisfied?
O
O
O
O
O
O
O
O
O
O
O
O
After installation, does the door open sufficiently to fully extend the shelves?
O
RISK OF CHILD ENTRAPMENT!
An empty refrigerator is a very dangerous attraction to children.
Remove door gaskets, latches, lids, lock and/or doors from unused or discarded appliances,
or take other actions to guarantee them harmless.
Always dispose of old appliances in accordance with local laws and regulations.
5
XOU24WWGO_ Panel Ready
XOU24WWGS_ SS & Glass
WINE & WEED VAULT
2
these are the models
covered in this
book
take a minute to circle your model above
and record your serial number
here in case you need it later
XOU24WWGB_ Black Glass
Please read through completely before using your XO Unit
To prevent damage to the door gasket, the door must be opened all the way before pulling racks out.
The appliance must be positioned so that the plug is accessible.
Empty your XO unit before attempting to move the appliance. Moving while loaded may damage or
distort the frame.
The compressor will get HOT during operation / touching it may cause injury.
During installation follow all safety tips provided in this manual / appropriate safety equipment such as
safety glasses and work gloves should be worn.
Two people should move or lift your XO unit to prevent injury or damage.
Remov
e all interior and exterior packing materials prior to installation and dispose of properly.
Never cover the bottle racks with foil or other material which will impede internal air circulation.
For maximum efficiency, keep the door tightly shut unless loading or unloading and never overload your
XO unit.
Before installing, allow your XO unit to sit upright for 2 hours at the install site. This will allow the cooling
system to stabilize after transportation. Failure to follow this step may cause problems.
Location
Your XO unit should be located away from direct sunlight and heat sources (stove, heaters, etc.) which may
increase electrical consumption. High or low ambient temperature may cause units to work improperly.
The floor must be strong enough to support your XO unit fully loaded.
Your XO unit must not be installed in areas of where water or e
xcessive moisture are present.
Your XO unit’s final installation must observe the correct minimum air clearances around and behind the
unit to ensure adequate ventilation. In addition, all ventilation openings must be kept clear and free of
obstructions, failure to do so will result in damage to the unit.
WARNING
NEVER use external heat sources to accelerate defrosting
NEVER permit unauthorized service or modifications to your XO unit
NEVER tamper with the sealed refrigerant system - this unit uses R600A Refrigerant which is flammable.
It should never be used in the vicinity of any flammable or explosive ignition sources.
ALWAYS FOLLOW THE ELECTRICAL SAFETY INSTRUCTIONS OUTLINED IN THIS MANUAL.
6
your safety matters
Never store perishable food products such as meat or cheese in your wine cooler.
Your XO unit must not be installed near
where flammable, corrosive or hazardous materials are present.
Failure To Follow All Electrical Safety Measures May Result in Serious Injury,
Fire Or Death
All electrical work should only be performed by an
experienced, licensed electrician.
All XO units MUST be grounded for safe operation and
come equipped with a
3 Prong molded cord/plug for that
purpose.
NEVER remove or disable the 3rd prong with an adapter.
NEVER use an extension cord to operate your XO unit.
Your XO unit is built to operate on 115V 60Hz and
should be plugged directly into a dedicated 15 amp
3 prong outlet. If you are uncertain as to the
voltage, amperage capacity or if the 3rd prong is
properly grounded - consult a licensed electrician.
To maximize the depth of the installation recess -
your outlet should be mounted flush with the wall.
Your XO unit should not share the circuit with any other
electrical devices as this may cause overloading,
overheating, blown fuses or tripping circuit breakers.
In a worst case this can pose a fire hazard.
NEVER handle your XO unit in wet conditions as this
can pose a severe danger of electric shock.
Exercise care when moving your XO unit to avoid
damage to the electrical cord. If the electrical cord of
your XO unit becomes worn or damaged it must be
replaced immediately by a qualified technician.
NEVER unplug your unit by pulling on the cord.
Unplug by gripping the plug firmly and pull out
straight from the outlet.
INDOOR USE ONLY:
This model is intended for indoor/interior
applications only and is not to be used in
installations that are open/exposed to natural
elements.
This unit is designed to operate between 60 F and
90 F. Higher ambient temperatures may reduce
the unit’s ability to reach low temperatures and/or
reduce performance.
