Miele FNS 7774 D User Manual

Operating instructions

Freezer

To avoid the risk of accidents or damage to the appliance it is essen-

tial to read these instructions before it is installed and used for the

first time.

en-GB M.-Nr. 12 491 960

Warning and Safety instructions

This refrigeration appliance complies with current safety require-

ments. Inappropriate use can, however, lead to personal injury and

material damage.

Please read the operating and installation instructions carefully be-

fore using the refrigeration appliance for the first time. They contain

important information on safety, installation, use and maintenance.

This is to protect yourself from injury, and from damaging your refri-

geration appliance.

In accordance with standard IEC60335-1, Miele expressly and

strongly advises that you read and follow all information provided

on installing the refrigeration appliance, as well as the safety notes

and warnings.

Miele cannot be held liable for injury or damage caused by non-

compliance with these instructions.

Keep these operating and installation instructions in a safe place

and pass them on to any future owner.

Correct application

 This refrigeration appliance is intended for use in the home and in

similar environments, for example

– in shops, offices and similar work settings

– by the guests in hotels, motels, bed & breakfasts and other typical

home settings.

This refrigeration appliance is not intended for outdoor use.

 It must only be used as a domestic appliance to store deep frozen

food, freeze fresh food and to make ice.

Any other usage is not supported by the manufacturer and could be

dangerous.

 This refrigeration appliance is not suitable for storing and keeping

cool medicines, blood plasma, laboratory preparations or similar sub-

stances or products that are subject to the Medical Device Directive.

Incorrect use of the refrigeration appliance for such purposes may

cause deterioration of the items stored. The refrigeration appliance is

also not suitable for use in areas where there is a risk of explosion.

Miele cannot be held liable for damage caused by improper or incor-

rect use or operation of the appliance.

Warning and Safety instructions

 The appliance can only be used by people with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge,

if they are supervised whilst using it, or have been shown how to use

it in a safe way and recognise and understand the consequences of

incorrect operation.

Safety with children

 Children under 8 years of age must be kept away from the refriger-

ation appliance unless they are constantly supervised.

 Children 8 years and older may only use the appliance unsuper-

vised if they have been shown how to use it in a safe way and recog-

nise and understand the consequences of incorrect operation.

 Children must not be allowed to clean or maintain the appliance

unsupervised.

 Please supervise children in the vicinity of the appliance and do

not let them play with it.

 Danger of suffocation! Whilst playing, children could become en-

tangled in packaging (such as plastic wrapping) or pull it over their

head and suffocate. Keep packaging material away from children.

Technical safety

 The coolant circuit has been checked for leaks. The refrigeration

appliance complies with statutory safety requirements and the ap-

propriate EU directives.

 Warning: fire hazard/flammable materials. This symbol is on the

compressor and indicates flammable materials. Do not remove this

sticker.

Warning and Safety instructions

The refrigerant inside the appliance (details on the data plate) is en-

vironmentally friendly but flammable.

The use of this refrigerant does, however, sometimes lead to a slight

increase in the noise level of the appliance. In addition to the noise of

the compressor, you might be able to hear the refrigerant flowing

around the cooling circuit. Unfortunately, this cannot be avoided, but

it does not affect the performance of the refrigeration appliance.

When transporting and installing the refrigeration appliance, ensure

that no parts of the cooling circuit are damaged. Splashes of refriger-

ant can damage the eyes and leaking refrigerant can ignite.

In the event of damage:

- Avoid naked flames or anything which creates a spark.

- Disconnect the refrigeration appliance from the mains electricity

supply.

- Ventilate the room where the refrigeration appliance is located for

several minutes.

- Contact the Miele Customer Service Department.

 The more refrigerant there is in a refrigeration appliance, the larger

the room it should be installed in. In the event of a leakage, if the ap-

pliance is in a small room, there is the danger of a combustible gas/

air mixture building up. For every 8g of refrigerant at least 1m

room space is required. The amount of refrigerant in the refrigeration

appliance is stated on the data plate inside the appliance.

 To avoid the risk of damage to the appliance, make sure that the

connection data (fuse rating, frequency and voltage) on the data plate

corresponds to the household supply.

Check that this is the case before connecting the appliance. Consult

a qualified electrician if in any doubt.

 The electrical safety of this appliance can only be guaranteed when

correctly earthed. It is essential that this standard safety requirement

is met. If in any doubt please have the electrical installation tested by

a qualified electrician.

Warning and Safety instructions

 Temporary or permanent operation on an autonomous power sup-

ply system or a power supply system that is not synchronised with

the mains power supply (e.g. island networks, back-up systems) is

possible. A prerequisite for operation is that the power supply system

complies with the specifications of EN50160 or an equivalent stand-

ard.

The function and operation of the protective measures provided in

the domestic electrical installation and in this Miele product must

also be maintained in isolated operation or in operation that is not

synchronised with the mains power supply, or these measures must

be replaced by equivalent measures in the installation. As described,

for example, in the current version of BS OHSAS 18001–2 ISO

45001.

 If the electrical connection cable supplied is damaged, it must only

be replaced by an original spare part to prevent a hazard for the user.

Miele can only guarantee the safety of the appliance when original

Miele spare parts are used. For safety reasons, such replacement

may only be carried out by a qualified specialist or the Miele Cus-

tomer Service Department.

 Do not connect the appliance to the mains electrical supply by a

multi-socket adapter or extension lead. These are a fire hazard and do

not guarantee the required safety of the appliance.

 If moisture gets into electrical components or into the mains con-

nection cable, it could cause a short circuit. Therefore, do not operate

this refrigeration appliance in areas which are exposed to moisture

(e.g in a garage or utility room).

 This appliance must not be used in a non-stationary location (e.g.

on a ship).

 Do not use a damaged appliance. It could be dangerous. Check the

appliance for visible signs of damage.

 For safety reasons, this appliance may only be used after it has

been built in.

Warning and Safety instructions

 The appliance must be disconnected from the power supply during

installation, maintenance and repair work, and during installation

work on the mains water connection. It is only completely isolated

from the power supply when:

- the mains fuses are switched off, or

- the screw-out fuse is removed (where applicable), or

- the mains cable has been unplugged. Pull on the plug and not the

cable when disconnecting it from the power supply.

 Unauthorised installation, maintenance and repairs, or a faulty

mains water connection can cause considerable danger for the user.

Installation, maintenance and repairs, installation work on the mains

water connection, and all repairs on the ice/water outlet should only

ever be carried out by a Miele-authorised technician.

 The ice-cube maker must only be connected to a cold water sup-

ply.

 Miele cannot be held liable for damage caused by a faulty mains

water connection.

 While the appliance is under warranty, repairs should only be un-

dertaken by a Miele authorised service technician. Otherwise the

warranty is invalidated.

 Faulty components must only be replaced with genuine Miele ori-

ginal spare parts. Miele can only guarantee the safety standards of

the appliance when Miele replacement parts are used.

 This refrigeration appliance is supplied with a special lamp to cope

with particular conditions (e.g. temperature, moisture, chemical res-

istance, abrasion resistance and vibration). This lamp must only be

used for the purpose for which it is intended. The lamp is not suitable

for room lighting. Replacement lamps may only be fitted by a Miele

authorised technician or by the Miele Customer Service Department.

This refrigeration appliance contains several light sources with at

least energy efficiency classG.

 In areas which may be subject to infestation by cockroaches or

other vermin, pay particular attention to keeping the appliance and its

surroundings clean at all times. Any damage caused by cockroaches

or other vermin will not be covered by the warranty.

Warning and Safety instructions

Proper installation

 When installing the refrigeration appliance, it is a mandatory re-

quirement to follow the installation instructions supplied with it.

 Always wear protective gloves when transporting and installing the

refrigeration appliance.

 Two people are required to install the refrigeration appliance.

 Change the door hinging (if necessary) as described in the installa-

tion instructions supplied with the appliance.

 Only install the refrigeration appliance in a solid, rectangular and

level housing unit, positioned on an even and level floor.

Correct use

 This refrigeration appliance is designed for use within specific am-

bient temperatures (climate range). Do not use in ambient temperat-

ures for which it is not designed. The climate range is stated on the

data plate in the interior cabinet of the refrigeration appliance. A

lower ambient temperature will cause the compressor to switch off

for longer periods, meaning that the refrigeration appliance is unable

to maintain the required temperature.

 Do not cover or block the air vents as this could impair the effi-

ciency of the appliance, increase the electricity consumption and

could cause damage to the components.

 If storing food which contains a lot of fat or oil in the appliance or

the door, make sure that it does not come into contact with plastic

components as this could cause stress cracks or break the plastic.

 Risk of fire and explosion. Do not store explosive materials in the

refrigeration appliance or any products containing propellants (e.g.

spray cans). Electrical components can cause flammable mixes of

gases to ignite.

 Danger of explosion. Do not operate any electrical equipment (e.g.

an electric ice-cream maker) inside the refrigeration appliance.

Danger of sparking and explosion.

 Danger of injury and damage to the appliance. Do not store cans or

bottles containing carbonated drinks or liquids which could freeze in

the freezer zone. Otherwise they could burst.

 Danger of injury and damage to the appliance. When cooling drinks

quickly in the freezer zone, make sure bottles are not left in for more

than one hour. Otherwise they could burst.

Warning and Safety instructions

 Danger of injury. Never handle frozen food or the metal parts of the

appliance with wet hands. Your hands may freeze to the frozen food

or to the metal.

 Danger of injury. Do not take ice cubes out with your bare hands

and never place ice cubes or ice lollies in your mouth straight from

the freezer zone. The very low temperature of the frozen food can

cause frost burn to the lips and tongue.

 Do not refreeze partially or fully defrosted food. Consume defros-

ted food as soon as possible, as it will lose its nutritional value and

spoil if left for too long. Defrosted food may only be re-frozen after it

has been cooked.

 Observe the manufacturer's “use-by” dates and storage instruc-

tions given on food to avoid the risk of food poisoning. Storage times

will depend on several factors, including the freshness and quality of

the food, as well as the temperature at which it is stored.

Accessories and spare parts

 Only use original Miele accessories. If other parts are used, war-

ranty, performance and product liability claims will be invalidated.

 Miele will guarantee to supply functional spare parts for a min-

imum of 10years and up to 15years following the discontinuation of

your refrigeration appliance.

Cleaning and care

 Do not use any oils or grease on the door seals, as these will cause

the seals to deteriorate and become porous with time.

 Do not use a steam cleaning appliance to clean or defrost this ap-

pliance.

