Operating instructions
Refrigerator
It is essential to read the operating and installation instructions before
setup, installation, and commissioning. This prevents both personal
injury and damage to the appliance.
en-GB M.-Nr. 12 583 950
Contents
2
Warning and Safety instructions ............................................................................... 5
Caring for the environment......................................................................................... 13
Installation...................................................................................................................... 14
Installation site ...............................................................................................................
14
Side-by-side combinations ..................................................................................... 15
Climate range ............................................................................................................ 15
Ventilation.................................................................................................................. 15
Changing the door hinging ............................................................................................
16
Furniture door panel.......................................................................................................
16
Horizontal and vertical gaps.................................................................................... 16
Weight of the furniture door.................................................................................... 17
Limiting the opening angle of the appliance door......................................................
17
Building-in dimensions .................................................................................................
18
Installation in a tall unit/side view.......................................................................... 18
Connections and ventilation ................................................................................... 19
Electrical connection .....................................................................................................
20
Saving energy................................................................................................................. 21
Guide to the appliance................................................................................................. 22
Start display ....................................................................................................................
24
Using the appliance.................................................................................................. 24
Settings mode...................................................................................................... 25
Adjusting the interior fittings ........................................................................................
27
Using the door shelf fine adjustment..................................................................... 27
Repositioning the door shelf with fine adjustment.............................................. 27
Moving the door shelf/bottle shelf......................................................................... 27
Moving the adjustable shelf/adjustable shelf with lighting ................................ 28
Moving the split shelf............................................................................................... 28
Moving a split shelf .................................................................................................. 28
Space for a baking tray............................................................................................. 29
Moving the charcoal filters...................................................................................... 29
Accessories supplied.....................................................................................................
29
Clipping the egg trays on......................................................................................... 29
Adjusting or removing the bottle holder................................................................ 29
Moving the bottle rack............................................................................................. 30
Optional accessories .....................................................................................................
30
Switching on and off..................................................................................................... 32
Before using for the first time.......................................................................................
32
Connecting the refrigeration appliance ................................................................. 32
Switching the refrigeration appliance on ....................................................................
32
Switching off the refrigeration appliance ....................................................................
32
Switching off for longer periods of time ................................................................ 32
Contents
3
The correct temperature.............................................................................................. 33
Temperature display.......................................................................................................
33
Setting the temperature ................................................................................................
33
Possible temperature settings................................................................................ 33
Using Super cool and DynaCool................................................................................ 34
Selecting further settings............................................................................................ 36
Explanation of the different settings............................................................................
36
Party mode ............................................................................................................ 36
Holiday mode ...................................................................................................... 36
Switching the lock function/ on.................................................................... 36
Sabbath mode....................................................................................................... 37
Changing the time before the door alarm is triggered .................................... 37
Miele@home............................................................................................................. 38
Changing the volume of the alarms and buzzers/ ..................................... 39
Adjusting the display brightness ....................................................................... 39
Switching off Demo mode ................................................................................... 40
Resetting the settings to their default settings ............................................. 40
Information............................................................................................................. 40
Charcoal filter change indicator......................................................................... 40
Cleaning mode.................................................................................................... 40
Storing food in the fridge zone................................................................................... 42
Different storage zones .................................................................................................
42
Should food be stored loose or in packaging?...........................................................
43
Storing food in the DailyFresh drawer...................................................................... 44
Cleaning and care ......................................................................................................... 46
Defrosting........................................................................................................................
46
Cleaning agents ..............................................................................................................
46
Preparing the refrigeration appliance for cleaning.....................................................
46
Cleaning the inside of the appliance ...........................................................................
47
Cleaning accessories by hand or in the dishwasher .................................................
47
Removing and dismantling accessories for cleaning ................................................
48
Cleaning the door seal...................................................................................................
51
Cleaning the ventilation gaps .......................................................................................
51
After cleaning ..................................................................................................................
51
Troubleshooting............................................................................................................. 52
Service............................................................................................................................. 58
Contact in the event of a fault......................................................................................
58
EPREL database .............................................................................................................
58
Warranty ..........................................................................................................................
58
Contents
4
Information..................................................................................................................... 59
Declaration of conformity..............................................................................................
59
UK Conformity declaration ...........................................................................................
59
Copyrights and licences ................................................................................................
60
Warning and Safety instructions
5
This refrigeration appliance complies with current safety
requirements. Inappropriate use can, however, lead to personal
injury and material damage.
Please read the operating and installation instructions carefully
before using the refrigeration appliance for the first time. They
contain important information on installation, safety, use and
maintenance. This is to protect yourself from injury, and from
damaging your refrigeration appliance.
In accordance with standard IEC60335-1, Miele expressly and
strongly advises that you read and follow all information provided
on installing the refrigeration appliance, as well as the warning and
safety notes.
Miele cannot be held liable for injury or damage caused by non-
compliance with these instructions.
Keep these operating and installation instructions in a safe place
and pass them on to any future owner.
Correct application
This refrigeration appliance is intended for use in the home and in
similar environments, for example
– in shops, offices and similar work settings
– by the guests in hotels, motels, bed & breakfasts and other typical
home settings.
This refrigeration appliance is not intended for outdoor use.
The refrigeration appliance is intended for domestic use only for
cooling and storing food and drink.
The refrigeration appliance is not suitable for freezing food.
Any other usage is not permitted.
This refrigeration appliance is not suitable for storing and keeping
cool medicines, blood plasma, laboratory preparations or similar
substances or products that are subject to the Medical Device
Directive. Incorrect use of the refrigeration appliance for such
purposes may cause deterioration of the items stored. The
refrigeration appliance is also not suitable for use in areas where
there is a risk of explosion.
Miele cannot be held liable for damage caused by improper or
incorrect use or operation of the appliance.
Warning and Safety instructions
6
The appliance can only be used by people with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge,
if they are supervised whilst using it, or have been shown how to use
it in a safe way and recognise and understand the consequences of
incorrect operation.
Safety with children
Children under 8 years of age must be kept away from the
refrigeration appliance unless they are constantly supervised.
Children 8 years and older may only use the appliance
unsupervised if they have been shown how to use it in a safe way and
recognise and understand the consequences of incorrect operation.
Children must not be allowed to clean or maintain the appliance
unsupervised.
Please supervise children in the vicinity of the appliance and do
not let them play with it.
Danger of suffocation! Whilst playing, children could become
entangled in packaging (such as plastic wrapping) or pull it over their
head and suffocate. Keep packaging material away from children.
Technical safety
The coolant circuit has been checked for leaks. The refrigeration
appliance complies with statutory safety requirements and the
appropriate EU directives.
If the cooling circuit is damaged, refrigerant and oil can escape and ignite.
Warning: fire hazard/flammable materials. This symbol is on the
compressor and indicates flammable materials. Do not remove this
sticker.
Warning and Safety instructions
7
The refrigerant inside the appliance (details on the data plate) is
environmentally friendly but flammable.
The use of this refrigerant does, however, sometimes lead to a slight
increase in the noise level of the appliance. In addition to the noise of
the compressor, you might be able to hear the refrigerant flowing
around the cooling circuit. Unfortunately, this cannot be avoided, but
it does not affect the performance of the refrigeration appliance.
When transporting and installing the refrigeration appliance, ensure
that no parts of the cooling circuit are damaged. Splashes of
refrigerant can damage the eyes and leaking refrigerant can ignite.
In the event of damage:
- Avoid naked flames or anything which creates a spark.
- Disconnect the refrigeration appliance from the mains electricity
supply.
- Ventilate the room where the refrigeration appliance is located for
several minutes.
- Contact the Miele Customer Service Department.
The more refrigerant there is in a refrigeration appliance, the larger
the room it should be installed in. In the event of a leakage, if the
appliance is in a small room, there is the danger of a combustible
gas/air mixture building up. For every 8g of refrigerant at least 1m
3
of
room space is required. The amount of refrigerant in the refrigeration
appliance is stated on the data plate inside the appliance.
To avoid the risk of damage to the appliance, make sure that the
connection data (fuse rating, frequency and voltage) on the data plate
corresponds to the household supply.
Check that this is the case before connecting the appliance. Consult
a qualified electrician if in any doubt.
The electrical safety of this appliance can only be guaranteed when
correctly earthed. It is essential that this standard safety requirement
is met. If in any doubt please have the electrical installation tested by
a qualified electrician.
Warning and Safety instructions
8
Temporary or permanent operation on an autonomous power
supply system or a power supply system that is not synchronised
with the mains power supply (e.g. island networks, back-up systems)
is possible. A prerequisite for operation is that the power supply
system complies with the specifications of EN50160 or an
equivalent standard.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronised with the mains power supply, or these measures must
be replaced by equivalent measures in the installation. As described,
for example, in the current version of BS OHSAS 18001–2 ISO
45001.
If the electrical connection cable supplied is damaged, it must only
be replaced by an original spare part to prevent a hazard for the user.
Miele can only guarantee the safety of the appliance when original
Miele spare parts are used. For safety reasons, such replacement
may only be carried out by a qualified specialist or the Miele
Customer Service Department.
Do not connect the appliance to the mains electrical supply by a
multi-socket adapter or extension lead. These are a fire hazard and do
not guarantee the required safety of the appliance.
If moisture gets into electrical components or into the mains
connection cable, it could cause a short circuit. Therefore, do not
operate this refrigeration appliance in areas which are exposed to
moisture (e.g in a garage or utility room).
This appliance must not be used in a non-stationary location (e.g.
on a ship).
Do not use a damaged appliance. It could be dangerous. Check the
appliance for visible signs of damage.
For safety reasons, this appliance may only be used after it has
been built in.