For best performance, keep the unit out of direct
sunlight and away from heat generating equipment.
In climates where high humidity and dew points are
present, condensation may appear on outside surfaces,
particularly in non air conditioned spaces.
This is considered normal. The condensation will
evaporate when the humidity drops.
CAUTION
Damages caused by ambient extremes are not
covered by the warranty
SERVICE 115V - 60 Hz - 1 phase
AMPS 15 Amp Circuit Breaker
Requires a Dedicated Outlet
All electrical work must be performed by
a licensed electrician
7
Serious injury, fire or death...
Okay -
o
o
electricity - this is serious
8
a perfect fit
use free standing - or - install under counter
when installing an overlay door unit,
you might use a recessed outlet or
cut the adjoining cabinet wall to
reach an outlet there...
ALL XO UNDERCOUNTER
UNITS ARRIVE PRE-WIRED
WITH LOW PROFILE PLUGS
FOR EASY INSTALLATION
4"
7"
34 1/4” MIN
24”
90°
Door Swing
WALL
Clearance
Gap
IF THE DOOR CAN’T OPEN FULLY - YOU CAN’T PULL THE SHELVES OUT.
WHEN INSTALLING WITH
THE HINGE SIDE NEXT TO A WALL -
LEAVE ADEQUA
TE SPACE FOR
CABINET HANDLES
DOOR MUST BE ABLE TO OPEN
A MINIMUM OF 90 .
o
THE DOOR STOP IS SET AT 110 - BUT CAN BE REST TO 90 OR 140 IF NEEDED.
o
o o
9
a perfect fit
your xo is this big (
or small, as the case would be
)
XOU24WWGO_ & XOU24WWGS_ 24” MODELS
34
HIGH
1/8"
W
H
height & width
MODELS WITH OVERLAY DOORS
depth
23 3/4”
D
CUSTOM OVERLAY PANELS MAY ADD UP TO 3/4” IN OVERALL DEPTH
YOUR CHOICE OF CABINET HANDLES WILL ALSO ADD DEPTH
23 7/8" WIDE
90
o
110
o
140
o
DOOR MUST BE ABLE TO OPEN
90 MINIMUM TO ALLOW
SHELVES TO EXTEND
WITH THE DOOR
OPEN AT 90
THE UNIT HAS A
DEPTH OF 46 1/2”
o
”4/3 SSENKCIHT LENAP MUMIXAM
PANEL MAXIMUM WEIGHT: 20 lbs.
* FOR CABINET DOORS LONGER THAN 30” - CONSULT XO.
10
. 09 NEPO OT ELBA EB TSUM ROOD YALREVO ,RETNUO CREDNU NOITALLATSNI RETFA
o
23 3/4” (603mm)*
3 1/4” (82mm) min
5” (127mm) max
3 1/4” (82mm) min
5” (127mm) max
2 7/8”
(73mm)
min
5”
(127mm)
max
29 3/4”
(756mm)
min
30”
(762mm)
max**
overlay panel dimensions (xou24wwgo_ only)
Drill a hole at least 5/16” in diameter and
1” deep into the top and bottom of the
frame in the location shown.
TO ACCOMMODATE THE HINGE PINS
ON THE HINGE SIDE OF THE PANEL
2 7/8”
(73mm)
min
5”
(127mm)
max
* IF FRAME WIDTH EXCEEDS 23 3/4”
WHEN MOUNTING TO THE DOOR
ALIGN THE FRAME EVEN WITH THE
HINGE SIDE, LETTING THE EXCESS
OVERHANG THE HANDLE SIDE TO
AVOID INTERFERENCE WITH THE
ZERO CLEARANCE HINGE.
3/8”
13/32”
5/16” Dia.
OUTSIDE
DOOR SIDE
3/4” FRAME
3/4” FRAME
COPY AND CUT OUT
THESE HANDY
HOLE TEMPLATES
let’s face it
STAINLESS | GLASS
& BLACK GLASS
MODELS
SKIP TO PAGE 13
11
let’s face it
1. Remove the two screws that hold the toe kick in place.
Remove the toe kick and set aside.
2. Remove the three screws holding the lower hinge in place.
Remove the hinge and set aside.
3. Pull the door down away from the upper hinge to remove it
and lay it flat face down on a pad to prevent scratches.