Steam could reach electrical components and cause a short circuit.

 Sharp edged or pointed objects will damage the evaporator, caus-

ing irreversible damage to the appliance. Do not use sharp edged or

pointed objects to

- remove frost and ice,

- separate frozen food or remove ice trays.

 Do not place electric heaters or candles in the appliance to defrost

it. These can damage the plastic parts.

Warning and Safety instructions

 Do not use defrosting sprays or de-icers, as they could contain

substances which could damage the plastic parts or which might

cause the build-up of gases and pose a danger to health.

Transport

 Always transport the appliance in an upright position and in its ori-

ginal transport packaging to avoid damage in transit.

 Danger of injury and damage to the appliance. The refrigeration ap-

pliance is very heavy and must be transported by two people.

Disposal of your old appliance

 Children playing could become trapped in the appliance and could

suffocate.

- Remove the appliance doors.

- Remove the drawers.

- Leave the adjustable shelves in the refrigeration appliance so chil-

dren cannot climb inside.

- If your old refrigeration appliance has a door lock, destroy it. This

will prevent the risk of children playing accidentally locking them-

selves in and endangering their lives.

 Risk of electric shock!

- Cut the plug off the mains connection cable.

- Cut the mains connection cable off the old appliance.

Dispose of the plug and mains connection cable separately from the

old appliance.

 During and after disposal, make sure that the refrigeration appli-

ance is not placed near petrol or other flammable gases and liquids.

 Risk of fire due to escaping oil or refrigerant!

The refrigerant and oil inside the appliance are flammable. In high

enough concentrations, escaping refrigerant or oil may ignite if they

come into contact with an external heat source.

During disposal, make sure that the cooling circuit is not damaged in

order to prevent refrigerant and oil escaping in an uncontrolled man-

ner (see the data plate for details of the refrigerant).

Warning and Safety instructions

 Splashes of coolant can damage the eyes. Be careful not to dam-

age any part of the pipework whilst awaiting disposal, e.g. by

- puncturing the coolant channels in the condenser,

- bending any pipework, or

- scratching the surface coating.

Symbol on the compressor (depending on model)

This information is only relevant for recycling. There is no risk during normal opera-

tion.

 The oil in the compressor can be fatal if swallowed or if it penet-

rates the airways.

Caring for the environment

Disposing of the packaging ma-

terial

The packaging material is used for hand-

ling and protects the appliance from

transport damage. The packaging ma-

terial used is selected from materials

which are environmentally friendly for

disposal and can generally be recycled.

Recycling the packaging material re-

duces the use of raw materials. Use ma-

terial-specific collection points for valu-

able materials and take advantage of re-

turn options. Your Miele dealer will take

the packaging material away.

Disposing of your old appliance

Electrical and electronic appliances con-

tain many valuable materials. They also

contain certain materials, compounds

and components which were essential

for their correct functioning and safety.

These could be hazardous to human

health and to the environment if dis-

posed of with household waste or if

handled incorrectly. Please do not,

therefore, dispose of your old appliance

with household waste.

Take care not to damage your refrigera-

tion appliance before or during disposal

in an authorised, environmentally

friendly manner.

This is to ensure that refrigerant in the

cooling circuit and oil in the compressor

is contained, and will not leak into the

environment.

Instead, please make use of officially

designated collection and disposal

points to dispose of and recycle elec-

trical and electronic appliances in your

local community, with your dealer or

with Miele, free of charge. By law, you

are solely responsible for deleting any

personal data from the old appliance

prior to disposal. You are legally obliged

to remove any old batteries which are

not securely enclosed by the appliance

and to remove any lamps without des-

troying them, where this is possible.

These must be taken to a suitable col-

lection point where they can be handed

in free of charge. Please ensure that

your old appliance poses no risk to chil-

dren while being stored for disposal.

Installation

*INSTALLATION*

Installation site

 Risk of damage and danger of in-

jury due to the refrigeration appliance

tipping over.

This refrigeration appliance is very

heavy and can tip forwards when the

appliance door is open.

Keep the appliance door(s) closed

until the refrigeration appliance has

been built in. The refrigeration appli-

ance must be secured in its building-

in niche in accordance with the oper-

ating and installation instructions.

 Fire risk and risk of damage from

appliances which give off heat.

Appliances which give off heat can

catch fire and set fire to the refrigera-

tion appliance.

This refrigeration appliance must not

be installed underneath a hob.

 Fire risk and danger of damage

from open flames.

Open flames can set fire to the refri-

geration appliance.

Keep open flames (e.g. a candle)

away from the refrigeration appli-

ance.

This appliance should be installed in a

dry, well-ventilated room.

 Risk of damage due to high hu-

midity.

In environments with high humidity,

condensation can build up on ex-

ternal refrigeration appliance panels.

This condensate can cause corrosion

on external appliance panels.

Install the refrigeration appliance in a

dry and/or air-conditioned room with

sufficient ventilation.

After installation please make sure

that the appliance door(s) closes

(close) properly and the refrigeration

appliance is installed in accordance

with these installation instructions. It

is essential to comply with the spe-

cified ventilation cutout require-

ments.

When deciding on the installation site,

please bear in mind that your refrigera-

tion appliance will use more energy if in-

stalled near to a heater, a cooker or

other appliance that gives off heat.

Avoid direct sunlight.

The higher the ambient temperature, the

longer the compressor runs and the

higher the energy consumption is.

Installation

*INSTALLATION*

When installing the refrigeration appli-

ance, please note the following:

- The socket must be easily accessible

in an emergency, not concealed be-

hind the appliance.

- The plug and mains connection cable

must not touch the rear of the refriger-

ation appliance as they could be dam-

aged by vibrations from the appliance.

- Other appliances must also not be

plugged into a socket located directly

behind the refrigeration appliance.

- When installing the refrigeration appli-

ance, make sure that the mains con-

nection cable does not get trapped or

damaged.

- Do not position or operate multi-

socket adapters, distributor strips or

other electronic devices (e.g. halogen

transformers) at the rear of the appli-

ance.

- The floor at the installation site must

be horizontal and level and must be as

high as the surrounding floor.

Side-by-side combinations

 Risk of damage due to condensa-

tion on external appliance panels.

In environments with high humidity

and a lack of ventilation, condensa-

tion can build up on external appli-

ance panels, which can cause corro-

sion.

Do not place refrigeration appliances

directly next to or on top of one an-

other.

Your refrigeration appliance can be in-

stalled with another refrigeration appli-

ance next to it as it is equipped with in-

tegrated heaters in the side panels.

Each of the two refrigeration appliances

must be built into a separate housing

unit.

Climate range

This refrigeration appliance is designed

for use within specific ambient temper-

atures (climate range). Do not use in

ambient temperatures for which it is not

designed.

A lower ambient temperature leads to

the compressor switching off for longer

periods. This can cause the internal

temperature in the refrigeration appli-

ance to rise with the risk of food deteri-

orating and going off.

The climate range is stated on the data

plate in the interior cabinet of the refri-

geration appliance.

Climate range Ambient temper-

ature

SN 10to32°C

N 16to32°C

ST 16to38°C

T 16to43°C

SN-ST 10to38°C

SN-T 10to43°C

A freezer from the SN climate range

can operate without any difficulties in

rooms with a cooler ambient temper-

ature (down to +5°C).

Installation

*INSTALLATION*

Ventilation

 Risk of fire and damage due to in-

sufficient ventilation.

If the refrigeration appliance is not

ventilated sufficiently, the com-

pressor will run more frequently and

for longer periods. This will result in

increased energy consumption and a

higher operating temperature for the

compressor. This may, in turn, cause

damage to the compressor.

Please ensure that there is adequate

ventilation around the refrigeration

appliance.

It is essential to observe the required

ventilation gaps.

The ventilation gaps must not be

covered or blocked in any way.

They must also be regularly dusted.

Air at the back of the refrigeration appli-

ance gets warm. The appliance housing

unit must therefore be constructed to

allow sufficient space for ventilation

(see “Installation dimensions” and the

installation instructions provided).

Changing the door hinging

 Danger of injury and damage to

the appliance due to heavy door.

There is an increased risk of injury

and damage if the door hinging is in-

stalled by a single person.

Always change the door hinging with

the help of a second person.

The refrigeration appliance is supplied

with left-hand hinging. If right-hand

hinging is required, the hinges must be

changed (see accompanying installation

instructions).

Do not change the hinging if this re-

frigeration appliance is going to be in-

stalled side by side with another re-

frigeration appliance.

Furniture door panel

Horizontal and vertical gaps

Depending on the style of kitchen fur-

niture, the thickness and edge radius of

the furniture door panel and the gap that

runs around the door, vertically and hori-

zontally, are specified.

It is essential to pay attention to the

following:

- Horizontal gap

The gap between the furniture door

panel and the housing unit door above

or below it must be at least 3mm.

- Vertical gap

If the gap between the refrigeration

appliance furniture door panel and

the adjoining housing unit door or

wall on the hinged side is too small,

the appliance door could collide with

the adjoining housing unit door or

wall when opened.

It may be necessary to adjust the size

of this gap to suit the thickness and

edge radius of the appliance furniture

door.

This must be taken into consideration

when planning your kitchen and when

replacing an old refrigeration appliance

with a new one to ensure the installa-

tion conditions required are met.

Installation

*INSTALLATION*

Appliance

furniture

door

thickness

A [mm]

Gap X [mm]

for different

edge radiiB

R0 R1.2 R2 R3

≥16–19 min. 3

20 5 4 4 3.5

21 5.5 5 4.5 4

22 6.5 6 5.5 5

Adjoining kitchen furniture front

A=Furniture front thickness

B=Edge radius

X=Gap

Adjoining side wall

A=Furniture front thickness

B=Edge radius

X=Gap

Tip: Fit a spacer between the housing

unit carcase and the side wall. This way

you will get a sufficiently wide gap.

Weight of the furniture door

 If the furniture door panel is too

heavy, this can cause damage.

Fitting a furniture door panel which is

heavier than the maximum permitted

weight could damage the hinges. This

can cause subsequent functional

problems.

The maximum permissible weight of the

furniture door is:

Refrigeration appliance kg

FNS 7774 ... 26

Limiting the opening angle of

the appliance door

The door hinges are set ex works to en-

able the appliance door to be opened

wide.

If the opening angle of the appliance

door needs to be limited to approx. 90°,

the hinge can be adjusted to accom-

modate this.

The locking pins for limiting the door

opening must be fitted before the refri-

geration appliance is installed.