The appliance must be isolated from the electricity supply during
installation, maintenance and repair work.
Unauthorised installation, maintenance and repairs can cause
considerable danger for the user.
Installation, maintenance and repairs must only be carried out by a
Miele authorised technician.
Warning and Safety instructions
9
While the appliance is under warranty, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.
Faulty components must only be replaced with genuine Miele
original spare parts. Miele can only guarantee the safety standards of
the appliance when Miele replacement parts are used.
This refrigeration appliance is supplied with a special lamp to cope
with particular conditions (e.g. temperature, moisture, chemical
resistance, abrasion resistance and vibration). This lamp must only be
used for the purpose for which it is intended. The lamp is not suitable
for room lighting. Replacement lamps may only be fitted by a Miele
authorised technician or by the Miele Customer Service Department.
This refrigeration appliance contains several light sources with at
least energy efficiency classF.
Proper installation
When installing the refrigeration appliance, it is a mandatory
requirement to follow the installation instructions supplied with it.
Always wear protective gloves when transporting and installing the
refrigeration appliance.
Two people are required to install the refrigeration appliance.
Change the door hinging (if necessary) as described in the
installation instructions supplied with the appliance.
Only install the refrigeration appliance in a solid, rectangular and
level housing unit, positioned on an even and level floor.
Correct use
This refrigeration appliance is designed for use within specific
ambient temperatures (climate range). Do not use in ambient
temperatures for which it is not designed. The climate range is stated
on the data plate in the interior cabinet of the refrigeration appliance.
A lower ambient temperature will cause the compressor to switch off
for longer periods, meaning that the refrigeration appliance is unable
to maintain the required temperature.
Do not cover or block the air vents as this could impair the
efficiency of the appliance, increase the electricity consumption and
could cause damage to the components.
Warning and Safety instructions
10
If storing food which contains a lot of fat or oil in the appliance or
the door, make sure that it does not come into contact with plastic
components as this could cause stress cracks or break the plastic.
Risk of fire and explosion. Do not store explosive materials in the
refrigeration appliance or any products containing propellants (e.g.
spray cans). Electrical components can cause flammable mixes of
gases to ignite.
Danger of explosion. Do not operate any electrical equipment (e.g.
an electric ice-cream maker) inside the refrigeration appliance.
Danger of sparking and explosion.
Observe the manufacturer's “use-by” dates and storage
instructions given on food to avoid the risk of food poisoning. Storage
times will depend on several factors, including the freshness and
quality of the food, as well as the temperature at which it is stored.
Accessories and spare parts
Only use original Miele accessories. If other parts are used,
warranty, performance and product liability claims will be invalidated.
Miele will guarantee to supply functional spare parts for a
minimum of 10years and up to 15years following the discontinuation
of your refrigeration appliance.
Cleaning and care
Do not use any oils or grease on the door seals, as these will cause
the seals to deteriorate and become porous with time.
Do not use a steam cleaning appliance to clean or defrost this
appliance.
Steam could reach electrical components and cause a short circuit.
Sharp edged or pointed objects will damage the evaporator,
causing irreversible damage to the appliance. Do not use sharp edged
or pointed objects to
- remove frost and ice,
- separate frozen food or remove ice trays.
Do not place electric heaters or candles in the appliance to defrost
it. These can damage the plastic parts.
Do not use defrosting sprays or de-icers, as they could contain
substances which could damage the plastic parts or which might
cause the build-up of gases and pose a danger to health.
Warning and Safety instructions
11
Transport
Always transport the appliance in an upright position and in its
original transport packaging to avoid damage in transit.
Danger of injury and damage to the appliance. The refrigeration
appliance is very heavy and must be transported by two people.
Disposal of your old appliance
Children playing could become trapped in the appliance and could
suffocate.
- Remove the appliance doors.
- Remove the drawers.
- Leave the adjustable shelves in the refrigeration appliance so
children cannot climb inside.
- If your old refrigeration appliance has a door lock, destroy it. This
will prevent the risk of children playing accidentally locking
themselves in and endangering their lives.
Risk of electric shock!
- Cut the plug off the mains connection cable.
- Cut the mains connection cable off the old appliance.
Dispose of the plug and mains connection cable separately from the
old appliance.
During and after disposal, make sure that the refrigeration
appliance is not placed near petrol or other flammable gases and
liquids.
Risk of fire due to escaping oil or refrigerant!
The refrigerant and oil inside the appliance are flammable. In high
enough concentrations, escaping refrigerant or oil may ignite if they
come into contact with an external heat source.
During disposal, make sure that the cooling circuit is not damaged in
order to prevent refrigerant and oil escaping in an uncontrolled
manner (see the data plate for details of the refrigerant).
Splashes of coolant can damage the eyes. Be careful not to
damage any part of the pipework whilst awaiting disposal, e.g. by
- puncturing the coolant channels in the condenser,
- bending any pipework, or
- scratching the surface coating.
Warning and Safety instructions
12
Symbol on the compressor (depending on model)
This information is only relevant for recycling. There is no risk during normal
operation.
The oil in the compressor can be fatal if swallowed or if it
penetrates the airways.
Caring for the environment
13
Disposing of the packaging
material
The packaging material is used for
handling and protects the appliance
from transport damage. The packaging
material used is selected from materials
which are environmentally friendly for
disposal and can generally be recycled.
Recycling the packaging material
reduces the use of raw materials. Use
material-specific collection points for
valuable materials and take advantage
of return options. Your Miele dealer will
take the packaging material away.
Disposing of your old appliance
Electrical and electronic appliances
contain many valuable materials. They
also contain certain materials,
compounds and components which
were essential for their correct
functioning and safety. These could be
hazardous to human health and to the
environment if disposed of with
household waste or if handled
incorrectly. Please do not, therefore,
dispose of your old appliance with
household waste.
Take care not to damage your
refrigeration appliance before or during
disposal in an authorised,
environmentally friendly manner.
This is to ensure that refrigerant in the
cooling circuit and oil in the compressor
is contained, and will not leak into the
environment.
Instead, please make use of officially
designated collection and disposal
points to dispose of and recycle
electrical and electronic appliances in
your local community, with your dealer
or with Miele, free of charge. By law, you
are solely responsible for deleting any
personal data from the old appliance
prior to disposal. You are legally obliged
to remove any old batteries which are
not securely enclosed by the appliance
and to remove any lamps without
destroying them, where this is possible.
These must be taken to a suitable
collection point where they can be
handed in free of charge. Please ensure
that your old appliance poses no risk to
children while being stored for disposal.
Installation
*INSTALLATION*
14
Installation site
Risk of damage and danger of
injury due to the refrigeration
appliance tipping over.
This refrigeration appliance is very
heavy and can tip forwards when the
appliance door is open.
Keep the appliance door(s) closed
until the refrigeration appliance has
been built in. The refrigeration
appliance must be secured in its
building-in niche in accordance with
the operating and installation
instructions.
Fire risk and risk of damage from
appliances which give off heat.
Appliances which give off heat can
catch fire and set fire to the
refrigeration appliance.
This refrigeration appliance must not
be installed underneath a hob.
Fire risk and danger of damage
from open flames.
Open flames can set fire to the
refrigeration appliance.
Keep open flames (e.g. a candle)
away from the refrigeration
appliance.
This appliance should be installed in a
dry, well-ventilated room.
Risk of damage due to high
humidity.
In environments with high humidity,
condensation can build up on
external refrigeration appliance
panels.
This condensate can cause corrosion
on external appliance panels.
Install the refrigeration appliance in a
dry and/or air-conditioned room with
sufficient ventilation.
After installation please make sure
that the appliance door(s) closes
(close) properly and the refrigeration
appliance is installed in accordance
with these installation instructions. It
is essential to comply with the
specified ventilation cutout
requirements.
When deciding on the installation site,
please bear in mind that your
refrigeration appliance will use more
energy if installed near to a heater, a
cooker or another appliance that gives
off heat. Avoid direct sunlight.
The higher the ambient temperature, the
longer the compressor runs and the
higher the energy consumption is.
When installing the refrigeration
appliance, please note the following:
- The socket must be easily accessible
in an emergency, not concealed
behind the appliance.
- The mains plug and mains connection
cable must not touch the rear of the
refrigeration appliance as they could
be damaged by vibrations from the
appliance.
Installation
*INSTALLATION*
15
- Other appliances must also not be
plugged into a socket located directly
behind the refrigeration appliance.
- When installing the refrigeration
appliance, make sure that the mains
connection cable does not get
trapped or damaged.
- Do not position or operate multi-
socket adapters, distributor strips or
other electronic devices (e.g. halogen
transformers) at the rear of the
appliance.
- The floor at the installation site must
be horizontal and level and must be as
high as the surrounding floor.
Side-by-side combinations
Risk of damage due to
condensation on external appliance
panels.
In environments with high humidity,
condensation can build up on
external appliance panels, which can
cause corrosion.
Do not place different refrigeration
appliance models directly next to or
on top of one other.
Exception: your refrigeration appliance
can be installed next to another
refrigeration appliance with an
integrated heating unit if each appliance
is built into a separate niche. Please
contact your dealer for specific
information about which combinations
will work with your refrigeration
appliance.
Climate range
This refrigeration appliance is designed
for use within specific ambient
temperatures (climate range). Do not
use in ambient temperatures for which
it is not designed. The climate range is
stated on the data plate in the interior
cabinet of the refrigeration appliance.
Climate range Ambient
temperature
SN 10to32°C
N 16to32°C
ST 16to38°C
T 16to43°C
SN-ST 10to38°C
SN-T 10to43°C
A lower ambient temperature leads to
the compressor switching off for longer
periods. This can cause the internal
temperature in the refrigeration
appliance to rise with the risk of food
deteriorating and going off.