4. Starting at one corner, gently pull the rubber door gasket out
of the channel. Lay it aside, flat. You will reinstall it shortly.
In the channel are 10 screw holes.
5. Attach your door handle to the frame, countersinking the screw
heads so the frame lays flat against the door..
6. Align the frame to the door. If the frame is wider than the door,
set the frame flush with the hinge side of the door, let the other side
overhang the door and clamp securely.
7 Using the (10) ST4-30 self-tapping screws supplied securely fasten
the frame to the door. Do not over tighten as screws may strip out.
WARNING: Screws are sized for 3/4” panel,
DO NOT USE these screws for thinner panels.
BEFORE BEGINNING - REST THE UNIT ON ITS BACK, WITH THE DOOR FACING UP
12
8. Remove the clamps and re-install the rubber gasket by pressing it into the slot making sure
it is evenly seated.
9. Place the door back in position and slide to up onto the upper hinge pin, then square it up
with the cabinet.
10. Replace the lower hinge using the three screws removed in Step 2.
11. Replace the toe kick using the two screws removed in Step 1.
ADJUSTMENT SCREWS
TOP BOTTOM
If the door requires adjustment,
the top and bottom hinge each
have adjustment screws.
Loosen the screws,
then with the door open,
raise the handle side to level
and re-tighten the screws.
The door hinge stop is set at 110 .
change it to either 90 or 140 .
Simply change the position of
the stop screw in the lower hinge
plate as shown.
o
oo
OPTIONAL
WATCH THE INSTALLATION
VIDEO ON OUR CHANNEL
https://www.youtube.com/channel/UCT-Ip-dM9hoPydpxZfrZzRA
www.xoappliance.com
13
get a grip
Handle Options - all handles will fit all models
A
B
C
A. Designer Round Handle
Stainless ships with XOU24WWGS*
Also available as an option in black
Stainless ships with XOU24WWGS*
B. Pro Style Round Handle
Stainless ships with XOU24WWGB
C. Designer Flat Handle
The XOU24WWGS - Stainless framed glass door model comes with both styles A & B
The XOU24WWGO - Panel ready model does not include finish panels or handles.
*
L
DO NOT NEGLECT THIS IMPORTANT STEP
Rotate to raise or lower the LEVELING LEGS located at each of the four corners until all four legs
are seated firmly on the floor and the interior floor of the unit is level both front to back and
side to side.
Failure to follow this important step may cause problems with proper door operation, excessive
condensation, vibration and noise.
14
it’s like zen - but cooler
get your level out
15
meet your xo
LOCK
FRONT COOLING VENTS
LEVELING LEGS
GLIDE OUT
BOTTLE RACKS
CONTROL PANEL
WINE & WEED PRESERVATION SYSTEM
XOU24WWG_
WHAT’S THAT NOISE...
You new XO is designed for quiet operation but you may hear some sounds your old unit didn’t
make. Because they are new you might be concerned, but they are usually normal. Sounds can
also be amplified by hard surfaces like flooring or tiles. Here is a description of the types of
sounds you might hear and what might be causing them.
may run longer than your old unit. You might also hear a pulsating or high pitched sound as the
compressor and fans adjust to improve performance. During defrosting cycles you may hear some
water running into the drip pan. The refrigerant may sometimes cause a rattling or gurgling sound
as it flows through the system and the you might hear clicking sounds as the unit starts and stops.
CANNABIS
STORAGE
DUAL
RECIRCULATION
FANS
WINE & WEED –
Wine and cannabis have a number of preservation conditions in common making them excellent
candidates to store together, providing the system is designed to accommodate those areas
where environmental requirements diverge.
LIGHT: Sunlight, specifically ultraviolet light, can be damaging to both cannabis and wine. In the
case of wine, it causes naturally occurring riboflavin and pantothenic acid to react with amino acids
Although sunlight and grow lights are beneficial to the growing plants, once harvested, UV causes
the cannabinoids present to deteriorate reducing potency. Your XO Wine & Wee
d is equipped
with double glazed thermopane glass that has a built-in UV blocker.
TEMPERATURE:
zones. Both wine and cannabis benefit from a controlled temperature environment, however
bottles of wine between 41
and 64 F. Heat and variations in temperature can damage wines.