 Insert the locking pins supplied for

limiting the door opening into the

hinges from above.

The appliance door opening angle is

now limited to approx. 90°.

Installation

*INSTALLATION*

Building-in dimensions

Installation in a tall unit/side view

All dimensions are given in mm.

* The declared energy consumption was calculated in a 560mm deep niche. The

refrigeration appliance is fully functional in a 550mm niche but the energy con-

sumption will be slightly higher.

Before installation, ensure the housing unit dimensions are the correct size.

Installation

*INSTALLATION*

Connections and ventilation

All dimensions are given in mm.

The specified ventilation cross-sections must be adhered to in order to ensure the

correct functioning of the refrigeration appliance.

View from the front

Mains connection cable, length = 2200mm

Water connection, length = 2000mm

Ventilation cross-section min. 200 cm

Ventilation

No connection sockets in this area

Installation

*INSTALLATION*

Mains water connection

Information about the mains water

connection

 Risk of injury and appliance dam-

age if appliance is not connected

properly.

Failing to connect the appliance

properly can result in personal injury

and/or material damage.

The appliance may only be connec-

ted to the mains water connection by

suitably qualified specialists.

 Disconnect the refrigeration ap-

pliance from the power supply before

connecting it to the mains water sup-

ply.

Close the stopcock before connect-

ing the refrigeration appliance to the

mains water supply.

 Risk to health and risk of damage

due to contaminated water.

The quality of the incoming water

must conform to the requirements

for drinking water in the country

where the refrigeration appliance is

being used.

Connect the refrigeration appliance

to the drinking water supply.

This refrigeration appliance meets the

requirements of IEC61770 and

EN61770.

Connection to the water supply must

comply with the applicable regula-

tions in the country where the appli-

ance is being installed. All appliances

and systems used to supply water to

the refrigeration appliance must also

comply with the applicable regula-

tions in the respective country.

For correct functioning (dispensing rate,

size of ice cubes, noise level) the water

connection pressure needs to be

between 150kPa and 620kPa (1.5bar

and 6.2bar).

If the water connection pressure ex-

ceeds 620kPa (6.2bar), a pressure re-

ducing valve must be fitted.

The water supply line and the inlet

solenoid valve on the refrigeration appli-

ance are suitable for a water connection

pressure of up to 1000kPa (10bar).

Use fresh water to ensure that the

quality of the ice cubes remains high.

Connect the hose to the fresh water

supply and avoid connection to a wa-

ter supply in which the water might

stagnate.

Only use the hose supplied. The hose

must not be shortened, extended or

replaced by a different hose.

The hose must only be replaced by

an original Miele spare part. The

food-grade hose is available to order

from the Miele webshop, from the

Miele Customer Service Department

or from your local Miele dealer.

A stopcock must be provided between

the hose and the mains water connec-

tion to ensure that the water supply can

be cut off if necessary.

Make sure that the stopcock remains

accessible after the appliance has

been installed.

Water supply

Ensure that the connections are tight

and leak-proof.

Installation

*INSTALLATION*

 Risk of damage to the hose.

The water supply from the stopcock

to the ice cube maker has been inter-

rupted.

Do not bend or damage the hose.

A stopcock with a metric R3/4thread

must be incorporated when connect-

ing to the water supply.

The solenoid valve is located at the

back of the refrigeration appliance on

the bottom right. It also has a metric

R3/4thread.

–Connecting the hose to the refriger-

ation appliance

 Pull the cover off the thread of the

solenoid valve.

 Position the angled end of the hose

horizontally on the holder and hold

onto it securely.

 Screw the nut onto the thread by

hand until it is securely in place.

–Connecting the hose to the stop-

cock

 Connect the nut to the stop-

cock.

–Checking the mains water connec-

tion

Test the water connection for leaks be-

fore installing the appliance in the niche.

 Slowly open the stopcock and

check the screw connections.

Electrical connection

The refrigeration appliance must only be

connected to an earthed socket using

the mains connection cable supplied.

The socket must be easily accessible

after the refrigeration appliance has

been installed. If the socket is not easily

accessible, ensure that a suitable

means of disconnection is provided on

the installation side for each pole.

Installation

*INSTALLATION*

 Risk of fire from overheating.

Connecting the refrigeration appli-

ance to a multi-socket plug adapter

or to an extension lead can overload

the cable.

For safety reasons, do not use an ex-

tension lead or multi-socket adapter.

The electrical installation must comply

with VDE0100 requirements.

For safety reasons, we recommend us-

ing a type  residual current device

(RCD) in the assigned electrical installa-

tion for connecting the refrigeration ap-

pliance.

If the mains connection cable is dam-

aged, it must only be replaced with a

specific mains connection cable of the

same type (available from the Miele

Customer Service Department). For

safety reasons, such replacement may

only be carried out by a qualified spe-

cialist or the Miele Customer Service

Department.

These operating instructions and the

data plate indicate the nominal power

consumption and the appropriate fuse

rating. Compare this information with

the data of the on-site electrical con-

nection. If in any doubt, consult a quali-

fied electrician.

Temporary or permanent operation on

an autonomous power supply system or

a power supply system that is not syn-

chronised with the mains power supply

(e.g. island networks, back-up systems)

is possible. A prerequisite for operation

is that the power supply system com-

plies with the specifications of

EN50160 or an equivalent standard.

The function and operation of the pro-

tective measures provided in the do-

mestic electrical installation and in this

Miele product must also be maintained

in isolated operation or in operation that

is not synchronised with the mains

power supply, or these measures must

be replaced by equivalent measures in

the installation. As described, for ex-

ample, in the current version of VDE-

AR-E2510-2.

Connecting the refrigeration appliance

 Insert the plug connector into the

socket at the back of the refrigeration

appliance.

Make sure that the plug connector has

clicked into position correctly.

 Insert the plug of the refrigeration ap-

pliance into the socket.

The refrigeration appliance is now con-

nected to the electricity supply.

Saving energy

How to save energy:

Installation site The refrigeration appliance has to cool more often at higher am-

bient temperatures and consumes more energy in the process.

Therefore, you should:

- Install the refrigeration appliance in a well-ventilated room.

- Do not install the refrigeration appliance near to a heat source

(heater element, cooker).

- Protect the refrigeration appliance from direct sunlight.

- Ensure an ideal ambient temperature of 20°C.

- Clean the ventilation gaps on a regular basis to remove any

dust.

Temperature

setting

The colder the temperature, the higher the energy consumption.

The following settings are recommended:

- -18°C in the freezer section.

Use Energy consumption is increased by heat input and impeded air

circulation. Therefore, you should:

- Only open the appliance door(s) when necessary and for as

short a time as possible. Arrange the food in such a way that

makes it easy to find in the appliance.

- Always close the appliance door(s) properly after opening

them.

- Allow hot food and drinks to cool down before placing them in

the refrigeration appliance.

- Store food well packaged or covered.

- Do not overfill the compartments to allow air to circulate.

- Keep drawers and shelves arranged as they were when the ap-

pliance was delivered.

- When placing food in the appliance, make sure that the ventila-

tion slots are not blocked.

Guide to the appliance

















Guide to the appliance

Display

Interior lighting

NoFrost module

Tiltable freezer drawer

Freezer drawers

Ice cube maker with integrated ice cube tray and light

Ice&PizzaBox

Soft-close mechanism (SoftClose)

Guide to the appliance

Start display

The display can be scratched by pointed or sharp objects, e.g. pens.

Only touch the display with your fingertips.

It is possible that the display will not react to finger contact if your fingers are

cold.



-18

°C





Temperature display for freezer section

Settings mode 

sensor control for adjusting various settings in Settings mode

Display for Miele@home connection status

(only visible when the Miele@home function has been set up)

Demo mode display

(only visible when the Demo mode function has been switched on)

Using the appliance

 Touch the area/symbol you want on the start display.

 Swipe left or right across the display until the value/symbol you want is shown in

the middle.

 Tap on the option you want on the display to confirm.

The selected value/symbol will light up orange (except for a few exceptions).

 To leave the Settings level, tap on  or OK.

Guide to the appliance

Settings mode

In Settings mode, you can select the following appliance functions and alter their

settings to some extent:

Symbol Function Factory

default

 Switch the Party mode function on or off

(see “Selecting further settings”)

Off

 Switching the ice cube maker on and off

(see “Making ice cubes”)

Off

/ Switching the lock function on or off

(see “Selecting further settings”)

 (off)

 Switch the Sabbath mode function on or off

(see “Selecting further settings”)

Off





Call up information on the Sabbath mode function ––





Change the time before the door alarm is triggered

(see “Selecting further settings”)

1:00

 Set up the Miele@home function for the first time,

activate and deactivate WiFi

or reset the network configuration

(see “Selecting further settings”)

App





/ 



Switch the keypad tone on or off On

 /  Change the volume of the alarms and buzzers or switch

them off entirely

(see “Selecting further settings”)

/level5

 Change the display brightness

(see “Selecting further settings”)

Level4

°C / °F Change the temperature unit

(°Celsius or °Fahrenheit)

°C

 Switch the Demo mode function off

(only visible when switched on)

(see “Selecting further settings”)

Off

Guide to the appliance

 Reset to default settings

(see “Selecting further settings”)

––

 Call up information (model identifier and serial number)

about your refrigeration appliance

(see “Selecting further settings”)

––

 Setting the cleaning position of the ice cube tray

(only appears if the ice cube maker is switched on) (see

“Cleaning and care”)

––

Guide to the appliance

Adjusting the interior fittings

Ice&PizzaBox









The Ice&PizzaBox is located on a pull-

out shelf  and can only ever be pulled

out as a whole.

There is a clip-on container  in the ice

cube drawer . The clip-on container

can contain a normal amount of ice

cubes. The clip-on container can be

easily removed and reinserted for use.

If you ever need a larger quantity of ice

cubes, you can simply remove the clip-

on container.

Pizza boxes can be placed vertically in

the PizzaBox  next to it.

The pizza boxes can be conveniently re-

moved and sorted.

In addition, you have a good overview of

the stored pizzas.

You can also use the PizzaBox for stor-

ing high types of food.

 Risk of damage caused by load-

ing too much food.

Loading food which is too heavy can

damage the drawers and the pull-out

shelf.

Do not exceed the maximum load

size of the pull-out shelf of 20kg.

Tilting the top drawer

The top drawer can be tilted to make it

easier to remove frozen food.

 Pull the drawer out.

The drawer is secured with pull-out

stops and cannot fall out.