Ventilation
Risk of fire and damage due to
insufficient ventilation.
If the refrigeration appliance is not
ventilated sufficiently, the
compressor will run more frequently
and for longer periods. This will result
in increased energy consumption and
a higher operating temperature for
the compressor. This may, in turn,
cause damage to the compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
It is essential to observe the required
ventilation gaps.
The ventilation gaps must not be
covered or blocked in any way.
They must also be regularly dusted.
Installation
*INSTALLATION*
16
Air at the back of the refrigeration
appliance gets warm. The appliance
housing unit must therefore be
constructed to allow sufficient space for
ventilation (see “Installation
dimensions” and the installation
instructions provided).
Changing the door hinging
Danger of injury and damage to
the appliance due to heavy door.
There is an increased risk of injury
and damage if the door hinging is
installed by a single person.
Always change the door hinging with
the help of a second person.
The refrigeration appliance is supplied
with hinges on the right. If left-hand
hinging is required, the hinges must be
changed (see accompanying installation
instructions).
Furniture door panel
Horizontal and vertical gaps
Depending on the style of kitchen
furniture, the thickness and edge radius
of the furniture door panel and the gap
that runs around the door, vertically and
horizontally, are specified.
It is essential to pay attention to the
following:
- Horizontal gap
The gap between the furniture door
panel and the housing unit door above
or below it must be at least 3mm.
- Vertical gap
If the gap between the refrigeration
appliance furniture door panel and
the adjoining housing unit door or
wall on the hinged side is too small,
the appliance door could collide with
the adjoining housing unit door or
wall when opened.
It may be necessary to adjust the size
of this gap to suit the thickness and
edge radius of the appliance furniture
door.
This must be taken into consideration
when planning your kitchen and when
replacing an old refrigeration appliance
with a new one to ensure the
installation conditions required are met.
Installation
*INSTALLATION*
17
Appliance
furniture
door
thickness
A [mm]
Gap X [mm]
for different
edge radiiB
R0 R1.2 R2 R3
≥16–19 min. 3
20 5 4 4 3.5
21 5.5 5 4.5 4
22 6.5 6 5.5 5
Adjoining kitchen furniture front
A=Furniture front thickness
B=Edge radius
X=Gap
Adjoining side wall
A=Furniture front thickness
B=Edge radius
X=Gap
Tip: Fit a spacer between the housing
unit carcase and the side wall. This way
you will get a sufficiently wide gap.
Weight of the furniture door
If the furniture door panel is too
heavy, this can cause damage.
Fitting a furniture door panel which is
heavier than the maximum permitted
weight could damage the hinges. This
can cause subsequent functional
problems.
The maximum permissible weight of the
furniture door is:
Refrigeration appliance kg
K 7767 ... 26
Limiting the opening angle of
the appliance door
The door hinges are set ex works to
enable the appliance door to be opened
wide.
If the opening angle of the appliance
door needs to be limited to approx. 90°,
the hinge can be adjusted to
accommodate this.
The locking pins for limiting the door
opening must be fitted before the
refrigeration appliance is installed.
Insert the locking pins supplied for
limiting the door opening into the
hinges from above.
The appliance door opening angle is
now limited to approx. 90°.
Installation
*INSTALLATION*
18
Building-in dimensions
Installation in a tall unit/side view
All dimensions are given in mm.
* The declared energy consumption was calculated in a 560mm deep niche. The
refrigeration appliance is fully functional in a 550mm niche but the energy
consumption will be slightly higher.
Before installation, ensure the housing unit dimensions are the correct size.
Niche height
A
K 7767 ... 1772–1788
Installation
*INSTALLATION*
19
Connections and ventilation
All dimensions are given in mm.
The specified ventilation cross-sections must be adhered to in order to ensure the
correct functioning of the refrigeration appliance.
a
View from the front
b
Mains connection cable, length = 2200mm
c
Ventilation cross-section min. 200 cm
2
d
Ventilation
e
No connection sockets in this area
Installation
*INSTALLATION*
20
Electrical connection
The refrigeration appliance must only be
connected to an earthed socket using
the mains connection cable supplied.
The socket must be easily accessible
after the refrigeration appliance has
been installed. If the socket is not easily
accessible, ensure that a suitable
means of disconnection is provided on
the installation side for each pole.
Risk of fire from overheating.
Connecting the refrigeration
appliance to a multi-socket plug
adapter or to an extension lead can
overload the cable.
For safety reasons, do not use an
extension lead or multi-socket
adapter.
The electrical installation must comply
with VDE0100 requirements.
For safety reasons, we recommend
using a type residual current device
(RCD) in the assigned electrical
installation for connecting the
refrigeration appliance.
If the mains connection cable is
damaged, it must only be replaced with
a specific mains connection cable of the
same type (available from the Miele
Customer Service Department). For
safety reasons, such replacement may
only be carried out by a qualified
specialist or the Miele Customer
Service Department.
These operating instructions and the
data plate indicate the nominal power
consumption and the appropriate fuse
rating. Compare this information with
the data of the on-site electrical
connection. If in any doubt, consult a
qualified electrician.
Temporary or permanent operation on
an autonomous power supply system or
a power supply system that is not
synchronised with the mains power
supply (e.g. island networks, back-up
systems) is possible. A prerequisite for
operation is that the power supply
system complies with the specifications
of EN50160 or an equivalent standard.
The function and operation of the
protective measures provided in the
domestic electrical installation and in
this Miele product must also be
maintained in isolated operation or in
operation that is not synchronised with
the mains power supply, or these
measures must be replaced by
equivalent measures in the installation.
As described, for example, in the current
version of VDE-AR-E2510-2.
Connecting the refrigeration appliance
Insert the plug connector into the
socket at the back of the refrigeration
appliance.
Make sure that the plug connector has
clicked into position correctly.
Insert the plug of the refrigeration
appliance into the socket.
The refrigeration appliance is now
connected to the electricity supply.
Saving energy
21
How to save energy:
Installation site The refrigeration appliance has to cool more often at higher
ambient temperatures and consumes more energy in the
process. Therefore, you should:
- Install the refrigeration appliance in a well-ventilated room.
- Do not install the refrigeration appliance near to a heat source
(heater element, cooker).
- Protect the refrigeration appliance from direct sunlight.
- Ensure an ideal ambient temperature of 20°C.
- Clean the ventilation gaps on a regular basis to remove any
dust.
Temperature
setting
The colder the temperature, the higher the energy consumption.
The following settings are recommended:
- 4 to 5°C in the refrigerator section.
Use Energy consumption is increased by heat input and impeded air
circulation. Therefore, you should:
- Only open the appliance door(s) when necessary and for as
short a time as possible. Arrange the food in such a way that
makes it easy to find in the appliance.
- Always close the appliance door(s) properly after opening
them.
- Allow hot food and drinks to cool down before placing them in
the refrigeration appliance.
- Store food well packaged or covered.
- Do not overfill the compartments to allow air to circulate.
- Place frozen food in the fridge zone to defrost.
- Keep drawers and shelves arranged as they were when the
appliance was delivered.
Guide to the appliance
22
Guide to the appliance
23
a
Display
b
Fan with lighting
c
Split shelf (FlexiBoard)
d
Egg tray
e
Door shelf with fine adjustment
f
Adjustable shelf with lighting (FlexiLight 2.0)
g
Bottle shelf with bottle holder
h
Flexible bottle rack
i
Space for a baking tray (ComfortSize)
j
Compartment cover for setting the humidity level
in the upper DailyFresh drawer
k
DailyFresh drawer for vegetables (with moisture adjustment)
l
Condensate channel and drain hole
m
DailyFresh drawer for fruit
n
Soft-close mechanism (SoftClose)
Guide to the appliance
24
Start display
The display can be scratched by pointed or sharp objects, e.g. pens.
Only touch the display with your fingertips.
It is possible that the display will not react to finger contact if your fingers are
cold.
5
°C
1
2
3
4
a
Temperature display for fridge zone
b
Settings mode
sensor control for adjusting various settings in Settings mode
c
Display for Miele@home connection status
(only visible when the Miele@home function has been set up)
d
Demo mode display
(only visible when the Demo mode function has been switched on)
Using the appliance
Touch the area/symbol you want on the start display.
Swipe left or right across the display until the value/symbol you want is shown in
the middle.
Tap on the option you want on the display to confirm.
The selected value/symbol will light up orange (except for a few exceptions).
To leave the Settings level, tap on or OK.
Guide to the appliance
25
Settings mode
In Settings mode, you can select the following appliance functions and alter their
settings to some extent:
Symbol Function Factory
default
Switch the Party mode function on or off
(see “Selecting further settings”)
Off
Switch the Holiday mode function on or off
(see “Selecting further settings”)
Off
/ Switching the lock function on or off
(see “Selecting further settings”)
(off)
Switching off the refrigeration appliance ––
Switch the Sabbath mode function on or off
(see “Selecting further settings”)
Off
Call up the Sabbath mode version ––
Change the time before the door alarm is triggered(see
“Selecting further settings”)
1:00
Set up the Miele@home function for the first time,
activate and deactivate WiFi
or reset the network configuration
(see “Selecting further settings”)
App
/
Switch the keypad tone on or off On
/ Change the volume of the alarms and buzzers or switch
them off entirely
(see “Selecting further settings”)
On
/level5
Change the display brightness
(see “Selecting further settings”)
Level4
°C / °F Change the temperature unit
(°Celsius or °Fahrenheit)
°C
Guide to the appliance
26
Switch the Demo mode function off
(only visible when switched on)
(see “Selecting further settings”)
Off
Reset to default settings
(see “Selecting further settings”)
––
Call up information (model identifier and serial number)
about your refrigeration appliance
(see “Selecting further settings”)
––
Switch on the reminder to change the
charcoal filter (see “Optional accessories”)
(see “Selecting further settings”)
Off
Switch Cleaning mode on or off
(see “Cleaning and care”)
Off
Guide to the appliance
27
Adjusting the interior fittings
Using the door shelf fine adjustment
Use the fine adjustment if you need
greater height clearance on the door
shelf/bottle shelf.
