432
5 6 7
7
8
8
1.It is recommended to turn off the shaver before removing the
cutter head assembly by lifting it up.
2.Install the new cutter head assembly by pressing it downwards
onto the body to complete the replacement.
3.The cutter head assembly has a magnetic design, allowing it
to be installed directly regardless of orientation.
Tip: The service life of the cutter head assembly depends on
the frequency and duration of use. It is recommended to
replace the cutter head assembly once a year.
Environmental protection and resource recycling
This shaver uses lithium batteries
This product is only suitable for home use
Built-in Rechargeable Battery Recycling Method
The built-in rechargeable battery in this product contains
substances that may pollute the environment. When the
appliance reaches the end of its service life, according to
the laws and regulations of your region, the internal
rechargeable battery may need to be removed for recycling
and proper disposal.
Notice:
1. Before discarding the appliance, the need to removed.
2.Be sure to disconnect the power supply before disassembling
the product and removing the battery.
3. Only remove the battery when it is completely discharged.
4. Do not connect the product to the power source after
removing the battery.
5. Batteries should be disposed safely.
How to remove the battery:
①Remove the cutter head assembly;②Use a screwdriver to
unscrew the two screws on the left and right sides of the
middle cover;③Remove the middle cover and use a screwdriver
to unscrew the four screws on the waterproof cover.;④Push the
circuit board assembly out from the USB charging hole and cut
off the battery's welded connections;
⑤Remove the battery.
PL031 Pro Shaver High Performance Zinc Alloy
Pro Shaver is ergonomically designed, and magnificently crafted
for convenience. This high-performance shaver uses the highest
quality motor. Featuring a double-ring arc shaving head, it ensures
a close, gentle and precise shaving.
Replace the cutter head assembly
TM
TM