As a general rule,
if you are unsure of what temperature to store a bottle at, 55
is generally considered to be ideal
for most vintages. Cannabis also benefits from storage in a cool, stable environment but ideally
should be kept at a temperature between 60
and 68 F. Temperatures below 70 help prevent
the growth of harmful mold. Your XOU24WW, comes preset from the factory at 65
F in the
upper zone for cannabis and 55
F in the lower zone for wine.
HUMIDITY:
reasons. With regard to wine storage, an ambient range of 50 - 70% humidity is usually adequate.
60% humidity is generally considered ideal. For all these reasons, it is a good idea to limit opening
and closing any wine cooler frequently. It is a good idea to keep it well stocked. Storing only a
few bottles can cause excess humidity and condensation to develop. When loading the wine
section, add bottles gradually rather th
an in large quantities which can cause broader temperature
variations for what you have stored already.
Cannabis, is more sensitive to an optimal humidity range. Cured weed is not dry, it should have
a moisture level of 10 - 12% for smoking. For this reason, your unit arrives with a supply of silicon
sealed glass jars to limit air exchange and for humidity control. We recommend the use of size 4
Boveda (or similar) humidity control packets with a rating of 58% RH. Use of these in a sealed
glass container have demons
trated the ability to limit evaporation of terpenes and the conversion
of THC to CBN helping preserve flavor, aroma and potency.
VIBRATION: Vibration is another element that can harm wine. Your XO Wine & Weed has design
features to aid in limiting the transmission of vibration to the bottles, however it is advisable to
install your wine & weed cooler in an area away from loudspeakers, power equipment, heavy floor
...and enjoy!
16
proper storage matters
your xo wine & weed preservation system
30
Red wine is typically stored at 54 to 58 , white wine is kept colder for serving.
cannabis storage
is easy with xo
The two compartmentalized
wooden drawers come complete with
twelve (12) tall glass display storage jars
and four (4) short glass jars.
Each jar is fitted with a silicon sealed
wooden cap.
Additional jar sets are available
for purchase.
XO Recommends the use of
BOVEDA Humidity packs to
help prevent the evaporation
of terpenes in storage jars
Size 4 | 58% RH
350ml 100 ml
temperature
Your unit remembers your last temperature settings in the event of a power
failure and automatically adjusts to the previous setting(s) when power is restored.
When the +/- button is pressed, your wine cellar automatically enters set up mode.
The LED Display will begin flashing and display the temperature setting.
Each time you press the + button, the temperature setting will increase 1 Degree.
Each time you press the
- button, the temperature setting will decrease 1 Degree.
Once you have reached the desired temperature setting, the display will continue
to flash for 5 seconds, then revert to showing the compartment temperature.
To view the real time temperature, press and hold the +/- button for 5 seconds.
The interior temperature will flash in the LED Display for 5 seconds.
If you wish to change the display from Fahrenheit to Celsius (or vice versa) press and
hold both “+” and “-” simultaneously for 5 seconds.
led lights
L1: When you turn on your unit, the internal light will switch on when the door is opened,
and off when the door is closed.
L
2: Press
L3: Press
the internal light will remain on after the door is closed.
twice, the internal light will dim 50% after 3 minutes.
Wine & Weed Systems maintain two different temperature zones from one control panel.
take control
Dual Zone Temperature Settings
Adjustable Range: 54 F
o
o
to 75 F (upper) 41
o
F to 64
o
F (lower)
When you turn your XO Unit on, it is set to work in Standard Mode.
Press and ECO Mode is turned on, ECO Mode is an energy saver function.
Press again and ECO Mode is turned off, the unit returns to Standard Mode.
Sabbath Mode was designed for use on the Jewish Sabbath and Holidays.
The Sabbath Mode feature makes it possible to use your appliance during the
duration of the holiday. The Sabbath Mode overrides typical reactions caused
by interactions with the unit. While in Sabbath Mode your appliance will operate,
however it will not respond to your actions.
To initiate Sabbath Mode: Press and hold both + for 5 seconds.
The display will show either “Sb” or “Sb On” depending on the model you have to indicate
Sabbath Mode is engaged.
To turn Sabbath Mode off and return to Standard Mode, Press and hold both +
f
Press for 5 seconds, DEMO mode is turned on.