You can change the height of the door
shelf while it is loaded.
Hold the door shelf in both hands,
press the grey buttons on both sides
under it and move it.
Repositioning the door shelf with fine
adjustment
Only move the door/bottle shelves in
the appliance door when they are
empty.
Take hold of the sides of the door
shelf with both hands so that you are
touching each of the grey buttons
underneath it.
Press the grey buttons at the same
time and slide the door shelf up and
off the guide rails.
Remove the guide rail from the lugs
and move it to the desired position.
Move the second guide rail parallel to
the first rail.
Push the shelf down onto the guide
rails.
Moving the door shelf/bottle shelf
Only move the door/bottle shelves in
the appliance door when they are
empty.
Push the door/bottle shelves
upwards, then remove them by pulling
them forwards.
Replace the door/bottle shelves at
the required height.
Guide to the appliance
28
Moving the adjustable shelf/
adjustable shelf with lighting
The shelves can be adjusted according
to the height of the food.
Raise the shelf slightly at the front
and pull it forwards a little.
Lift it until the notches at the side are
in line with the shelf supports. The
shelf can then be raised or lowered to
the required level.
Push the shelf in.
Make sure that the shelf with lighting
clicks into position.
Stoppers prevent the shelves from
being dislodged by mistake.
The raised edge on the protective strip
at the back must face upwards to
prevent food from touching the back of
the appliance and freezing to it.
Moving the split shelf
To accommodate tall items such as
bottles or large containers, the front
section of the split shelf slides
underneath the rear section.
Lift up the front section of the glass
shelf slightly at the front and slide it
carefully underneath the rear section.
Moving a split shelf
The split shelf can be moved to a
different location inside the appliance.
Take both sections of the glass shelf
out of the appliance.
Attach the two adapters to the
support ribs on the left and right at
the desired height.
The section of the glass shelf with the
raised edge must be fitted at the back.
Guide to the appliance
29
Space for a baking tray
A baking tray can be placed above the
drawers. The baking tray can be no more
than 466mm wide, 386mm deep and
50mm high.
Open the appliance door as far as it
will go.
Place the baking tray on the dividing
plate.
Tip: Let the baking tray cool down to
room temperature before putting it in
the refrigerator section.
Moving the charcoal filters
KKF-FF charcoal filters with holder
(Active AirClean) are available as
optional accessories (see “Optional
accessories”).
When storing very strong smelling
food (e.g. very ripe cheese):
- Place the holder with the charcoal
filters on the shelf where this food is
kept.
- Change the charcoal filters sooner if
necessary.
- Use more charcoal filters (with
holders) in the refrigeration appliance.
The holder for the charcoal filters sits on
the protective strip at the back of the
shelf.
To move the charcoal filter, pull the
holder upwards to remove it from the
protective strip.
Refit the holder on the protective strip
of the shelf you wish to use it on.
Accessories supplied
Clipping the egg trays on
Clip the egg trays onto the rear edge
of the door shelf.
Adjusting or removing the bottle
holder
The non-slip fins of the bottle holder
make bottles more secure when you
open and close the appliance door.
The bottle holder can be moved to the
left or right to create more room for
drink cartons.
The bottle holder can be removed
completely, e.g. for cleaning:
pull the bottle holder up to remove it.
Guide to the appliance
30
Moving the bottle rack
The bottle rack can be placed at
different positions in the refrigeration
appliance.
Raise the bottle rack slightly at the
front, and pull it forwards a little until
the notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The rear rail must face upwards to
prevent bottles from touching the back
of the appliance.
Stoppers prevent the bottle rack from
being dislodged by mistake.
Optional accessories
A range of useful Miele accessories and
care products are available for your
appliance.
Optional accessories can be ordered
from the Miele webshop. They can
also be ordered from the Miele
Customer Service Department (see
end of this booklet for contact details)
or from your Miele dealer.
Multi-purpose microfibre cloth
The microfibre cloth is suitable for
removing fingerprints and light soiling
from surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.
MicroCloth Kit
The MicroCloth Kit contains a universal
cloth, a glass cloth and a polishing cloth.
These cloths are extremely resistant to
tearing and very robust. Thanks to very
fine microfibres these cloths achieve an
excellent cleaning performance.
MicroCloth HyClean
The MicroCloth HyClean is a multi-
purpose antibacterial cloth and is
particularly tear resistant and durable. It
can be used wet or dry, with or without
cleaning agent.
KKF-FS charcoal filter with holder
(Active AirClean)
Charcoal filters neutralise unpleasant
odours in the refrigerator section for
improved air quality.
KKF-RF replacement charcoal filters
(ActiveAirClean)
Replacement filters to the fit the holder
are available. We recommend replacing
the charcoal filters every 6months.
Bottle rack
For a description, see “Guide to the
appliance – Adjusting the interior
fittings”.
Adjustable shelf with pivotable glass
shelf (FlexiTray)
The pivotable glass shelf can be turned
180° clockwise, improving access to the
food placed at the back.
Guide to the appliance
31
Organisation box
The organisation box makes it easier to
sort the food in the fridge zone drawer
in a clear manner.
Depending on the model, you may
need to remove the entire drawer to
insert and remove the organisation
box.
Switching on and off
32
Before using for the first time
Remove all packaging material and
protective film.
Clean the inside of the appliance and
the accessories (see “Cleaning and
care”).
Connecting the refrigeration appliance
Connect the refrigeration appliance to
the electricity supply as described in
“Electrical connection”.
Miele will then appear on the appliance
display, followed by .
Switching the refrigeration
appliance on
Open the appliance door.
Tap on the display.
The refrigeration appliance will start to
cool and the interior lighting will come
on when the appliance door is opened.
The refrigeration appliance will adjust to
the preset temperature.
To enable the temperature to get
sufficiently cold inside the
refrigeration appliance, allow the
appliance to run for a few hours
before placing food in it. Do not place
food in the refrigeration appliance
until it has reached the preset
temperature.
Switching off the refrigeration
appliance
Touch the temperature display on the
display.
Swipe right until is shown in the
middle.
Tap.
The cooling and interior lighting are
switched off.
will appear in the display.
Please note: The refrigeration
appliance is not disconnected from
the power supply when it is switched
off.
Switching off for longer periods of
time
If, during a long absence, the
refrigeration appliance is switched off
but not cleaned and the door is left
shut, there is a danger of mould
building up inside the appliance.
It is essential to clean the
refrigeration appliance before a long
period of absence.
If the refrigeration appliance is not going
to be used for a longer period of time,
observe the following:
Switch the refrigeration appliance off.
Switch off at the wall and disconnect
the plug from the socket, or
disconnect the fuse.
Clean the refrigeration appliance and
leave the door ajar to air the appliance
and avoid odours building up inside.
The correct temperature
33
It is very important to set the correct
temperature to ensure the shelf life of
food. Reducing the temperature reduces
the growth rate of microorganisms.
Food does not spoil as quickly.
The temperature in the refrigeration
appliance will rise:
- The more often the appliance door is
opened and the longer it is kept open
- The more food that is stored in it
- The warmer the food is which is being
put into it
- The higher the ambient temperature
surrounding the refrigeration
appliance. This refrigeration appliance
is designed for use within specific
ambient temperatures (climate range).
Do not use in ambient temperatures
for which it is not designed.
...in the refrigerator section
We recommend a temperature of 4°C
in the refrigerator section.
Temperature display
In normal operation, the temperature
display shows the current average
refrigerator section temperature
inside the refrigeration appliance.
Depending on the ambient temperature
and the temperature setting, it can take
the appliance a few hours to reach the
temperature required and for this
temperature to then be shown as a
constant temperature on the display.
Setting the temperature
Touch the temperature display on the
display.
Swipe left or right until the
temperature you want is shown in the
middle.
Tap on the temperature you want to
confirm.
The temperature display will then
change back to the current temperature
in the refrigeration appliance.
Possible temperature settings
- Refrigerator section: 2to9°C
Using Super cool and DynaCool
34
SuperCool
When switched on, the SuperCool
function can be used to rapidly
reduce the temperature in the fridge
zone to its lowest setting (depending
on the ambient temperature). The
refrigeration appliance will work at full
power and lower the temperature.
Select this function for the rapid
chilling of large amounts of fresh food
or drink.
When the SuperCool function is
switched on, the appliance may make
more noise than usual.
The SuperCool function should be
switched on 4hours before placing
food or drinks in the fridge zone.
The SuperCool function will switch
itself off automatically after approx.
12hours. The refrigeration appliance
will then run at normal power again.
Tip: To save energy, you can switch the
SuperCool function off yourself once
food and drinks are sufficiently chilled.
Switching SuperCool on and off
Touch the temperature display for the
fridge zone.
Touch to switch the SuperCool
function on and off again.
When the SuperCool function is
switched on, will light up orange.
Tap on the temperature display to
leave the Settings level.
Using Super cool and DynaCool
35
DynaCool
When the DynaCool function is not
switched on, the natural circulation of
air in the appliance will cause different
temperature zones in the fridge zone,
as the cold, heavy air will sink to the
lowest section of the appliance. You
should bear this in mind when placing
food in the appliance (see “Storing
food in the refrigerator section”).