Creating a flexible design for the

freezer zone

(VarioRoom)

If you wish to freeze large items such as

a turkey or game, you can remove the

upper freezer drawers and the glass

plates between the freezer drawers.

This creates more volume and space for

storing bulky and tall items of frozen

food.

Guide to the appliance

Accessories supplied

Ice cube scoop

Optional accessories

A range of useful Miele accessories and

care products are available for your ap-

pliance.

Optional accessories can be ordered

from the Miele webshop. They can

also be ordered from the Miele Cus-

tomer Service Department (see end of

this booklet for contact details) or from

your Miele dealer.

Multi-purpose microfibre cloth

The microfibre cloth is suitable for re-

moving fingerprints and light soiling

from surfaces such as stainless steel,

glass, plastic and chrome without the

use of chemicals.

MicroCloth Kit

The MicroCloth Kit contains a universal

cloth, a glass cloth and a polishing cloth.

These cloths are extremely resistant to

tearing and very robust. Thanks to very

fine microfibres these cloths achieve an

excellent cleaning performance.

MicroCloth HyClean

The MicroCloth HyClean is a multi-pur-

pose antibacterial cloth and is particu-

larly tear resistant and durable. It can be

used wet or dry, with or without clean-

ing agent.

Switching on and off

Before using for the first time

 Remove all packaging material and

protective film.

 Clean the inside of the appliance and

the accessories (see “Cleaning and

care”).

Connecting the refrigeration appliance

 Connect the refrigeration appliance to

the electricity supply as described in

“Electrical connection”.

Miele will then appear on the appliance

display, followed by .

Switching the refrigeration ap-

pliance on

 Open the appliance door.

 Tap on the display.

The refrigeration appliance will start to

cool and the interior lighting will come

on.

When the set temperature is reached,

the 



symbol disappears, the temper-

ature display lights up constantly and

the alarm tone stops.

 If the alarm annoys you, tap



The alarm will stop.

The refrigeration appliance will gradually

reach the pre-set temperatures.

Do not place food in the freezer zone

until it has reached the preset tem-

perature (min. -18°C).

Switching off the refrigeration

appliance

 Touch the temperature display on the

display.

 Swipe right until is shown in the

middle.

 Tap.

The cooling and interior lighting are

switched off.

will appear in the display.

Please note: The refrigeration appli-

ance is not disconnected from the

power supply when it is switched off.

Switching on and off

To note when switching off for longer

periods of time

If, during a long absence, the refriger-

ation appliance is switched off but

not cleaned and the door is left shut,

there is a danger of mould building up

inside the appliance.

It is essential to clean the refrigera-

tion appliance before a long period of

absence.

If the refrigeration appliance is not going

to be used for a longer period of time,

observe the following:

 Switch the refrigeration appliance off.

 Switch off at the wall and disconnect

the plug from the socket, or discon-

nect the fuse.

 Empty the ice cube drawer.

 Risk of damage to the ice cube

maker.

If the water inlet is blocked while the

ice cube maker is still in use, the wa-

ter inlet pipe can freeze up.

Turn the ice cube maker off if the wa-

ter supply is turned off (e.g. while on

holiday).

 Close the stopcock for the water inlet.

 Clean the refrigeration appliance and

leave the door ajar to air the refrigera-

tion appliance and avoid odours build-

ing up inside.

The correct temperature

It is very important to set the correct

temperature to ensure the shelf life of

food. Reducing the temperature reduces

the growth rate of microorganisms.

Food does not spoil as quickly.

To freeze fresh food, a temperature of

-18°C is required. This will prolong the

shelf life of your food and retain its qual-

ity.

As soon as the temperature rises above

-10°C, the bacteria become active in

the food again so it cannot be kept as

long. For this reason, partially defrosted

or defrosted food must not be re-frozen.

Food may be re-frozen once it has been

cooked, as the high temperatures

achieved when cooking destroy most

bacteria.

The temperature in the refrigeration ap-

pliance will rise:

- The more often the appliance door is

opened and the longer it is kept open

- The more food is stored in it

- The warmer the food is which is being

put into it

- The higher the ambient temperature

surrounding the refrigeration appli-

ance This refrigeration appliance is de-

signed for use within specific ambient

temperatures (climate range). Do not

use in ambient temperatures for

which it is not designed.

Temperature display

In normal operation, the temperature

display shows the current maximum

freezer section temperature in the re-

frigeration appliance.

Depending on the ambient temperature

and the temperature setting, it can take

the appliance a few hours to reach the

temperature required and for this tem-

perature to then be shown as a constant

temperature in the display.

Setting the temperature

 Touch the temperature display on the

display.

 Swipe left or right until the temperat-

ure you want is shown in the middle.

 Tap on the temperature you want to

confirm.

The temperature display will then

change back to the current temperature

in the refrigeration appliance.

Possible temperature settings

- Freezer section: -15to-28°C

Using Super freeze

SuperFreeze

When switched on, the SuperFreeze

function can be used to rapidly re-

duce the temperature in the freezer

section to its lowest setting (depend-

ing on the ambient temperature). The

refrigeration appliance will work at full

power and lower the temperature. Se-

lect this function before freezing fresh

food. This helps food to freeze quickly

and retain its nutrients, vitamins, fla-

vours and appearance.

When the SuperFreeze function is

switched on, the appliance may make

more noise than usual.

SuperFreeze should be switched on

approx. 6hours before placing food in

the freezer section.

When freezing the maximum amount

of food, the SuperFreeze function

should be switched on 24hours be-

forehand.

The SuperFreeze function will

switch itself off automatically after a

maximum of 72hours. The refrigera-

tion appliance will then run at normal

power again. The quantity of fresh food

placed in the freezer will determine the

duration before it switches off.

Tip: To save energy, you can switch the

SuperFreeze function off yourself once

food and drinks are sufficiently chilled.

You do not need to switch on the Su-

perFreeze function:

- If you are placing food that is

already frozen in the freezer

- If you only freeze up to 2kg of fresh

food daily

Switching SuperFreeze on and off

 Touch the temperature display.

 Tap to switch the SuperFreeze

function on and off again.

When the SuperFreeze function is

switched on, will light up orange.

 Tap on the temperature display to

leave the Settings level.

Selecting further settings

Explanation of the different set-

tings

Only the settings that require further ex-

planation are described below.

The door alarm and other warnings are

automatically suppressed when you

are in Settings mode.

Party mode

The Party mode function is recom-

mended if you wish to freeze large

amounts of fresh food quickly and if

you need ice cubes.

Tip: Switch on the Party mode func-

tion approx. 4hours before placing

food and drinks in the appliance.

When Party mode is switched on, the

following are switched on automatically:

- The SuperFreeze function

- The ice cube maker (ice cubes will be

produced)

The Party mode function will switch

itself off automatically after approx.

24hours. However, you can switch the

Party mode function off early at any

time.

If there is a power cut, the Party mode

function  is switched off.

Switching the lock function/ on

When the lock function is switched on,

it protects the refrigeration appliance

from being switched off unintentionally

and being adjusted unintentionally by

unauthorised persons, e.g. children.

 Tap.

 Swipe left or right until is shown in

the middle.

 Tap.

When the lock function is switched on,

will light up orange.

 Close the appliance door. Only then

will the lock function be active.

Deactivating the lock function/

temporarily

If you want to adjust the temperature,

for example, you can deactivate the lock

function temporarily:

 Touch the temperature display.

 Touch for approx. 6seconds.

The display switches to the temperature

controls.

 Now select the required settings.

Closing the appliance door will reactiv-

ate the lock function.

Switching the lock function/ off

completely

 Tap.

 Touch for approx. 6seconds.

 Swipe left or right until is shown in

the middle.

 Tap.

When the lock function is switched off,

will light up.

Sabbath mode

The refrigeration appliance offers a Sab-

bath mode for the purposes of religious

observance.

If Sabbath mode is switched on, this

will be indicated on the start display.

The display switches off after

3seconds.

Selecting further settings

When Sabbath mode is switched on,

you cannot make any settings on your

refrigeration appliance.

Ensure that the appliance doors are

properly closed, as visual and audible

alarms are switched off.

The Sabbath mode function will

switch off automatically after approx.

80hours.

When Sabbath mode is switched on,

the following are deactivated:

- Interior lighting when the door is

opened

- All acoustic and visual signals

- Temperature display

- An active WiFi connection

All other functions switched on previ-

ously remain activated.

 Health risk caused by decompos-

ing food.

As power failures are not indicated

while Sabbath mode is active, food

may be exposed to increased tem-

peratures for a certain period of time.

This will reduce the storage life of the

food.

If there is a power failure during Sab-

bath mode, check the quality of the

food.

Switching Sabbath mode off

 Tap on the black display.

will appear on the display.

 Tap.

lights up orange.

 Tap on the symbol in Settings

mode.

When Sabbath mode is switched off,

the symbol will light up white.

Changing the time before the door

alarm



is triggered

You can set how quickly the door alarm

should sound after an appliance door

has been opened.

 Tap.

 Swipe left or right until



is shown

in the middle.

 Tap



 Swipe left or right until the time you

want between 30seconds and

3minutes 30seconds is shown in the

middle.

 Tap on the setting you want to con-

firm.

Miele@home

Your refrigeration appliance is

equipped with an integrated WiFi

module.

Networking is deactivated at the fact-

ory.

To use this feature, you will need:

- A WiFi network

- The Miele app

- A Miele user account You can create a

user account via the Miele app.

The Miele app will guide you as you

connect your refrigeration appliance to

your home WiFi network.

Once the refrigeration appliance is con-

nected to your WiFi network, you can

use the app to carry out the following

activities, for example:

- Call up information on the operating

status of your refrigeration appliance

Selecting further settings

- Change the settings on your refrigera-

tion appliance

Connecting your refrigeration appliance

to your WiFi network will increase en-

ergy consumption, even when the appli-

ance is switched off.

Make sure that the signal of your

WiFi network is sufficiently strong in

the place where you want to set up

your refrigeration appliance.

Availability of the WiFi connection

The WiFi connection shares a frequency

range with other appliances (including

microwave ovens and remote control

toys). This can give rise to sporadic or

even complete connection failures.

Therefore, the availability of featured

functions cannot be guaranteed.

Miele@home availability

The ability to use the Miele app de-

pends on the availability of the

Miele@home service in your country.

The Miele@home service is not avail-

able in every country.

For information about availability, please

visit www.miele.com.

Miele App

The Miele App is available to download

free of charge from the Apple App

Store

or from the Google Play Store™.

