C400H-WE-UK-HS User manual
To ensure safe operation, please read this user manual thoroughly before use.
© Husky. Husky reserve the right to change specifications at any time without notice.
Images used are for illustration only. Stock not included.
Thank you for buying this Husky appliance. It has been designed and manufactured for many years
of trouble-free service.
Operation is very simple, but please take a few minutes to read this user manual. It contains
important safety information, and tips to ensure you receive the best possible performance from
your Husky appliance.
CONTENTS
Important notes...................................................................................................................................................................................3
Warning! Risk of electrical shock hazard .........................................................................................................................3
Disposal of old appliances ........................................................................................................................................................ 3
WEEE compliance ........................................................................................................................................................................ 3
Safety instructions and warnings .......................................................................................................................................... 3
How to minimise the energy consumption of your appliance ...........................................................................4
Before using for the first time ...............................................................................................................................................4
Troubleshooting.............................................................................................................................................................................5
C400H-WE-UK-HS
Operating instructions ............................................................................................................................................................... 6
Temperature Adjustment .........................................................................................................................................................6
Diagram .............................................................................................................................................................................................. 7
Circuit Diagram ..............................................................................................................................................................................8
Important Maintenance .............................................................................................................................................................9
Service Assistance ........................................................................................................................................................................9
How to contact Husky ................................................................................................................................................................. 12
Welcome to your new Husky
2
Important Notes
WARNING: RISK OF ELECTRICAL SHOCK HAZARD
USERS IN EUROPE: This refrigeration unit must be earthed.
If the power cable is damaged, it must be replaced by a qualified engineer to avoid shock hazard.
DO NOT ATTEMPT TO SERVICE THE ITEM YOURSELF. Ensure that the unit is properly earthed.
Stop using the chiller immediately if electric shock is felt when touching the cabinet.
DISPOSAL OF OLD APPLIANCES
BE SURE TO MAKE ANY LOCKS UNUSABLE. IF POSSIBLE, REMOVE THE
DOOR(S) AND DISCARD SEPARATELY.
WARNING – CHEMICAL HAZARD: DO NOT ALLOW CHILDREN TO PLAY
WITH OLD APPLIANCES. CONTACT YOUR LOCAL AUTHORITY FOR
PROPER DISPOSAL PROCEDURES.
Before disposing of an old appliance, please make sure it is switched off and safe. Unplug the
appliance and break any locks in order to avoid children becoming trapped.
Please note: the refrigeration system contains gases and refrigerants which require specialist waste
disposal. The valuable materials contained in a refrigerator can be recycled.
Contact your local waste disposal depot for proper disposal of an old appliance and contact your
local authority or dealer if you have any questions.
Ensure the pipework of your appliance is not damaged prior to disposal. You can contribute to
the environmental awareness by insisting on an appropriate non-polluting method of disposal.
WEEE COMPLIANCE
Husky appliances are authorised to carry the CE (Conformité
Européene) and WEEE (Waste Electrical and Electronic
Equipment Directive) symbols.
The WEEE symbol on this appliance indicates that the product
must not be disposed of with household waste. To help prevent
possible harm to health and the environment, the product must be disposed of by recycling methods
authorised as environmentally safe. For more information on how to dispose of this product
appropriately, contact your dealer or the recycling department at your local authority.
Husky appliances and their components undergo strict product testing by independent companies
to comply with all applicable local and international regulatory standards.
SAFETY INSTRUCTIONS & WARNINGS
Before switching on your Husky appliance, read the information in this user manual carefully. The
user manual contains important observa tions relating to the assembly, operation and maintenance
of the appliance.
Please keep this user manual in a safe place for future reference. If you ever sell this appliance,
hand this user manual to the new owner.
The manufacturer does not accept responsibility for any damages that may arise due to non-
observation of these instructions.
• Do not use the appliance if it is damaged. If you are in any doubt, consult an engineer.
• Connection and installation of your Husky appliance are to be carried out in strict
compliance with the relevant instructions in this user manual.
3
Technical Support: 01455 555340 (UK)
4
• Make sure there is a suitable power outlet with proper grounding to power the appliance.
• For safety, the appliance must be properly earthed in accordance with specifications.
• Always remember to unplug the appliance before cleaning. Never unplug this appliance
by pulling on the power cable. Always grip plug firmly and pull straight out from the
socket.
• All electrical repairs must be carried out by a qualified engineer. Inadequate repairs may
be dangerous.
• Do not damage any parts of the appliance which carry refrigerant by piercing, perforating,
crushing, twisting or scraping. If refrigerant comes into contact with the eyes it may cause
serious eye injury.
• Do not obstruct or cover the ventilation grille.
• Do not allow children to play with the appliance, or to sit on it or hang onto the door.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabil ities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the unit by a person
responsible for their safety.
HOW TO MINIMISE THE ENERGY CONSUMPTION OF YOUR
APPLIANCE
• Energy consumption will be lower if the appliance stands in a well ventilated space and in
particular if the vents on the appliance are clear of obstruction.
• Do not place the appliance in direct sunlight or near a heat source such as ovens,
radiators, heaters, etc as this will increase energy consumption.
• Keep the appliance door closed as much as possible.
• Setting the thermostat colder means higher energy consumption, so set only as cold as
you really require.
• Do not overfill the appliance - overfilling means the cool air cannot circulate freely inside
the appliance which may slow the process of chilling/freezing the contents and make the
appliance less efficient.
• Defrost the appliance if frost can be seen building up inside - frost will increase energy
consumption and make the chilling/freezing process slower (see section ‘Defrosting’).
• Turn the appliance off completely if it is not required for a period of days (or longer) to
avoid wasting energy.