However, if you are storing a large
amount of similar food in the
refrigerator at any one time, e.g. after
your weekly shop, it is a good idea to
turn on DynaCool. This way you can
distribute the temperature on all the
adjustable shelves inside the appliance
more evenly so that all the food in the
fridge zone will be chilled to about the
same degree.
The temperature is set as normal with
the temperature control.
Also switch on the DynaCool function
when:
- The ambient temperature is high
(above approx. 35°C)
- The humidity levels are high (e.g. in
the summer)
The fan will always switch on
automatically when the compressor
switches on.
Tip: As the energy consumption
increases when DynaCool is
switched on, you should turn the
DynaCool function off again under
normal conditions.
To save energy, the fan switches off
automatically whilst the door is open.
Switching DynaCool on and off
Touch the temperature display for the
fridge zone.
Touch to switch the DynaCool
function on and off again.
When the DynaCool function is
switched on, will light up orange.
Tap on the temperature display to
leave the Settings level.
Selecting further settings
36
Explanation of the different
settings
Only the settings that require further
explanation are described below.
The door alarm and other warnings are
automatically suppressed when you
are in Settings mode.
Party mode
The Party mode function is
particularly recommended for the rapid
chilling of large amounts of fresh food
or drink.
Tip: Switch on the Party mode
function approx. 4hours before
placing food and drinks in the appliance.
When Party mode is switched on, the
DynaCool and SuperCool
functions are switched on automatically.
Party mode cannot be switched on if
Holiday mode is switched on.
The Party mode function will switch
itself off automatically after approx.
24hours. However, you can switch the
Party mode function off early at any
time.
Holiday mode
The Holiday mode function is
useful when you go on holiday, for
example, if you do not wish to switch
off the fridge zone completely or do
not need a high degree of cooling.
If Holiday mode is switched on, this
will be indicated on the start display. It
can be switched off via the start display
or Settings mode.
The fridge zone is regulated to a
temperature of 15°C, remaining in
operation whilst also saving energy.
Food which does not go off quickly can
be stored in the refrigeration appliance
for some time at this moderate
refrigerator temperature. Energy
consumption is lower than in normal
operation.
This also prevents the build-up of
odours and mould, which can occur if
the fridge zone is switched off and the
appliance door is closed.
Health risk caused by
decomposing food.
The usability and quality of food in
the fridge zone may deteriorate if the
temperature remains above 4°C for
an extended period.
Only ever switch on the Holiday
mode function for a limited
period.
Do not store any temperature-
sensitive food which goes off easily,
such as fruit, vegetables, fish, meat
and dairy products, during this time.
Switching the lock function/ on
When the lock function is switched on,
it protects the refrigeration appliance
from being switched off unintentionally
and being adjusted unintentionally by
unauthorised persons, e.g. children.
Tap.
Swipe left or right until is shown in
the middle.
Tap.
When the lock function is switched on,
will light up orange.
Close the appliance door. Only then
will the lock function be active.
Selecting further settings
37
Deactivating the lock function/
temporarily
If you want to adjust the temperature,
for example, you can deactivate the lock
function temporarily:
Touch the temperature display.
Touch for approx. 6seconds.
The display switches to the temperature
controls.
Now select the required settings.
Closing the appliance door will
reactivate the lock function.
Switching the lock function/ off
completely
Tap.
Touch for approx. 6seconds.
Swipe left or right until is shown in
the middle.
Tap.
When the lock function is switched off,
will light up.
Sabbath mode
The refrigeration appliance offers a
Sabbath mode for the purposes of
religious observance.
If Sabbath mode is switched on, this
will be indicated on the start display.
The display switches off after
3seconds.
When Sabbath mode is switched on,
you cannot make any settings on your
refrigeration appliance.
Ensure that the appliance door is
properly closed, as visual and audible
alarms are switched off.
The Sabbath mode function will
switch off automatically after approx.
80hours.
When Sabbath mode is switched on,
the following are deactivated:
- Interior lighting when the door is
opened
- All visual and audible signals
- The temperature display
- An active WiFi connection
All other functions switched on
previously remain activated.
Health risk caused by
decomposing food.
As power failures are not indicated
while Sabbath mode is active, food
may be exposed to increased
temperatures for a certain period of
time. This will reduce the storage life
of the food.
If there is a power failure during
Sabbath mode, check the quality of
the food.
Switching Sabbath mode off
Tap on the black display.
will appear in the display.
Tap .
will light up orange.
Tap the symbol again.
When Sabbath mode is switched off,
the symbol will light up white.
Changing the time before the door
alarm
is triggered
You can set how quickly the door alarm
should sound after an appliance door
has been opened.
Selecting further settings
38
Tap.
Swipe left or right until
is shown
in the middle.
Tap
.
Swipe left or right until the time you
want between 30seconds and
3minutes 30seconds is shown in the
middle.
Tap on the setting you want to
confirm.
Miele@home
Your refrigeration appliance is
equipped with an integrated WiFi
module.
Networking is deactivated at the
factory.
To use this feature, you will need:
- A WiFi network
- The Miele app
- A Miele user account You can create a
user account via the Miele app.
The Miele app will guide you as you
connect your refrigeration appliance to
your home WiFi network.
Once the refrigeration appliance is
connected to your WiFi network, you
can use the app to carry out the
following activities, for example:
- Call up information on the operating
status of your refrigeration appliance
- Change the settings on your
refrigeration appliance
Connecting your refrigeration appliance
to your WiFi network will increase
energy consumption, even when the
appliance is switched off.
Make sure that the signal of your
WiFi network is sufficiently strong in
the place where you want to set up
your refrigeration appliance.
Availability of the WiFi connection
The WiFi connection shares a frequency
range with other appliances (including
microwave ovens and remote control
toys). This can give rise to sporadic or
even complete connection failures.
Therefore, the availability of featured
functions cannot be guaranteed.
Miele@home availability
The ability to use the Miele app
depends on the availability of the
Miele@home service in your country.
The Miele@home service is not
available in every country.
For information about availability, please
visit www.miele.com.
Miele App
The Miele App is available to download
free of charge from the Apple App
Store
®
or from the Google Play Store™.
Setting up Miele@home for the first
time
Tap.
Swipe left or right until is shown in
the middle.
Tap.
Tap on the connection method you
wish to use (app or WPS).
Selecting further settings
39
After you have successfully logged in,
will appear on the start display.
If a connection could not be created,
will appear.
In this case, start the process again.
Deactivating or activating the WiFi
connection
Tap.
Swipe left or right until is shown in
the middle.
Tap.
Tap to deactivate the WiFi
connection.
will appear on the display.
Tap to reactivate the WiFi
connection.
Tap to exit the menu level.
When the WiFi connection is active,
will light up on the start display.
Resetting the network configuration
Tap.
Swipe left or right until is shown in
the middle.
Tap.
Swipe right until is shown in the
middle.
Tap.
TapOK.
All entered settings and values for
Miele@home are reset to the default
settings.
The WiFi connection has been
deactivated. will go out on the start
display.
Reset the network configuration if
you are disposing of or selling your
refrigeration appliance, or if you are
putting a used refrigeration appliance
into operation. All personal data is
removed from the refrigeration
appliance. This will also ensure that a
previous owner is no longer able to
access the refrigeration appliance.
Changing the volume of the alarms
and buzzers/
You can change the volume of the
alarms and buzzers (e.g. in the event of
a door alarm or a fault message).
Alternatively, you can switch the alarms
and buzzers off if you find them
annoying.
Tap.
Swipe left or right until is shown in
the middle.
Tap.
Select the volume you want by
swiping the segment bar to the left or
right.
Confirm the volume you want by
tapping on the segment bar.
When the alarms and buzzers are
switched off, will appear.
Adjusting the display brightness
You can adjust the display brightness to
the lighting conditions in the room.
Tap.
Swipe left or right until is shown in
the middle.
Tap.
Select the brightness you want by
swiping the segment bar to the left or
right.
Selecting further settings
40
Confirm the brightness you want by
tapping on the segment bar.
Switching off Demo mode
Demo mode allows the refrigeration
appliance to be presented in the
showroom without the cooling system
being switched on. This setting is not
needed for domestic use.
If Demo mode has been switched on
as a default setting, will show on the
start display.
Tap.
Tap.
Swipe left or right until is shown in
the middle.
Tap.
After Demo mode has been switched
off, the refrigeration appliance shuts
down and must be switched on again.
Resetting the settings to their default
settings
All settings made on the refrigeration
appliance will be reset to default
settings (for settings, see “Guide to the
appliance”).
Tap.
Swipe left or right until is shown in
the middle.
Tap.
will appear on the display.
Tap OK.
The refrigeration appliance shuts down
and must be switched on again.
Information
Appliance data (model identifier and
serial number) is shown on the display.
Keep this appliance data to hand:
- For integrating the refrigeration
appliance into your WiFi network (see
“Selecting further settings –
Miele@home”) (depending on the
model).
- When reporting an appliance fault to
the Miele Customer Service
Department (see “Service”).
- When retrieving information from the
EPREL database (see “Service”).
Charcoal filter change indicator
After inserting the charcoal filter
(optional accessory), you must activate
the charcoal filter change indicator in
Settings mode.
The charcoal filter change indicator
on the start display will remind you to
replace the charcoal filter approx.
every 6months (see “Cleaning and
care – Replacing the charcoal filters”).
Cleaning mode
Cleaning mode makes it easier to
clean the fridge zone (see “Cleaning
and care”). The interior lighting
remains switched on, even though the
fridge zone is switched off. The buzzer
will stop and the symbols on the
display will also go out.