Setting up Miele@home for the first

time

 Tap.

 Swipe left or right until is shown in

the middle.

 Tap.

 Tap on the connection method you

wish to use (app or WPS).

After you have successfully logged in, 

will appear on the start display.

If a connection could not be created, 

will appear.

 In this case, start the process again.

Deactivating or activating the WiFi

connection

 Tap.

 Swipe left or right until is shown in

the middle.

 Tap.

 Tap to deactivate the WiFi connec-

tion.

will appear on the display.

 Tap to reactivate the WiFi connec-

tion.

 Tap to exit the menu level.

When the WiFi connection is active, 

will light up on the start display.

Resetting the network configuration

 Tap.

 Swipe left or right until is shown in

the middle.

 Tap.

 Swipe right until is shown in the

middle.

 Tap.

 TapOK.

Selecting further settings

All entered settings and values for

Miele@home are reset to the default

settings.

The WiFi connection has been deactiv-

ated.  will go out on the start display.

Reset the network configuration if

you are disposing of or selling your

refrigeration appliance, or if you are

putting a used refrigeration appliance

into operation. All personal data is re-

moved from the refrigeration appli-

ance. This will also ensure that a pre-

vious owner is no longer able to ac-

cess the refrigeration appliance.

Changing the volume of the alarms

and buzzers/

You can change the volume of the

alarms and buzzers (e.g. in the event of

a door alarm or a fault message). Altern-

atively, you can switch the alarms and

buzzers off if you find them annoying.

 Tap.

 Swipe left or right until is shown in

the middle.

 Tap.

 Select the volume you want by swip-

ing the segment bar to the left or

right.

 Confirm the volume you want by tap-

ping on the segment bar.

When the alarms and buzzers are

switched off, will appear.

Adjusting the display brightness

You can adjust the display brightness to

the lighting conditions in the room.

 Tap.

 Swipe left or right until is shown in

the middle.

 Tap.

 Select the brightness you want by

swiping the segment bar to the left or

right.

 Confirm the brightness you want by

tapping on the segment bar.

Switching off Demo mode

Demo mode allows the refrigeration

appliance to be presented in the show-

room without the cooling system being

switched on. This setting is not needed

for domestic use.

If Demo mode has been switched on

as a default setting, will show on the

start display.

 Tap.

 Tap.

 Swipe left or right until is shown in

the middle.

 Tap.

After Demo mode has been switched

off, the refrigeration appliance shuts

down and must be switched on again.

Resetting the settings to their default

settings

All settings made on the refrigeration

appliance will be reset to default set-

tings (for settings, see “Guide to the ap-

pliance”).

 Tap.

 Swipe left or right until is shown in

the middle.

 Tap.

will appear on the display.

 Tap OK.

The refrigeration appliance shuts down

and must be switched on again.

Selecting further settings

Information

Appliance data (model identifier and

serial number) is shown on the display.

Keep this appliance data to hand:

- For integrating the refrigeration appli-

ance into your WiFi network (see “Se-

lecting further settings –

Miele@home”) (depending on the

model).

- When reporting an appliance fault to

the Miele Customer Service Depart-

ment (see “Service”).

- When retrieving information from the

EPREL database (see “Service”).

Temperature and door alarm

 Health risk caused by decompos-

ing food.

If the temperature in the freezer re-

mains above -18°C for a long time,

the frozen food can start to defrost.

This will reduce the storage life of the

food.

Check whether the frozen food has

started to defrost. If it has, check that

the food is safe to use and if it is,

then use it as soon as possible or

cook it before freezing it again.

Temperature alarm

The refrigeration appliance has been

fitted with a temperature alarm so that

the temperature in the freezer zone

cannot rise unnoticed.

If the temperature becomes too

warm,



will light up red in the tem-

perature display.

An alarm will also sound until the cause

of the alarm is rectified or the alarm is

switched off.

The temperature the refrigeration appli-

ance is set at determines the temperat-

ure the appliance recognises as being

too warm.

The audible and visual signals may be

activated in the following situations:

- You switch on the refrigeration ap-

pliance and the temperature in a

temperature zone differs greatly

from the set temperature.

- A lot of warm room air enters the

freezer when you are rearranging or

taking out frozen food.

- You are freezing large amounts of

food at once.

- You are freezing warm food.

- There was a power cut.

- The refrigeration appliance has a

fault.

Before you switch the temperature

alarm off, you must determine the

cause and rectify it.

If the alarm annoys you, it can be turned

off early.

 Tap



The alarm message is con-

firmed:



goes out and the alarm

stops.

The start screen appears in the display:

the warmest temperature recorded in

the refrigeration appliance will flash for

about 1minute in the display. Then the

temperature display will change to the

current temperature in the refrigeration

appliance.

Temperature and door alarm

Door alarm

The refrigeration appliance is fitted

with a door alarm to avoid increased

energy consumption and food becom-

ing warm if the door is left open.

If the appliance door is left open for an

extended period,



will light up yellow

in the temperature display. An alarm will

also sound and the interior lighting will

flash.

The time before the door alarm is

triggered can be changed (see “Select-

ing further settings”).

The door alarm’s audible signal can be

switched off (see “Selecting further set-

tings”).

The alarm will stop and



will go out in

the display as soon as the door is

closed.

Switching the door alarm off early

 Tap



The alarm will stop, 



will go out and

the interior lighting will light up again

constantly.

If the appliance door is not closed, the

door alarm will sound again after

around 1minute.

Freezing and storing food

Freezing fresh food

 Health risk caused by decompos-

ing food.

If the temperature in the freezer re-

mains above -18°C for a long time,

the frozen food can start to defrost.

This will reduce the storage life of the

food.

Check whether the frozen food has

started to defrost. If it has, check that

the food is safe to use and if it is,

then use it as soon as possible or

cook it before freezing it again.

Fresh food should be frozen as quickly

as possible. This way the nutritional

value of the food, its vitamin content,

appearance and taste are not impaired.

If food is frozen quickly, the cells have

less time to lose moisture, so they

shrink significantly less. As there is not

so much moisture loss, it is easier for

the food to reabsorb it during the de-

frosting process, and very little water

collects around the defrosted food.

Maximum freezing capacity

To ensure that fresh food placed in the

freezer freezes through to the core as

quickly as possible, the maximum freez-

ing capacity must not be exceeded. The

maximum freezing capacity for freezing

within a 24-hour period is given on the

data plate: “Freezing capacity...kg/

24hrs”.

Storing frozen food

When buying frozen food to store in

your freezer, check:

- That the packaging is not damaged

- The use-by date

- That the temperature at which the

frozen food is being stored in the shop

is -18°C or colder

 Where possible, transport frozen food

in an insulated bag and then store it

quickly in the refrigeration appliance.

Home freezing

Before placing food in the freezer

 When freezing more than 2kg of fresh

food, switch on the SuperFreeze func-

tion for 6hours before placing the

food in the freezer.

 When freezing even larger amounts of

food, switch on the SuperFreeze func-

tion for 24hours before placing the

food in the freezer.

This helps the frozen food which is

already stored in the freezer to stay

frozen.

 Only freeze fresh food which is in a

good condition.

Please note that some food is not suit-

able for freezing. These include, for ex-

ample, vegetables that are usually

eaten raw, such as lettuce or radishes.

Tip: To retain colour, taste, aroma and

vitamin C, vegetables should be

blanched before they are frozen. To do

so, place vegetables portion by portion

into boiling water for 2–3minutes. Then

remove and plunge the vegetables into

ice-cold water to cool quickly. Leave the

vegetables to drain.

Packaging food for freezing

 Freeze food in portions.

Tip: Use suitable packaging to avoid

freezer burn (such as freezer contain-

ers).

Freezing and storing food

 Expel as much air as possible from

the packaging and close it tightly.

 Make a note of the contents and the

date of freezing on the packaging.

Placing frozen food in the freezer

 If the food is too heavy, this can

cause damage.

Loading food which is too heavy can

cause damage to the freezer draw-

ers/glass shelves.

Do not exceed the relevant maximum

load:

Freezer drawer = 12kg

Glass shelf = 35kg

Unfrozen food should not touch

frozen food as this will cause the

frozen food to begin to thaw.

 To prevent food sticking together

when frozen, make sure that the pack-

aging and containers are dry.

To ensure that food freezes through to

the core quickly, do not exceed the fol-

lowing packaging and container sizes:

- Fruit and vegetables: max. 1kg

- Meat: max. 2.5kg

–Freezing small amounts of food

Place the food in the upper freezer

drawers.

 Place the food flat in the bottom of

the upper freezer drawers so that it

freezes through to the core as quickly

as possible.

–VarioRoom: freezing the maximum

amount of food (see data plate)

If the ventilation slots are blocked,

the cooling performance will de-

crease and energy consumption will

increase.

When placing food in the freezer,

make sure that the ventilation slots

are not blocked.

Tip: You can expand the space available

in the freezer section. If you wish to

freeze large frozen food such as a turkey

or game, the glass shelves between the

drawers can be removed.

 Remove the upper freezer drawers.

 Place the food flat on the upper glass

shelves so that it freezes through to

the core as quickly as possible.

Once frozen:

 Switch the SuperFreeze function

off.

 Place the frozen food in the freezer

drawers and push them back in.

Freezing and storing food

Storage time for frozen food

Food group Storage time

(Months)

Ice cream 2to6

Bread, baked goods 2to6

Cheese 2to4

Fish, oily 1to2

Fish, lean 1to5

Sausage, ham 1to3

Game, pork 1to12

Poultry, beef 2to10

Vegetables, fruit 6to18

Herbs 6to10

The storage times given are guidelines only.

For standard freezing results, follow the

advice on packaging.

By keeping the freezer zone at a con-

stant temperature of -18°C and taking

appropriate hygiene measures you can

maximise the storage life of your food

and avoid food waste.

Cooling drinks quickly

When cooling drinks quickly in the

freezer, make sure bottles are not left in

for more than one hour; otherwise they

could burst, causing injury and damage.

Making ice cubes

Check and pay attention to the following

before switching the ice cube maker on:

- The ice cube maker must be clean.

- The refrigeration appliance must be

switched on.

- Ice cubes can only be made when the

ice cube drawer is completely closed.

- There is a clip-on container at the top

of the ice cube drawer. If you ever

need a larger quantity of ice cubes,

you can simply remove the clip-on

container. The ice cube maker then

automatically produces ice cubes until

the maximum fill level in the ice cube

drawer is reached.

 Risk to health due to contamin-

ated water.