BEFORE USING FOR THE FIRST TIME
IMPORTANT: Before switching the appliance on, we recommend you allow it to
stand upright for 8 hours. Failure to do this may result in damage to the appliance.
• To ensure correct operation, it is important that the appliance is level. Use a spirit level
to check.
• Before operation, we recommend that the appliance is cleaned for reasons of hygiene
and to remove any residue left from manufacture.
• For good circulation, vents must not be blocked. Keep a minimum of 100mm of clear
space around the appliance. Your Husky appliance should be placed on flat and firm
surface for quieter operation.
• Do not expose the appliance to direct sunlight or a heat source such as ovens, radiators,
heaters, etc.
• Do not under any circumstances place heated food or beverages in your Husky appliance.
• Do not open the door more often than necessary to lessen the escape of cold air.
• For better air circulation, do not overfill the appliance.
• Adjust the thermostat according to the amount of product and the ambient temperature.
Technical Support: 01455 555340 (UK)
5
Technical Support: 01455 555340 (UK)
Troubleshooting
Before calling Technical Support, please check the following points as you may be able to solve any
problem yourself.
Problem
The appliance does not
work properly.
The appliances internal
temperature is too high
or too low.
The appliance is noisy
in operation or makes
unusual noises.
• Note: It is normal to
hear some noises as
refrigerant flows through
the compressor.
Condensation on
appliance exterior
Inner surfaces are wet
Possible Cause
The appliance is not plugged in.
The plug and/or the power cable are
faulty.
The fuse has blown.
The appliance is faulty.
The wrong temperature is selected.
The factory default settings for the
thermostat are incorrect.
The condenser is blocked by an
accumulation of dust.
The doors are not fully closed.
The appliance is too close to a heat
source or the ambient temperature
is too high.
The ventilation grille is blocked.
The appliance is not on a level, firm
surface, or the unit may be touching
other items.
The appliance is vibrating against a
neighbouring object.
Occurs when humidity is high and
water particles in the air contact
cold surfaces.
The door may be opened too often
or kept open too long.
Action
Connect the plug to the
power supply
Call Husky (see back page) or
a qualified engineer.
Replace the fuse with one of
the same rating.
Call Husky (see back page) or
a qualified engineer.
Check the thermostat and
adjust the set temperature.
Check the thermostat and
adjust the set temperature.
Clean using a vacuum cleaner
and soft brush attachment
Check the appliance is level and
the door seals are not damaged.
Move the appliance to a more
suitable location.
Move the appliance to
improve air circulation.
Check location and position
using a spirit level.
Relocate the appliance or the
object.
Wipe away condensation with
a dry cloth.
Try to minimise opening of
the doors for better cooling
performance.
6
Technical Support: 01455 555340 (UK)
Operating Instructions
OPERATION
Place the shelves firmly on their supports. The maximum load for a shelf is 35kg. Check that the
appliance is functioning properly before installing and filling it. The thermostat is located inside
the appliance.
Note: Never put warm or hot foods/drinks into the appliance.
TEMPERATURE ADJUSTMENT
• To adjust the temperature inside the chiller compartment, adjust the temperature control
dial on the inside, top left of the chiller. Normally use the chiller with temperature MID/4.
If the cooling performance is inadequate, turn the temperature dial in the direction of
MAX/8. If it is too cold, turn the dial in the direction of MIN/1.
When you need the appliance to stop running temporally, please turn the temperature
control dial in the direction of 0/OFF.
C400H-WE-UK-HS
7
1
0
OFF
2
5
6
MAX
4
3
MIN
8
7
Technical Support: 01455 555340 (UK)
Diagram
Door handle
Light box
Shelf
Front grill
Leg
Wheel
Light box
power switch
8
Technical Support: 01455 555340 (UK)
Circuit Diagram
PLUG
O
O
C400H-WE-UK-HS
C400H-WE-UK-HS
9
Technical Support: 01455 555340 (UK)
IMPORTANT – MAINTENANCE
The condenser and the compressor compartment MUST be cleaned quarterly in
order to ensure appropriate temperature control and maintain energy efficiency.
Use a vacuum cleaner fitted with a soft brush attachment to remove dust
carefully from the condenser, the components and grilles.
The external and internal surfaces of the appliance should be cleaned regularly.
Switch the appliance off and disconnect the plug from the mains socket. Clean
the external and internal surfaces of the appliance with a mild soap solution, then
wipe dry. Do NOT use cleansers containing chlorine or other harsh cleansing
agents, as these can damage the stainless steel surfaces and components. Use
mild soapy water to clean the gasket and seals.
SERVICE ASSISTANCE
The cooling system is a hermetically sealed circuit and does not require any maintenance other
than regular cleaning (see ‘Maintenance’).
If the appliance fails to work, first check the troubleshooting guide on page 5. If you cannot locate
the reason for the failure, please contact your supplier, stating the model and serial number of the
cabinet. You may find this information on the rating plate, which is affixed on the back wall or
inside the appliance.
10
Technical Support: 01455 555340 (UK)
Notes
11
Technical Support: 01455 555340 (UK)
Notes
www.husky.co.uk
HELPLINE/TECHNICAL SUPPORT
Tel: 01455 555340 (Monday to Friday 0900 – 1700).
Email: sales@husky.co.uk
SALES
Tel: 01455 555340 (Monday to Friday 0900 – 1700).
Email: sales@husky.co.uk
OUT-OF-WARRANTY SPARES
Email: sales@husky.co.uk
29.09.23
Welcome to Husky, the home of smart refrigeration. We are a leading
global refrigeration specialist with over 25 years experience in quality
refrigeration for convenience and hospitality professionals, and we have a
great range of chillers for the home too. You’ll find Husky products all
over the world, so whatever your requirements we’re sure to have a good
looking energy-efficient model that’s perfect for you.