If Cleaning mode is switched on,
this will be indicated on the start
display.
After cleaning, Cleaning mode must
be switched off. If the appliance door is
closed for more than 10minutes,
Cleaning mode switches itself off
automatically.
Door alarm
41
The refrigeration appliance is fitted
with a door alarm to avoid increased
energy consumption and food
becoming warm if the door is left
open.
If the appliance door is left open for an
extended period,
will light up yellow
in the temperature display. An alarm will
also sound and the interior lighting will
flash.
The time before the door alarm is
triggered can be changed (see
“Selecting further settings”).
The door alarm’s audible signal can be
switched off (see “Selecting further
settings”).
The alarm will stop and
will go out in
the display as soon as the door is
closed.
Switching the door alarm off early
Tap
.
The alarm will stop,
will go out and
the interior lighting will light up again
constantly.
If the appliance door is not closed, the
door alarm will sound again after
around 1minute.
Storing food in the fridge zone
42
Risk of explosion due to
flammable mixes of gases.
Electrical components can cause
flammable mixes of gases to ignite.
Do not store explosive materials in
the refrigeration appliance or any
products containing propellants (e.g.
spray cans). The spray cans in
question can be identified by the
contents printed on the can or by a
flame symbol. Electrical components
can cause escaping gases to ignite.
Risk of damage due to greasy or
oily foods.
If storing food which contains a lot of
fat or oil in the refrigeration appliance
or the appliance door, make sure that
it does not come into contact with
plastic components as this could
cause stress cracks or break the
plastic.
Make sure that no fat or oil leaks onto
the plastic parts of the refrigeration
appliance.
If there is insufficient air circulation,
the cooling performance will
decrease and energy consumption
will increase.
To allow air to circulate efficiently, do
not pack food too closely together in
the appliance.
Do not cover the fan in the rear wall
of the appliance.
Different storage zones
Due to natural air circulation, there are
different temperature regions in the
refrigerator section.
Cold, heavy air sinks to the lowest
section of the refrigeration section.
Make use of the different zones when
placing food in the appliance.
This is a refrigeration appliance with
dynamic cooling. When the fan is
running, the cold is evenly distributed
in the fridge zone. The difference
between the various temperature
zones is less pronounced.
Warmest area
The warmest area in the refrigerator
section is at the top in the front area
and in the door. Use this for storing
butter and cheese.
Coldest area
The coldest area in the fridge zone is
directly above the DailyFresh drawer
and at the back of the appliance.
A temperature setting of 4°C
combined with appropriate hygiene
measures delays the propagation of
bacteria, e.g. salmonella and listeria,
which can lead to serious food
poisoning.
Therefore, you should use these areas to
store all delicate and highly perishable
food, including:
- Fish, meat, poultry
- Cold cuts, ready meals
- Dishes or baked goods containing
eggs or cream
- Fresh dough, cake mixtures, pizza or
quiche dough
- Raw milk cheese and other raw milk
products
- Hummus, vegetable spreads, plant-
based cream cheese substitutes
- Pre-packed vegetables
Storing food in the fridge zone
43
- Other fresh food (with a label stating it
should be kept at a temperature of
approx. 4°C)
Tip: Store food in such a way that it
does not touch the rear wall of the
fridge zone. Otherwise it could freeze to
the rear wall.
Should food be stored loose or
in packaging?
Ensure that food stored in the fridge
zone is in packaging or covered properly
(some exceptions apply in the
DailyFresh drawer).
This will prevent food odours from
affecting other food, stop food from
drying out and also prevent any cross-
contamination of germs. This is
particularly important when storing
meat products. Make sure that food
such as raw meat and fish in particular
does not come into contact with other
food.
By ensuring that the temperature
settings are correct and by taking
appropriate hygiene measures, you
can prolong the storage life of your
food considerably. This prevents food
waste.
Protein-rich food
Please note that food rich in protein
deteriorates faster than other types of
food. Shellfish, for example, deteriorates
faster than fish, and fish deteriorates
faster than meat.
Storing food in the DailyFresh drawer
44
The DailyFresh drawers provide good
storage conditions for fruit and
vegetables.
The humidity level in the upper
DailyFresh drawer can also be regulated
to suit the food being stored. Food
retains its own moisture if stored at a
higher humidity and so does not dry out
as quickly. The temperature is
approximately equivalent to the
temperature in the fridge zone.
Remember that the fresher the food
when placed in the appliance, the
longer it will stay fresh.
Changing the humidity level in the
DailyFresh drawer for vegetables
The moisture level greatly depends on
the type and quantity of food being
stored, if stored unwrapped.
If the quantity of food being stored in
this compartment is small, the
humidity level may be too low.
Tip: If you are only storing a small
amount of food, wrap it in airtight
packaging.
Selecting low humidity
By default, the humidity is increased
and the compartment cover pushed
backwards .
Only change this default setting if the
humidity level in the upper DailyFresh
drawer is too high:
Pull the compartment cover forwards
as far as it will go.
The compartment cover is open and the
humidity drops .
Selecting increased humidity
Slide the compartment cover
backwards as far as it will go.
The compartment cover is closed and
the humidity remains in the
compartment .
Storing food in the DailyFresh drawer
45
Observe the following tips if you find that food you have stored does not keep
well (e.g. food becomes limp or wilts after only being stored for a short time):
Only place fresh food in the appliance. The initial condition of the food is crucial
to maintaining freshness.
Clean the DailyFresh drawer before storing food in it.
Very wet food should be dried off before storing it.
Do not store food which is sensitive to cold in the DailyFresh drawer (see
“Storing food in the fridge zone – Food which is not suitable for storage in the
fridge zone”).
Set the compartment cover to the correct position for the food being stored
(humidity not increased or humidity increased ).
An increased humidity level in the humidity-controlled compartment is
achieved with the moisture present in the food being stored if it is stored
unwrapped. The more food stored in the compartment, the higher the humidity.
If too much moisture collects in the compartment at the setting and the food
is affected, dry the floor and place a rack or similar item in the compartment so
that excess moisture can drip down. Alternatively, reduce the humidity by
pulling the compartment cover forwards.
If the humidity level is too low despite the setting, wrap the food in airtight
packaging.
Cleaning and care
46
The data plate located inside the
interior cabinet of the refrigeration
appliance must not be removed. It
contains information which is required
in the event of a fault.
Do not let water get into the
electronic unit or the lighting.
Risk of damage due to moisture
ingress.
The steam from a steam cleaner can
damage plastic and electrical
components.
Do not use a steam cleaner to clean
the refrigeration appliance.
Cleaning water must not get into the
drain hole.
Defrosting
Fridge zone and DailyFresh drawer
The fridge zone and the DailyFresh
drawer defrost automatically.
Condensate and frost can build up on
the back wall of the fridge zone whilst
the compressor is running. You do not
need to remove this.
The condensate drains through a
condensate channel and condensate
drain hole into the evaporation system
at the back of the refrigeration
appliance. The warmth generated by the
compressor causes the condensate to
evaporate automatically.
Cleaning agents
Cleaning and conditioning agents
used in the interior cabinet of the
refrigeration appliance must be food
safe.
To avoid damaging the surfaces of the
appliance, do not use the following:
- Cleaning agents containing soda,
ammonia, acids or chlorides
- Cleaning agents containing descaling
agents
- Abrasive cleaning agents (e.g.
scouring powder, scouring liquid or
pumice stones)
- Cleaning agents containing solvents
- Stainless steel cleaners
- Dishwasher cleaner
- Oven sprays
- Glass cleaning agents
- Hard, abrasive sponges and brushes
(e.g. pot scourers)
- Eraser stain remover blocks
- Sharp metal scrapers
We recommend using a clean sponge
and lukewarm water with a little
washing-up liquid to clean the surfaces
of the appliance.
Preparing the refrigeration
appliance for cleaning
Tip: Switch Cleaning mode on. The
cooling in the fridge zone is switched
off, but the interior lighting remains
switched on.
Tap.
Swipe left or right until is shown in
the middle.
Tap.
To leave this Settings level, tap.
If Cleaning mode is switched on,
this will be indicated on the start
display.
Take any food out of the appliance
and store it in a cool place.
Cleaning and care
47
Take out any removable accessories
for cleaning (see “Removing,
dismantling and cleaning
accessories”).
Cleaning the inside of the
appliance
The refrigeration appliance should be
cleaned regularly (at least once a
month).
If soiling is left on for any length of
time, it may become impossible to
remove under certain circumstances.
Surfaces may suffer discolouration or
damage.
It is therefore best to remove any
soiling immediately.
Clean the interior with a clean
sponge, lukewarm water and a little
washing-up liquid.
After cleaning, wipe with clean water
and dry with a soft cloth.
Clean the condensate channel and
drain hole frequently using a cotton
swab or similar item to ensure that
condensate can drain away freely.
Leave the door open to air the
refrigeration appliance sufficiently for
a short while and to prevent odour
build-up.
Cleaning accessories by hand
or in the dishwasher
The following components must be
cleaned by hand only:
- The stainless steel trims or strips
- Flexible bottle rack
- Door shelf with fine adjustment
- Adapters for the split shelf
- Protective strips at the back of the
adjustable shelves
- Adjustable shelf with printing
- All drawers and compartment lids
(these vary depending on model)
- The plastic parts of the adjustable
shelf with pivotable glass shelf
(available as optional accessory)
- Organisation box (available as an
optional accessory)
The following components are
dishwasher-safe:
Risk of damage due to high
dishwasher temperatures.