Bacteria can develop in water which

has been sitting in the water supply

lines for too long. This poses a risk to

your health.

Throw away the first 3 batches of ice

cubes made after the ice cube maker

is started up, as the water will have

been used for the initial rinsing of the

water supply line.

This applies to the initial commis-

sioning as well as when using the ice

cube maker again after it has been

switched off for an extended period

of time (more than 5days).

When commissioning the appliance

for the first time, it can take up to

24hours for the first ice cubes to drop

out of the ice cube maker and collect

in the drawer.

After the ice cube maker has been

turned off and on again, this process

lasts max. 6hours.

Only make normal domestic quantities

of ice cubes with the ice cube maker.

The ice cube maker can make up to

approx. 0.8kg of ice cubes in

24hours.

The amount of ice cubes made by the

appliance depends on the temperature

in the freezer section. The lower the

temperature, the more ice cubes are

produced in a certain period of time.

Switching the ice cube

maker on and off

 Tap.

 Swipe left or right until is shown in

the middle.

 Tap.

will light up orange when the ice

cube maker is switched on.

Once the freezer section has cooled

down to its set temperature, the ice

cube maker will fill with water.

As soon as ice cubes are produced, they

will empty automatically from the integ-

rated ice cube tray and into the clip-on

container. The clip-on container can be

removed if required.

Making ice cubes

Ice cube production is halted automat-

ically when the clip-on container or the

ice cube drawer is full. The drawer will

not fill up to the top edge.

Tip: Increase the fill volume of ice cubes

by spreading the ice cubes out evenly

from time to time.

Tip: Empty the clip-on container or the

ice cube drawer at regular intervals, or if

you have not produced any ice for more

than a week. This will ensure that you al-

ways have fresh ice and the ice cubes

will not form a clump.

The ice cube maker can be turned off

independently of the freezer section if

you do not want to make any ice

cubes.

If the ice cube maker is switched off,

food can be placed in the ice cube

drawer and frozen.

 Push the ice cube drawer all the way

back in when you stop ice cube pro-

duction.

Defrosting

The appliance is equipped with a

NoFrost system. The refrigeration appli-

ance defrosts automatically.

The moisture generated in the appliance

collects on the condenser and is auto-

matically defrosted and dissipated from

time to time.

This automatic defrosting system en-

ables the refrigeration appliance to re-

main permanently ice-free. Food stored

in the freezer will not defrost with this

system.

Cleaning and care

The data plate located inside the in-

terior cabinet of the refrigeration appli-

ance must not be removed. It contains

information which is required in the

event of a fault.

Do not let water get into the elec-

tronic unit or the lighting.

 Risk of damage due to moisture

ingress.

The steam from a steam cleaner can

damage plastic and electrical com-

ponents.

Do not use a steam cleaner to clean

the refrigeration appliance.

Cleaning agents

Cleaning and conditioning agents

used in the interior cabinet of the re-

frigeration appliance must be food

safe.

To avoid damaging the surfaces of the

appliance, do not use the following:

- Cleaning agents containing soda, am-

monia, acids or chlorides

- Cleaning agents containing descaling

agents

- Abrasive cleaning agents (e.g. scour-

ing powder, scouring liquid or pumice

stones)

- Cleaning agents containing solvents

- Stainless steel cleaners

- Dishwasher cleaner

- Oven sprays

- Glass cleaning agents

- Hard, abrasive sponges and brushes

(e.g. pot scourers)

- Eraser stain remover blocks

- Sharp metal scrapers

We recommend using a clean sponge

and lukewarm water with a little wash-

ing-up liquid to clean the surfaces of the

appliance.

Preparing the refrigeration ap-

pliance for cleaning

 Switch the refrigeration appliance off.

appears in the display and the cooling

system is switched off.

 Take any food out of the refrigeration

appliance and store it in a cool place.

 Take out any removable accessories

for cleaning (see “Removing and dis-

mantling accessories for cleaning”).

Cleaning the inside of the appli-

ance

The refrigeration appliance should be

cleaned regularly (at least once a

month).

If soiling is left on for any length of

time, it may become impossible to

remove under certain circumstances.

Surfaces may suffer discolouration or

damage.

It is therefore best to remove any

soiling immediately.

 Clean the interior with a clean

sponge, lukewarm water and a little

washing-up liquid.

 After cleaning, wipe with clean water

and dry with a cloth.

 Leave the door open to air the refri-

geration appliance sufficiently for a

short while and to prevent odour

build-up.

Cleaning and care

Cleaning accessories by hand

or in the dishwasher

The following components must be

cleaned by hand only:

- All drawers

- Pull-out shelf with Ice&PizzaBox

- Telescopic runners and protective trim

(on the glass shelves)

- The clip-on container

- The ice cube scoop

The following components are dish-

washer-safe:

 Risk of damage due to high dish-

washer temperatures.

Parts of the refrigeration appliance

may become unusable, e.g. deform, if

they are washed in the dishwasher at

more than 55°C.

For dishwasher-safe components, al-

ways select dishwasher programmes

with a maximum temperature of

55°C.

Contact with natural dyes from car-

rots, tomatoes and ketchup, etc., may

discolour the plastic parts in the dish-

washer. This discolouration does not

affect the stability of the parts.

- The glass shelves

Removing and dismantling ac-

cessories for cleaning

Removing the top drawer and glass

shelf

 Pull the drawer out as far as it will go.

 Tilt the drawer slightly upwards and

remove the drawer upwards at an

angle.

 Pull out the glass plate together with

the guide rails.

 Pull the guide rails off to the side.

 After cleaning, reattach the guide rails

to the glass plate.

Replacing the top drawer

 Insert the glass plate together with

the guide rails in the freezer zone.

 Place the drawer on the guide rails

from an angle at the top and push the

drawer all the way in.

Removing the drawers and glass

shelves on telescopic runners

The magnet on the drawer is import-

ant for the proper functioning of the

ice cube maker.

Do not remove the magnet.

 Pull out the drawer as far as it will go

and then lift it up and out.

Push the telescopic rails back in

again to avoid damaging them.

 Pull the glass shelf and telescopic

runners out.

 To remove the telescopic runners:

1. Push the catch upwards.

Cleaning and care

2. Push the telescopic runner to the

side.

3. Then pull the telescopic runner off to

the rear.

 Pull off the protective trim at the front

and back of the shelf.

 After cleaning the shelf, reattach the

protective trim.

 To attach the telescopic runners to

the shelf:

1. Hook the telescopic runner on at the

rear.

2. Then clip the catches into position at

the front.

Replacing the drawer

 Insert the glass plate together with

the telescopic runners in the freezer

zone.

 Slide the drawer onto the fully retrac-

ted telescopic runners.

Removing the Ice&PizzaBox with pull-

out shelf

 Pull out the pull-out shelf completely.

 Remove the ice cube drawer with the

clip-on container and the PizzaBox by

lifting them slightly at the front.

 Empty the clip-on container, the ice

cube drawer and the PizzaBox.

 Push the pull-out shelf all the way in.

Cleaning and care

 Lift the pull-out shelf first at the front

left 1.), then at the front right 2.) so

that it comes loose from its fastening.

Now you can remove the pull-out shelf

to the front 3.).

 Remove the glass shelf 1.) and then

pull off the telescopic runners to the

side 2.).

Refitting the pull-out shelf with

Ice&PizzaBox

 Fit the telescopic runners on each

side of the glass shelf.

 Insert the glass shelf into the freezer

section.

 Insert the pull-out shelf at an angle

behind the front retainer.

 Push in the pull-out shelf at an angle.

The stop must be positioned behind

the retainer on both sides.

 Set the pull-out shelf down at the

front.

Cleaning and care

 Press the pull-out shelf down slightly

at the front so that it audibly engages.

 Pull out the pull-out shelf while sup-

porting it lightly with your hand.

 Place the ice cube drawer and the

PizzaBox on the pull-out shelf.

 Place the clip-on container in the ice

cube drawer with the raised edge at

the back.

 Push the pull-out shelf back in all the

way.

Cleaning the ice cube tray

The ice cube tray cannot be removed

and therefore has to be moved into the

cleaning position.

Clean the ice cube tray:

- Before switching off the ice cube

maker for a long period of time.

- Regularly, to remove ice and water

residues.

Selecting the cleaning position for

the ice cube tray

Before selecting the cleaning position

for the ice cube tray, check the follow-

ing:

- The ice cube maker is switched on.

- The ice cube drawer is empty and in

position.

 Tap.

 Swipe left or right until is shown in

the middle.

 Tap.

It will take some time to move the ice

cube tray into the cleaning position.

Once the ice cube tray has stopped

moving, the symbol will appear on

the display.

Cleaning and care

 To leave this Settings level, tap.

 Remove the ice cube drawer.

 Clean the ice cube tray and the ice

cube drawer with lukewarm water and

a little washing-up liquid. Wipe thor-

oughly with clean water and dry with

a cloth.

 Insert the ice cube drawer back into

the appliance.

 After cleaning, tap.

You will hear the ice cube tray return to

its original position.

Cleaning the door seal

 Risk of damage as a result of in-

correct cleaning.

If you treat the door seal with oils or

grease, it can become porous.

Do not use any oils or grease on the

door seal.

 The door seal should be cleaned regu-

larly with clean water, and then wiped

dry with a soft cloth.

Cleaning the ventilation gaps

A build-up of dust will increase the en-

ergy consumption of the appliance.

 The ventilation gaps should be

cleaned on a regular basis with a

brush or vacuum cleaner (you could

use a Miele vacuum cleaner dusting

brush, for example).

After cleaning

 Replace all shelves and accessories in

the refrigeration appliance.

 Switch the refrigeration appliance

back on, if necessary.

The refrigeration appliance will start

cooling again.

 Switch the SuperFreeze function

on for a while so that the freezer sec-

tion can cool down quickly.

 Once the freezer has reached the re-

quired temperature, place the frozen

food back in the freezer drawers and

put them back in the freezer.

 Switch the SuperFreeze function

off as soon as the temperature in the

freezer is a constant -18°C or colder.

 Close the appliance door.

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily

remedied. You can save time and money in many cases, as you do not need to call

the Miele Customer Service Department.

Information to help you rectify faults yourself can be found at www.miele.com/ser-

vice.

The following tables are designed to help you to find the cause of a malfunction or a

fault and to resolve it.

To prevent unnecessary loss of temperature it is advisable not to open the door

while waiting for the appliance to be serviced.