Press for 5 seconds again, DEMO mode is turned off and your XO returns to standard
mode.
or 5 seconds again.
When you turn your XO wine & weed on, the interior lights will be
white. Press the icon and the lights will change to midnght blue.
Press the icon again and the lights will change to honey amber.
take control
continued
Your controls are simple and intuitive to operate.
ON /OFF Button
Press & Hold for 1 Second to turn ON
Press & Hold for 3 Seconds to turn OFF
Press to Silence Alarm
Light Function Button
Toggle Between 3 Light Functions
L1, L2, L3
TEMPERATURE DISPL AYS
UPPER | LOWER
Indicator Light
Cooling Mode ON
Press to raise temperature
Press to lower temperature
Changes interior light color
Toggles between different
operating modes
UPPER
LOWER
Upper compartment:The temperature sett ing can be adjusted from 55-68°F.
Lower compartment:The temperature setting can be adjusted from 50 -64°F.
dual zone control
2 zone wine & weed preservation
+
-
+
-
Cleaning the Inside:
Walls, floor, inside window, and shelves - Some water deposits and dust can be removed with a dry paper
towel, others may require a damp cloth.
Cleaning the Outside:
Outer case - It is important to keep the area clean where the door seals against the cabinet. Clean this area
with a soapy cloth. Rinse with a damp cloth and let dry.
Control Panel and Door - Wipe with a damp cloth and dry thoroughly. Do not use cleaning sprays, large
amounts of soap and water, abrasive, or sharp objects on the panel, they can damage it.
CAUTION: Some paper towels may also scratch the control panel and glass on the door.
Door Surface - Use only mild, non-abrasive detergents applied with a clean sponge or soft cloth.
Rinse well with damp cloth.
NOTE: Do not use cleaners containing ammonia or alcohol on your XO unit. Ammonia o
r alcohol can
damage the appearance of the appliance.
NOTE: Never use any commercial/abrasive cleaners or sharp objects on any part of the wine cooler.
power failure
Most power failures are corrected within a few hours and should not affect the temperature of your appliance
if you minimize the number of times the door is opened.
If the power is off for a longer period of time, you need to take the proper steps to protect your contents.
vacation
Short vacations: Leave the XO unit operating during vacations of less than three (3) weeks.
Long vacations: If the appliance will not be used for an extended period, remove all items and turn off the
appliance.
Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking
it open if necessary.
ENERGY SAVING TIP
The unit should be located in the coolest area of the room, away from heat producing appliances,
and out of direct sunlight.
moving
Remove all items and secu
rely tape down all loose items (shelves) inside your appliance
Turn the adjustable leveling legs all the way into the base to avoid damage
Tape the door shut and transport the XO unit securely in the upright position
Blanket wrap the exterior to help protect against scratches and other damage
a little tlc
goes a long way
more “q & a”
There doesn’t appear to be any power to the unit.
There are 3 easy to check common causes:
(1) Check to see if a fuse has blown or circuit breaker has tripped & replace or reset.
(2) Check to ensure the plug is fully inserted into the outlet.
(3) A power surge may have caused the unit to shut down to protect itself - Unplug the unit,
wait 5 seconds and plug it back in.
The cabinet temperature is too high.
Check these 5 things:
(1) Check the temperature setting and adjust as nee
ded.
(2) Make certain the door is completely closed and the door gasket is sealing properly.
(3) Avoid opening the door frequently and/or leaving the door open for extended periods.
(4) Did you load a large quantity of warm bottles at once? It is better to add smaller quantities
in several loads.
(5) Make certain nothing is blocking the toe kick vents (including dust behind the vents).
The alarm is beeping and “HI” is displayed on the control panel.
See the que
stion and answers above - if the door has been tightly closed and you have not
recently added a large quantity of warm bottles, it may be a mechanical issue. Unplug the unit
and call for service.
The alarm is beeping and “LO” is displayed on the control panel.
This may be a sensor malfunction. Unplug the unit and call for service.
Why does condensation form on the inside or outside of my XO unit?
It may be that the door is either opened repeatedly or not cl
osed completely. It may also be
due to an excessive ambient humidity, in which case it will clear when the humidity drops.
There is warm air coming from the bottom of my unit.
This is normal. Cooling systems must vent the heat they remove from inside the cabinet.
Why does the evaporator fan run all the time?