Parts of the refrigeration appliance
may become unusable, e.g. deform, if
they are washed in the dishwasher at
more than 55°C.
For dishwasher-safe components,
always select dishwasher
programmes with a maximum
temperature of 55°C.
Contact with natural dyes from
carrots, tomatoes and ketchup, etc.,
may discolour the plastic parts in the
dishwasher. This discolouration does
not affect the stability of the parts.
- Bottle holder, egg tray
- Shelves and bottle shelves in the
appliance door (without stainless
steel trim)
- The guide rails for the door shelf with
fine adjustment
- Adjustable shelves (without the trim
or printing)
- The holder for the charcoal filter
(available as an optional accessory)
Cleaning and care
48
Removing and dismantling
accessories for cleaning
Removing the door shelf with fine
adjustment
Hold the door shelf in both hands,
press the grey buttons on both sides
under it and slide it up off the guide
rails.
Remove the guide rail from the lugs.
Once you have cleaned it, move the
guide rail to the desired position and
place the second guide rail parallel to
the first rail on the opposite side.
Push the shelf back down onto the
guide rails.
Dismantling the door shelf/bottle shelf
Remove the stainless steel trim before
cleaning the door shelf/bottle rack in a
dishwasher.
To remove the stainless steel trim,
proceed as follows:
Place the door shelf/bottle rack on
the worktop.
Press the latch out of the recess. The
entire section of stainless steel trim
will now come off the shelf.
After cleaning, reattach the stainless
steel trim to the shelf by following the
same procedure in reverse.
Dismantling the adjustable shelf/
adjustable shelf with lighting
Risk of damage as a result of
incorrect cleaning.
The stainless steel trim with LED
lighting will be damaged if you place
it in water for cleaning.
Clean the stainless steel trim with
LED lighting with a damp cloth.
Remove the stainless steel trim or
stainless steel trim with LED lighting
and the rear protective strip before
cleaning the adjustable shelf.
Place the adjustable shelf on a soft
surface (e.g. a tea towel) on the
worktop with the top side facing
downward.
Cleaning and care
49
Risk of damage as a result of
incorrect handling.
When you remove the stainless steel
trim with LED lighting, the metal
contacts can be damaged.
These contacts in the front left
corner supply power to the LED
lighting. Ensure that you always
loosen the side on which the
contacts are not located first.
Grasp the plastic surround on the left-
hand side of the stainless steel trim at
its rearmost point.
1. Pull the plastic surround from the
adjustable shelf and
2. pull the trim off at the same time.
The opposite side will also be
released.
3. Then pull the protective strip off.
After cleaning, reattach the stainless
steel trim and protective strip by
following the same procedure in
reverse.
Dismantling a split shelf
Remove the trim and the protective
strip before cleaning the shelf. Proceed
as follows:
Place the shelf on a worktop covered
with a soft material (e.g. a tea towel).
Pull the trim off the shelf, beginning at
one side.
Pull the protective strip off, beginning
at one side.
Pull the two adapters off the support
ribs on the left and right.
After cleaning, attach the two
adapters to the support ribs on the
left and right at the desired height.
Reattach the trim and the protective
strip to the shelf.
Removing the drawers from the fridge
zone
Pull the drawer halfway out.
1
2
3
1
Push the drawer down at the front
until it lifts up at the back. Keep
pushing the drawer down.
Now carefully insert the left and
then the right rail by approx. 2cm.
Using both hands, pull the drawer
firmly forwards.
Push the telescopic rails back in
again to avoid damaging them.
Fitting the drawers
Place the drawer on the fully retracted
rails.
Cleaning and care
50
Push the drawer into the refrigeration
appliance until it clicks into position.
Removing the dividing plate
Remove the dividing plate.
After cleaning, slide the dividing plate
back in again.
Removing the compartment cover
Lift the cover at the front and pull it
out.
After cleaning, slide the compartment
cover back in again.
Replacing the charcoal filters (optional
accessories)
Replace the charcoal filters in the holder
every 6months.
The symbol on the start display
reminds you that the charcoal filter
needs to be changed.
Replacement KKF-RF charcoal filters
can be obtained from your Miele
dealer, Miele or via the internet at
www.miele-shop.com.
Pull the charcoal filter holder upwards
to remove it from the adjustable shelf.
When in position, the charcoal filters
must not touch the rear wall of the
refrigeration appliance as the
moisture could cause them to stick
to it.
Insert the new charcoal filters deep
enough in the holder to ensure that
they do not protrude over the edge of
the holder.
Remove both charcoal filters and
place the new charcoal filters with the
surrounding edge pointing
downwards in the holder.
Place the holder in the middle of the
protective strip at the back of any
adjustable shelf so that it clicks into
position.
Cleaning and care
51
Touch the symbol on the start
display to confirm that you have
changed the charcoal filters.
The “Replace charcoal filter” reminder
will go out on the display and the
counter will be reset.
The symbol will go out on the start
display.
Cleaning the door seal
Risk of damage as a result of
incorrect cleaning.
If you treat the door seal with oils or
grease, it can become porous.
Do not use any oils or grease on the
door seal.
The door seal should be cleaned
regularly with clean water, and then
wiped dry with a soft cloth.
Cleaning the ventilation gaps
A build-up of dust will increase the
energy consumption of the appliance.
The ventilation gaps should be
cleaned on a regular basis with a
brush or vacuum cleaner (you could
use a Miele vacuum cleaner dusting
brush, for example).
After cleaning
Switch the Cleaning mode function
off again by tapping on on the
start display.
Tap again.
When Cleaning mode is switched off,
the symbol will light up white.
The refrigeration appliance will start
cooling again.
Replace all shelves and accessories in
the refrigeration appliance.
Switch on the SuperCool function
for a while so that the temperature
inside the refrigeration appliance will
drop quickly.
Place food in the refrigeration
appliance as soon as it reaches the
required coldness.
Close the appliance door(s).
Troubleshooting
52
Many malfunctions and faults can be easily remedied. You can save time and
money in many cases, as you do not need to contact Customer Service.
More information to help you remedy faults yourself can be found at
www.miele.co.uk/support/customer-assistance.
To prevent unnecessary loss of temperature it is advisable not to open the door
while waiting for the appliance to be serviced.
Problem Cause and remedy
The compressor is
switching on more fre-
quently and for longer
periods of time. The
temperature in the refri-
geration appliance is too
low.
The ventilation gaps have been covered or become
too dusty.
Do not block the ventilation gaps.
Dust the ventilation gaps regularly.
The appliance door has been opened too frequently. A
large amount of fresh food has been placed in the
appliance.
Only open the appliance door when necessary and
for as short a time as possible.
After a while, the temperature will return to normal by
itself.
The appliance door is not properly closed.
Close the appliance door.
After a while, the temperature will return to normal by
itself.
The ambient temperature is too high. The higher the
ambient temperature, the longer the compressor runs.
See the information in “Installation – Installation
site”.
The refrigeration appliance was not properly installed
in the niche.
Install the refrigeration appliance in the niche as
described in the installation instructions supplied
with it.
The temperature setting in the refrigeration appliance
is too low.
Correct the temperature setting.
The SuperCool function is still switched on.
Troubleshooting
53
Problem Cause and remedy
Switch off the SuperCool function earlier to save
energy.
Other problems
Problem Cause and remedy
There is no audible alarm
even though the appli-
ance door has been
open for a long time.
This is not a fault. The alarm has been switched off in
Settings mode. If you want to switch the audible alarm
back on again:
Tap.
Swipe left or right until is shown in the middle.
Tap.
Select the volume you want by swiping the segment
bar to the right.
Confirm the setting you want by tapping the
segment bar.
When the alarms and buzzers are switched on,
orange will appear.
Display warnings
Message Cause and remedy
lights up on the start
display, the refrigeration
appliance does not get
cold even though the
controls and the interior
lighting are working.
Demo mode has been activated.
Tap.
Tap.
Swipe left or right until is shown in the middle.
Tap.
After Demo mode has been switched off, the
refrigeration appliance shuts down and must be
switched on again.
is lit up on the dis-
play and the appliance
cannot be used.
The Cleaning mode function is still switched on.
Switch the Cleaning mode function off again by
tapping on on the start display.
Tap again.
When Cleaning mode is switched off, the symbol
will light up white.
The refrigeration appliance will start cooling again.
Troubleshooting
54
Message Cause and remedy
Nothing is visible in the
display. The display is
completely blank.
Sabbath mode is switched on: the interior lighting is
switched off and the refrigeration appliance is cooling.
Tap the black display.
will appear in the display.
Tap .
will light up orange.
Tap again.
When Sabbath mode is switched off, will light up
white.
is lit up on the display
and the appliance can-
not be used.
The lock function has been activated.
Unlock the refrigeration appliance temporarily or
switch the lock function off completely (see
“Selecting further settings – Deactivating the lock
function/ temporarily/switching off
completely”).
The symbol lights up
on the start display and
a buzzer also sounds.
The charcoal filter change indicator on the start
display reminds you that the charcoal filter needs to
be changed.
Replace the charcoal filter in the holder (see
“Cleaning and care – Replacing the charcoal filters
(optional accessories)”) and touch the symbol on
the display to confirm that you have changed the
charcoal filter.
The symbol will go out on the start display.
will light up yellow in
the display, an alarm will
also sound and the in-
terior lighting will flash.
The door alarm has been activated.
Tap
.
The alarm will stop,
will go out and the interior
lighting will light up again constantly.
Troubleshooting
55
Message Cause and remedy
lights up red in the
display and a fault code
F with numbers may ap-
pear. An alarm is also
sounding.
There is a fault.
Tap on the display to switch the alarm off.
Contact the Miele Customer Service Department.