Problem Cause and remedy

The refrigeration appli-

ance is not getting cold

and the interior lighting

does not come on when

the appliance door is

opened.

The refrigeration appliance is not switched on and the

symbol is lit up on the display.

 Switch the refrigeration appliance on.

The plug is not inserted in the socket correctly.

 Insert the plug into the socket. If the refrigeration

appliance is switched off,  will appear on the dis-

play.

The mains fuse has tripped. There could be a fault

with the refrigeration appliance, the household elec-

trical wiring or another electrical appliance.

 Contact a qualified electrician or the Miele Cus-

tomer Service Department.

The compressor runs

continuously.

This is not a fault. To save energy, the compressor

runs at a lower speed, but for longer, when less cool-

ing is required.

The compressor is

switching on more fre-

quently and for longer

periods of time. The

temperature in the refri-

geration appliance is too

low.

The ventilation gaps have been covered or become

too dusty.

 Do not block the ventilation gaps.

 Dust the ventilation gaps regularly.

The appliance door has been opened too frequently, or

a large amount of fresh food has been placed inside or

frozen at the same time.

 Only open the appliance door when necessary and

for as short a time as possible.

After a while, the temperature will return to normal by

itself.

The appliance door is not properly closed. A thick layer

of ice may have formed in the freezer section.

Problem solving guide

Problem Cause and remedy

 Close the appliance door.

After a while, the temperature will return to normal by

itself.

If a thick layer of ice has already formed, this will af-

fect cooling and increase energy consumption.

 Defrost the refrigeration appliance and clean it.

The ambient temperature is too high. The higher the

ambient temperature, the longer the compressor runs.

 See the information in “Installation – Installation

site”.

The refrigeration appliance was not properly installed

in the niche.

 Install the refrigeration appliance in the niche as de-

scribed in the installation instructions supplied with

it.

The temperature setting in the refrigeration appliance

is too low.

 Correct the temperature setting.

A large amount of food is being frozen at once.

 See “Freezing and storing food”.

The SuperFreeze function is still switched on.

 Switch off the SuperFreeze function earlier to

save energy.

The compressor comes

on less and less often

and for shorter periods

of time. The temperature

in the refrigeration appli-

ance rises.

This is not a fault. The temperature setting is too high.

 Correct the temperature setting.

 Check the temperature again after 24hours.

The frozen food begins to defrost.

The ambient temperature is too low for this refrigera-

tion appliance.

If the ambient temperature is too low, the compressor

will run less frequently. This may cause the freezer

section to become too warm.

 See the information in “Installation – Installation

site”.

 Increase the ambient temperature.

Problem solving guide

Problem Cause and remedy

Ice or condensation has

built up inside the refri-

geration appliance. The

appliance door may not

close correctly.

The door seal has come out of its groove.

 Check that the door seal is correctly positioned in

the groove.

The door seal is damaged.

 Check whether the door seal is damaged.

The door seal is dam-

aged or needs to be re-

placed.

No tools are required to change the door seal.

 Change the door seal. A replacement is available

from Miele or from specialist retailers.

Other problems

Problem Cause and remedy

Food has frozen to-

gether.

The food packaging was not dry when placed in the

freezer.

 Use a blunt instrument, e.g. a spoon handle or

plastic scraper, to prise it apart carefully.

There is no audible alarm

even though the appli-

ance door has been

open for a long time.

This is not a fault. The alarm has been switched off in

Settings mode. If you want to switch the audible alarm

back on again:

 Tap.

 Swipe left or right until is shown in the middle.

 Tap.

 Select the volume you want by swiping the segment

bar to the right.

 Confirm the setting you want by tapping the seg-

ment bar.

When the alarms and buzzers are switched on, or-

ange will appear.

Problem solving guide

Display warnings

Message Cause and remedy

 lights up on the

start display, the

refrigeration ap-

pliance does not

get cold even

though the con-

trols and the in-

terior lighting are

working.

Demo mode has been activated.

 Tap.

 Tap.

 Swipe left or right until is shown in the middle.

 Tap.

After Demo mode has been switched off, the refri-

geration appliance shuts down and must be switched

on again.

Nothing is visible on the

display. The display is

completely blank.

Sabbath mode is switched on: the interior lighting is

switched off and the refrigeration appliance is cooling

down.

 Tap on the black display.

will appear on the display.

 Tap.

lights up orange.

 Tap the symbol again.

When Sabbath mode is switched off, the symbol

will light up white.

is lit up on the display

and the appliance can-

not be used.

The lock function has been activated.

 Unlock the refrigeration appliance temporarily or

switch the lock function off completely (see “Select-

ing further settings – Deactivating the lock func-

tion/ temporarily/switching off completely”).

Problem solving guide

Message Cause and remedy

 lights up yellow

in the display and

an alarm also

sounds.

The ice cube drawer is not in the refrigeration appli-

ance. A buzzer sounds after closing the appliance

door.

 Tap on the display.

The alarm message is confirmed and the buzzer stops.

The current temperature will appear in the display

again.

 Replace the drawer correctly in the refrigeration ap-

pliance or switch the ice cube maker off.

The mains water connection has not been installed.

 Make sure that the mains water connection has

been installed correctly.

The water supply is turned off.

 Open the stopcock.

There is a kink in the hose.

 Check the hose; if it is faulty, it must only be re-

placed by an original Miele spare part.

The water connection pressure is too low.

 Check that the water connection pressure is

between 150kPa and 620kPa (1.5bar and 6.2bar).

 lights up yellow

in the display and

a buzzer sounds.

The drawer for the ice cube maker is full.

 Remove the drawer and empty it.





will light up yellow in

the display, an alarm will

also sound and the in-

terior lighting will flash.

The door alarm has been activated.

 Tap



The alarm will stop, 



will go out and the interior

lighting will light up again constantly.

Problem solving guide

Message Cause and remedy





is lit up red in the

temperature display and

an alarm is also sound-

ing.

The temperature alarm has been activated; the tem-

perature in the freezer section has risen higher or

fallen lower than the temperature set.

Possible reasons for this include:

– The appliance door has been opened too fre-

quently.

– A large quantity of fresh food has been placed in

the freezer without the SuperFreeze function be-

ing switched on.

– A prolonged power cut (mains outage) has oc-

curred.

– The refrigeration appliance has a fault.

 Tap



The alarm message is confirmed: 



goes out and the

alarm stops.

The warmest temperature recorded in the refrigeration

appliance will flash for about 1minute in the display.

Then the temperature display will change to the cur-

rent temperature.

You can exit from the flashing temperature display

early:

 Touch the temperature display.

The warmest temperature displayed will disappear.

The display will then revert to showing the current

temperature in the freezer.

 Rectify the cause of the alarm.

 Depending on the temperature displayed, you

should check whether food in the freezer has started

to thaw or has defrosted. If it has, it should be used

as soon as possible. Defrosted food may only be re-

frozen after it has been cooked.

Problem solving guide

Message Cause and remedy



lights up red in the

display and an alarm

also sounds.

Indication of an interruption to the power supply: the

temperature in the refrigeration appliance over the last

few days or hours has risen too high because of a

power cut or interruption to the power supply.

 Tap



.

The fault message is confirmed:



 goes out and the alarm will stop.

The warmest temperature recorded in the refrigeration

appliance will flash for about 1minute in the display.

Then the temperature display will change to the cur-

rent temperature.

You can exit from the flashing temperature display

early:

 Touch the temperature display.

The warmest temperature displayed will disappear.

The display will then revert to showing the current

temperature. The refrigeration appliance will go back

to the last temperature setting when the power is

back on.

 Rectify the cause of the alarm.

 Depending on the temperature displayed, you

should check whether food in the freezer has started

to thaw or has defrosted. If it has, it should be used

as soon as possible. Defrosted food may only be re-

frozen after it has been cooked.

Problem solving guide

Message Cause and remedy

 lights up red in

the display and a

fault code F with

numbers may ap-

pear. An alarm

will also sound.

There is a fault.

 Tap on the display to switch the alarm off.

 Contact the Miele Customer Service Department.

To report the fault, you need the fault code and also

the model identifier and serial number of your refriger-

ation appliance. You can access this information on

the display.

 To do this, touch on the display.

The appliance data required will be shown on the dis-

play.

Confirm with OK to exit the information display and

the fault code will be shown again on the display.

The refrigeration appliance can be switched off dir-

ectly from the fault message display.

There is an appliance fault: this display always has

priority over any settings which have just been selec-

ted.

An appliance fault has priority over any current door

and/or temperature alarms displayed.





lights up red in the

display and an alarm

also sounds.

There is a fault with the ice cube maker.

 Tap



on the display to switch the alarm off.

 Call the Miele Customer Service Department.

The ice cube maker can also be switched off in Set-

tings mode.

Problems with the ice cube maker

Problem Cause and remedy

The ice cube maker will

not switch on.

The appliance is not connected to the power supply or

is not switched on.

 Reconnect to the mains and switch the appliance

back on.

The ice cube maker is

not producing any ice

cubes.

The refrigeration appliance or ice cube maker is not

switched on.

 Switch the refrigeration appliance and the ice cube

maker on.

The water supply is not open or has not been vented.

 Open the water supply.

Problem solving guide

Problem Cause and remedy

 Check whether the water supply has been vented.

The drawer of the ice cube maker is not closed prop-

erly.

 Push the drawer all the way in.

The appliance door has been opened too frequently,

causing the compressor to turn on more often and the

ice cube maker has iced up.

 Only open the appliance door when necessary and

for as short a time as possible.

The temperature in the freezer zone is too high.

 Select a lower temperature.

The water connection pressure is too low.

 Check that the water connection pressure is

between 150kPa and 620kPa (1.5bar and 6.2bar).

Remember that it can take up to 24hours to pro-

duce the first ice cubes.

The ice cubes taste or

smell odd.

The ice cube maker is in continuous use and should be

cleaned regularly.

 Rinse the ice cube maker and inlet pipe regularly.

The 1st three batches of ice should be thrown away

and not consumed.

The ice cube maker is rarely used. Ice cubes that are

stored for a long time can absorb the taste and smell

of other items.

 Empty the ice cube drawer if you are not going to

use the ice cube maker for a long period of time.

 Rinse the ice cube maker and inlet pipe regularly.

The 1st three batches of ice should be thrown away

and not consumed.

Unwrapped food is stored in the freezer. Ice can ab-

sorb the taste and smell of unwrapped food.

 Only store food which is packaged in the freezer

section.

The ice cube drawer is dirty.

 Clean the ice cube drawer.