It continually recirculates air to ensure cabinet temperatures are consistent.
How do I adjust temperature?
Refer to Pages 7 & 10.
How do I adjust rack height?
Refer to Page 20.
When doe
s the high temperature alarm sound?
If internal temperature exceeds 70 F for more than 60 minutes.
If the door hinge is next to a wall, how much clearance do I need to open the door?
The unit should be at least 2” from the wall to allow the door to open at least 90
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
Q.
A.
°.
°
faq’s
YEAR
WARRANTY
To obtain service:
24
we’ve got your back
90 DAY LOVE IT or LEAVE IT. For 90 Days all our products are backed by our unique Love it or Leave it Guarantee.
TWO-YEAR PARTS & LABOR LIMITED WARRANTY. XO warrants to the original purchaser of every new XO refrigerated unit, the
cabinet and all parts thereof, to be free from defects in material or workmanship under normal and proper use and maintenance as
specified by XO and upon proper installation and start-up in accordance with the instruction packet supplied with each XO unit. XO’s
obligation under this warranty is limited to a period of two (2) years from the date of original purchase.
FIVE-YEAR COMPRESSOR LIMITED WARRANTY. XO warrants its compressor to be free from defects in both material and workmanship
under normal and proper use and maintenance service for a period of five (5) years from the date of original purchase. If the compressor
fails during that time period due to a defect in material or workmanship, XO will supply a replacement compressor free of charge. The
consumer will be responsible for all related transporation and labor costs. Product must be registered with XO to qualify for this warranty.
TERMS APPLICABLE TO EACH WARRANTY. Any part covered under the above warranties that is determined by XO to have been
defective within the time frame is limited to the repair or replacement, including labor charges, of defective parts or assemblies. The
labor warranty shall include standard straight time labor charges only and reasonable travel time, as determined by XO.
WARRANTY CLAIMS. All claims for labor or parts must be made directly through XO. All claims should include: model number and
serial number of cabinet, proof of purchase, and date of installation. In case of warranted compressor, the compressor model tag must
be returned to XO along with the above listed information.
WHAT IS NOT COVERED BY THIS WARRANTY. XO’s sole obligation under this warranty is limited to either repair or replacement of
parts, subject to the additional limitations below. This warranty neither assumes nor authorizes any person to assume obligations other
than those expressly covered by this warranty. Open box, factory seconds, scratch and dent, floor models and commercial applications
are excluded from these warranties. Consumer shall be responsible for labor and transportation costs where noted above.
NO CONSEQUENTIAL DAMAGES. XO is not responsible for economic loss, profit loss; or special, indirect or consequential damages,
including without limitation, losses or damages arising from food or product spoilage claims whether or not on account or refrigeration
failure.
WARRANTY IS NOT TRANSFERABLE. This warranty is not assignable and applies only in favor of the original purchaser/user at the
original installation location. Any such assignment or transfer shall void the warranties herein made and shall void all warranties,
express or implied, including any warranty or merchantability or fitness for a particular purpose.
IMPROPER USAGE. XO assumes no liability for parts or labor coverage for component failure or other damages resulting from
improper usage or installation or failure to clean and/or maintain product as set forth in the warranty packet provided with the unit.
ALTERATION OR NEGLECT. XO is not responsible for the repair or replacement of any parts that XO determines have been
subjected after the date of manufacture to alteration, neglect, abuse, misuse, accident, damage during transit or installation, fire, flood,
or act of God.
IMPROPER ELECTRICAL CONNECTIONS. XO is not responsible for the repair or replacement of failed or damaged components
resulting from electrical power failure, high or low voltage, use of extension cords, or improper grounding of the unit.
YOUR RIGHTS UNDER STATE LAW. This warranty gives you specific legal rights and you may have other rights that vary from state to
state. Some states do not allow the exclusion or limitation of consequential damages or a limitation on how long an implied warranty lasts,
so the above exclusion or limitation may not apply to you.
OUTSIDE U.S. This warranty does not apply to, and XO is not responsible for, any warranty claims made on products sold or used outside
the 48 continental United States.
25
YEAR
WARRANTY
PARTS + LABOR COMPRESSOR
Call 973-403-8900 |email [email protected] | or submit a request on our website
www.xoappliance.com
XOUBCWCMAN022019