To report the fault, you need the fault code and also
the model identifier and serial number of your
refrigeration appliance. You can access this
information on the display:
To do this, touch on the display.
The appliance data required will be shown on the
display.
Confirm with to exit the information display and the
fault code will be shown again on the display.
The refrigeration appliance can be switched off
directly from the fault message display.
There is an appliance fault: this display always has
priority over any settings which have just been
selected.
An appliance fault has priority over any current door
and/or temperature alarms displayed.
Interior lighting
Problem Cause and remedy
Risk of electric shock due to exposed, live electrical components.
When removing the lighting cover, there is a risk of coming into contact with
live electrical components.
Do not remove the lighting cover. The LED lighting may only be repaired or
replaced by the Miele Customer Service Department.
Risk of injury from LED lighting.
This lighting corresponds to risk group RG2. If the cover is defective, there is a
risk of eye injury.
If the lighting cover is defective, do not look from a close range directly into the
lighting with optical instruments (e.g. magnifying glass or similar).
Troubleshooting
56
Problem Cause and remedy
The interior lighting is
not working.
The refrigeration appliance has not been switched on.
Switch the refrigeration appliance on.
Sabbath mode is switched on: the display is dark
and the refrigeration appliance is cooling.
Tap on the black display.
will appear on the display.
Tap.
lights up orange.
Tap on the symbol in Settings mode.
When Sabbath mode is switched off, the symbol
will light up white.
To avoid overheating, the lighting switches itself off
automatically after approx. 15minutes if the appliance
door is left open. If this is not the case, then there is a
fault.
Call the Miele Customer Service Department.
The LED lighting on one
of the adjustable shelves
is not working.
The shelf has not been positioned correctly on the
shelf supports.
Check that the shelf is positioned correctly on the
shelf supports. The shelf has metal contacts at the
front left corner which supply power to the LED
lighting.
Push the shelf in until it clicks into position.
The LED lighting on the stainless steel trim is faulty.
Replace the stainless steel trim with LED lighting. A
replacement is available from the Miele Customer
Service Department.
Troubleshooting
57
Problem Cause and remedy
The LED lighting is not
working on any of the
shelves.
Liquid has been spilt onto the LED lighting on one of
the shelves or into the contact openings on the left-
hand shelf supports.
The safety switch-off mechanism has switched off the
LED lighting on all the shelves.
Wipe the stainless steel trim with LED lighting with
a damp cloth and dry it or leave it outside the
refrigeration appliance to dry.
Make sure that the contacts are clean and dry
before replacing the shelves with lighting.
Push the shelf in until it clicks into position.
Close the appliance door.
The interior lighting will come on when the door is
opened again.
If this is not the case, then there is a fault.
Call the Miele Customer Service Department.
Service
58
Information to help you rectify faults
yourself and about Miele spare parts
can be found at www.miele.com/
service.
Contact in the event of a fault
In the event of a fault which you cannot
remedy yourself, please contact your
Miele dealer or Miele Customer Service.
You can book a Miele Customer
Service call-out online at
www.miele.com/service.
Contact information for Miele
Customer Service can be found at the
end of this document.
Please quote the model identifier and
serial number of your appliance (SN)
when contacting Miele Customer
Service. Both numbers can be found on
the data plate inside the refrigeration
appliance or, depending on the model,
in Settings mode under Information.
EPREL database
Since 1 March 2021, information on
energy labelling and ecodesign
requirements has been available in the
European Product Database (EPREL).
You can find the product database at
the following link https://
eprel.ec.europa.eu/. You will be asked to
enter the model identifier.
The model identifier can be found on the
data plate inside the refrigeration
appliance or, depending on the model,
in Settings mode under Information.
SN-ST
R600a:
XXXXXX
Nr. XX/ XXXXXXXXX.
XXX l
XXg
Warranty
The appliance warranty is valid for 2
years from date of purchase.
For further information, please refer to
the warranty conditions in the booklet
provided.
Information
59
Declaration of conformity
Miele hereby declares that this fridge-freezer complies with Directive 2014/53/EU.
The complete text of the EU declaration of conformity is available from one of the
following internet addresses:
- Products, Download from www.miele.co.uk
- For service, information, operating instructions etc: go to
https://miele.de/gebrauchsanweisungen and enter the name of the product or
the serial number
Frequency range of the WiFi module 2.4000–2.4835GHz
Maximum transmission power of the
WiFi module
<100mW
UK Conformity declaration
Miele hereby declares that this fridge-freezer complies with UK Radio Equipment
Regulations 2017, as amended.
The complete text of the UK declaration of conformity is available from one of the
following internet addresses:
- Products, Download from www.miele.co.uk
- For service, information, operating instructions etc: go to https://miele.co.uk/
manuals and enter the name of the product or the serial number
Frequency band of the WiFi module 2.4000GHz – 2.4835GHz
Maximum transmitting power of the
WiFi module
<100mW
Information
60
ThisStatement of Compliance confirms this Miele product fully complies with the
Product Security and Telecommunications Infrastructure (Security Requirements
for Relevant Connectable Products) Regulations 2023.
1) Household Appliance –
2)
Manufactured by: Miele & Cie KG,
Carl Miele Street 29, 33332 Gutersloh Germany
Imported by and contact point: Miele Company Ltd, Fairacres, Marcham Road,
Abingdon, Oxon, OX14 ITW Great Britain
The defined support period at the time of first supply is 10 years
3)
To report vulnerabilities and cybersecurity issues please contact: [email protected]4)
5) Signature
Name: Paul Wright
Company Position: Head of Technical Management
Date of signature: 19th March 2024
Place of signature:
Abingdon, Oxfordshire
Freezer - 120002, 120003, 220009, 320001, 320002
Refrigerator - 110001, 110002, 210010, 310001, 310002,
310003
Fridge-freezer - 130001, 130002, 130003, 130004,
330001, 330002
Wine unit - 210007, 210011, 310004, 330004
Copyrights and licences
For the purpose of operating and controlling the communication module, Miele
uses proprietary or third-party software that is not covered by open source
licensing terms. This software/these software components are protected by
copyright. The copyrights held by Miele and third parties must be respected.
Furthermore, the communication module integrated in the appliance contains
software components which are distributed under open source licence conditions.
The open source components contained in the appliance along with the
corresponding copyright notices, copies of the licensing terms valid at the time and
any further information can be accessed locally by IP via a web browser (http[s]://
<IP address>/Licenses). The liability and warranty arrangements for the open
source licences displayed in this location only apply in relation to the respective
rights holders.
United Kingdom
Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW
Tel: 0330 160 6600, Internet: www.miele.co.uk, E-mail: [email protected]
Australia
Miele Australia Pty. Ltd.
ACN 005 635 398
ABN 96 005 635 398
Level 4, 141 Camberwell Road
Hawthorn East, VIC 3123
Tel: 1300 464 353
E-mail: [email protected]
Internet: www.miele.com.au
Miele Electrical Appliances Co. Ltd.
No. 82, Shimenyi Road, JingAn District
Shanghai, China, P.R.C
Post Code: 200040
Phone: +86 21 6157 3500
Fax: +86 21 6157 3511
E-mail: info@miele.cn
Internet: www.miele.cn
China Mainland
Miele (Hong Kong) Ltd.
41/F - 4101, Manhattan Place
23 Wang Tai Road
Kowloon Bay, Hong Kong
Tel: (852) 2610 1025
Fax: (852) 3579 1404
E-mail:
Website: www.miele.hk
Hong Kong, China
Miele India Pvt. Ltd.
1st Floor, Copia Corporate Suites,
Commercial Plot 9, Mathura Road,
Jasola, New Delhi - 110025
E-mail: customercare@miele.in
Website: www.miele.in
India
Miele Ireland Ltd.
2024 Bianconi Avenue
Citywest Business Campus
Dublin 24
Tel: (01) 461 07 10
Fax: (01) 461 07 97
E-mail: [email protected]
Internet: www.miele.ie
Ireland
Malaysia
Miele Sdn Bhd
Suite 12-2, Level 12
Menara Sapura Kencana
Petroleum
Solaris Dutamas No. 1
Jalan Dutamas 1
50480 Kuala Lumpur, Malaysia
Phone: +603-6209-0288
Fax: +603-6205-3768
Miele New Zealand Limited
IRD 98 463 631
8 College Hill
Freemans Bay, Auckland 1011
Tel: 0800 464 353
Internet: www.miele.co.nz
New Zealand
Miele Pte. Ltd.
29 Media Circle
#11-04 ALICE@Mediapolis
Singapore 138565
Tel: +65 6735 1191
Fax: +65 6735 1161
E-mail: [email protected]
Internet: www.miele.sg
Singapore
Miele (Pty) Ltd.
63 Peter Place, Bryanston 2194
Tel: (011) 875 9000
Fax: (011) 875 9035
E-mail: [email protected]
Internet: www.miele.co.za
South Africa
Miele Appliances Ltd.
Showroom 1, Eiffel 1 Building
P.O. Box 114782 - Dubai
Tel. +971 4 3044 999
Fax. +971 4 3418 852
800-MIELE (64353)
E-mail: [email protected]
Website: www.miele.ae
United Arab Emirates
Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany
Thailand
Miele Appliances Ltd.
BHIRAJ TOWER at EmQuartier
43rd Floor Unit 4301-4303
689 Sukhumvit Road
North Klongton Sub-District
Vadhana District
Bangkok 10110, Thailand
Sheikh Zayed Road, Umm Al Sheif
E-mail: customercare@miele.co.nz
P.O. Box 69434, Bryanston 2021
M.-Nr. 12 583 950 / 03en-GB
K 7767 ...