Problem solving guide

Interior lighting

 Risk of electric shock due to exposed, live electrical components.

When removing the lighting cover, there is a risk of coming into contact with live

electrical components.

Do not remove the lighting cover. The LED lighting may only be repaired or re-

placed by the Miele Customer Service Department.

 Risk of injury from LED lighting.

This lighting corresponds to risk group RG2. If the cover is defective, there is a

risk of eye injury.

If the lighting cover is defective, do not look from a close range directly into the

lighting with optical instruments (e.g. magnifying glass or similar).

Problem Cause and remedy

The interior lighting is

not working.

The refrigeration appliance has not been switched on.

 Switch the refrigeration appliance on.

Sabbath mode is switched on: the display is dark

and the refrigeration appliance is cooling.

 Tap on the black display.

will appear on the display.

 Tap.

lights up orange.

 Tap on the symbol in Settings mode.

When Sabbath mode is switched off, the symbol

will light up white.

To avoid overheating, the lighting switches itself off

automatically after approx. 15minutes if the appliance

door is left open. If this is not the case, then there is a

fault.

 Call the Miele Customer Service Department.

The interior lighting is

pulsating.

This is not a fault. The door alarm has been activated.

The interior lighting pulsates along with the alarm.

Noises

The refrigeration appliance is producing various noises during operation.

If the cooling performance is low, the refrigeration appliance will conserve energy

but operate for longer. The volume will be lower.

Food will be chilled faster if the cooling performance is high.

The volume will be higher.

Normal

noises

What is causing them?

Hissing Refrigerant is being injected into the cooling circuit.

Bubbling, gurg-

ling, splashing

Refrigerant is circulating through the pipes.

Humming The refrigeration appliance is cooling.

Clicking The thermostat is switching the compressor on or off.

Humming,

whirring

The fan is running.

Automatic door opening is opening or closing the appliance door.

Cracking Materials are expanding inside the refrigeration appliance.

Rattling Valves or flaps are active.

Buzzing (refri-

geration appli-

ances with wa-

ter container)

Water is being pumped out of the water container.

Slurping (refri-

geration appli-

ances with

soft-close

mechanism)

The appliance door with soft-close mechanism is being opened

or closed.

Please bear in mind that a certain amount of noise is unavoidable (from the com-

pressor and the refrigerant circulating through the cooling circuit).

Noises

Noises Cause and remedy

Vibrating, rat-

tling, clinking

The refrigeration appliance is uneven. Use a level to check and

adjust the alignment of the refrigeration appliance. The refrigera-

tion appliance is aligned by raising or lowering the adjustable feet

(depending on the model) underneath it.

For niches of 140cm and more: place the stabilising rods sup-

plied underneath the appliance base.

Drawers, baskets or shelves are jiggling or are stuck. Check all

removable items and refit them correctly.

Bottles or containers are touching. Separate bottles or contain-

ers slightly.

The transport cable clips (depending on the model) are hanging

loose at the back of the appliance. Remove the transport cable

clips.

Service

Information to help you rectify faults

yourself and about Miele spare parts

can be found at www.miele.com/ser-

vice.

Contact in the event of a fault

In the event of any faults which you can-

not remedy yourself, please contact

your Miele dealer or the Miele Cus-

tomer Service Department.

You can book a Miele Customer Ser-

vice Department call-out online at

www.miele.com/service.

Contact information for the Miele Cus-

tomer Service Department can be

found at the end of this document.

Please quote the model identifier and

serial number of your appliance (Fabr./

SN/Nr.) when contacting the Miele

Customer Service Department. This in-

formation can be found on the data

plate.

Please note that telephone calls may be

monitored and recorded for training pur-

poses and that a call-out charge will be

applied to service visits where the prob-

lem could have been resolved as de-

scribed in this booklet.

The data plate can be found in the in-

terior cabinet of the refrigeration appli-

ance.

Displaying appliance informa-

tion

This can be found in Settings mode un-

der Information (see “Selecting fur-

ther settings”) or on the data plate in-

side the refrigeration appliance.

EPREL database

Since 1 March 2021, information on en-

ergy labelling and ecodesign require-

ments has been available in the

European Product Database (EPREL).

You can find the product database at

the following link https://

eprel.ec.europa.eu/. You will be asked to

enter the model identifier.

The model identifier can be found on the

data plate inside the refrigeration appli-

ance or, depending on the model, in

Settings mode under Information.

SN-ST

R600a:

XXXXXX

Nr. XX/ XXXXXXXXX.

XXX l

XXg

Warranty

For information on the appliance war-

ranty specific to your country please

contact Miele. See back cover for ad-

dress.

In the UK, your appliance warranty is

valid for 2 years from the date of pur-

chase. However, you must activate your

cover by calling 0330 160 6640 or re-

gistering online at www.miele.co.uk.

EU Conformity declaration

Miele hereby declares that this freezer

complies with Directive 2014/53/EU.

The complete text of the EU declaration

of conformity is available from one of

the following internet addresses:

- Products, Download from

www.miele.ie

- For service, information, operating in-

structions etc: go to https://

miele.co.uk/manuals and enter the

name of the product or the serial

number

Frequency band of

the WiFi module

2.4000GHz –

2.4835GHz

Maximum trans-

mitting power of

the WiFi module

<100mW

UK Conformity declaration

Miele hereby declares that this fridge-freezer complies with UK Radio Equipment

Regulations 2017, as amended.

The complete text of the UK declaration of conformity is available from one of the

following internet addresses:

- Products, Download from www.miele.co.uk

- For service, information, operating instructions etc: go to https://miele.co.uk/

manuals and enter the name of the product or the serial number

Frequency band of the WiFi module 2.4000GHz – 2.4835GHz

Maximum transmitting power of the

WiFi module

<100mW

ThisStatement of Compliance confirms this Miele product fully complies with the

Product Security and Telecommunications Infrastructure (Security Requirements

for Relevant Connectable Products) Regulations 2023.

1) Household Appliance –

Manufactured by: Miele & Cie KG,

Carl Miele Street 29, 33332 Gutersloh Germany

Imported by and contact point: Miele Company Ltd, Fairacres, Marcham Road,

Abingdon, Oxon, OX14 ITW Great Britain

The defined support period at the time of first supply is 10 years

To report vulnerabilities and cybersecurity issues please contact: [email protected]4)

5) Signature

Name: Paul Wright

Company Position: Head of Technical Management

Date of signature: 19th March 2024

Place of signature:

Abingdon, Oxfordshire

Freezer - 120002, 120003, 320001, 320002

Refrigerator - 110001, 110002, 310001, 310002, 310003

Fridge-freezer - 130001, 130002, 130003, 130004,

330001, 330002

Wine unit - 210007, 310004, 330004

Copyrights and licences

For the purpose of operating and controlling the communication module, Miele

uses proprietary or third-party software that is not covered by open source licens-

ing terms. This software/these software components are protected by copyright.

The copyrights held by Miele and third parties must be respected.

Furthermore, the communication module integrated in the appliance contains soft-

ware components which are distributed under open source licence conditions. The

open source components contained in the appliance along with the corresponding

formation can be accessed locally by IP via a web browser (http[s]://<IP address>/

Licenses). The liability and warranty arrangements for the open source licences dis-

played in this location only apply in relation to the respective rights holders.

United Kingdom

Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW

Tel: 0330 160 6600, Internet: www.miele.co.uk, E-mail: [email protected]

Australia

Miele Australia Pty. Ltd.

ACN 005 635 398

ABN 96 005 635 398

Level 4, 141 Camberwell Road

Hawthorn East, VIC 3123

Tel: 1300 464 353

E-mail: [email protected]

Internet: www.miele.com.au

Miele Electrical Appliances Co., Ltd.

1-3 Floor, No. 82 Shi Men Yi Road

Jing' an District

200040 Shanghai, PRC

Tel: +86 21 6157 3500

Fax: +86 21 6157 3511

E-mail: [email protected]

Internet: www.miele.cn

China Mainland

Miele (Hong Kong) Ltd.

41/F - 4101, Manhattan Place

23 Wang Tai Road

Kowloon Bay, Hong Kong

Tel: (852) 2610 1025

Fax: (852) 3579 1404

E-mail:

[email protected]

Website: www.miele.hk

Hong Kong, China

Miele India Pvt. Ltd.

1st Floor, Copia Corporate Suites,

Commercial Plot 9, Mathura Road,

Jasola, New Delhi - 110025

E-mail: customercare@miele.in

Website: www.miele.in

India

Miele Ireland Ltd.

2024 Bianconi Avenue

Citywest Business Campus

Dublin 24

Tel: (01) 461 07 10

Fax: (01) 461 07 97

E-mail: [email protected]

Internet: www.miele.ie

Ireland

Malaysia

Miele Sdn Bhd

Suite 12-2, Level 12

Menara Sapura Kencana

Petroleum

Solaris Dutamas No. 1

Jalan Dutamas 1

50480 Kuala Lumpur, Malaysia

Phone: +603-6209-0288

Fax: +603-6205-3768

Miele New Zealand Limited

IRD 98 463 631

8 College Hill

Freemans Bay, Auckland 1011

Tel: 0800 464 353

Internet: www.miele.co.nz

New Zealand

Miele Pte. Ltd.

29 Media Circle

#11-04 ALICE@Mediapolis

Singapore 138565

Tel: +65 6735 1191

Fax: +65 6735 1161

E-mail: [email protected]

Internet: www.miele.sg

Singapore

Miele (Pty) Ltd.

63 Peter Place, Bryanston 2194

Tel: (011) 875 9000

Fax: (011) 875 9035

E-mail: [email protected]

Internet: www.miele.co.za

South Africa

Miele Appliances Ltd.

Showroom 1, Eiffel 1 Building

P.O. Box 114782 - Dubai

Tel. +971 4 3044 999

Fax. +971 4 3418 852

800-MIELE (64353)

E-mail: [email protected]

Website: www.miele.ae

United Arab Emirates

Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany

Thailand

Miele Appliances Ltd.

BHIRAJ TOWER at EmQuartier

43rd Floor Unit 4301-4303

689 Sukhumvit Road

North Klongton Sub-District

Vadhana District

Bangkok 10110, Thailand

Sheikh Zayed Road, Umm Al Sheif

E-mail: customercare@miele.co.nz

P.O. Box 69434, Bryanston 2021

M.-Nr. 12 491 960 / 02en-GB

FNS 7774 ...

Miele FNS 7774 D

Product's Documents

User manual

Specifications

Miele FNS 7774 D Questions and Answers