Technical Support and E-Warranty Certificate www.vevor.com/support
WATER JUG HOLDER
USER MANUAL
4 WATER BOTTLE RACK-S
4 WATER BOTTLE RACK-B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL:4 WATER BOTTLE RACK-S,4 WATER BOTTLE RACK-B
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WATER JUG HOLDER
- 2 -
SAFETY INSTRUCTIONS
WARNING:
Read this material before using this product. Failure to do so can
result in serious injury.
Assembly precautions
1. Assemble only according to these instructions. Improper assembly can
create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves
during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, drugs or
medication.
6. The product capabilities apply to properly and completely assembled
products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely
supporting the Water Jug Holder.
8. For additional information regarding the parts listed in the following
pages, please refer to the Assembly Diagram of this manual. Unwrap
and separate all parts in a clean work area.
Use precautions
1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near it.
3. Do not exceed specified weight capacities.
4. Use only on a flat, level, hard and smooth surface that can safely
support a fully loaded Water Jug Holder.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damaged.
SAVE THIS MANUAL
- 3 -
PARTS LIST
- 4 -
ASSEMBLY STEP
Two Installation Methods
(To page 5,page 6,page 7)
(To page 8,page 9,page 10)
- 5 -
Downtilt
STEP 1
STEP 2
- 6 -
Downtilt
STEP 3
STEP 4
- 7 -
Downtilt
STEP 5
STEP 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 8 -
Uptilt
STEP 1
STEP 2
- 9 -
Uptilt
STEP 3
STEP 4
- 10 -
Uptilt
STEP 5
STEP 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 11 -
PRODUCT PARAMETER
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
shanghai 200000 CN.
Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
Model
4 Water Bottle Rack-S
4 Water Bottle Rack-B
Colour
Silver
Black
Safe Loading Weight
4 x Water Bucket (19kg)
Capacity
4
Product Size
332*330*1047mm
Techniczny Certyfikat wsparcia i e-gwarancji www.vevor.com/support
UCHWYT NA DZBANEK NA WODĘ
INSTRUKCJA obsługi
4 STOJAK NA BUTELKI Z WODĄ-S
4 STOJAK NA BUTELKI Z WODĄ – B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL: 4 STOJAKI NA BUTELKI Z WODĄ-S , 4 STOJAKI NA
BUTELKI Z WODĄ-B
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WATER JUG HOLDER
- 2 -
SAFETY INSTRUCTIONS
OSTRZEŻENIE:
Przeczytaj ten materiał przed użyciem tego produktu.
Niezastosowanie się do tego może spowodować poważne obrażenia.
Środki ostrożności podczas montażu
1. Montaż wyłącznie zgodnie z niniejszą instrukcją. Nieprawidłowy montaż
może stworzyć zagrożenie.
2. Podczas montażu należy nosić okulary ochronne i wytrzymałe rękawice
robocze zatwierdzone przez ANSI.
3. Utrzymuj miejsce zbiórki w czystości i dobrze oświetlone.
4. Podczas montażu trzymaj osoby postronne z dala od obszaru.
5. Nie montuj, jeśli jesteś zmęczony lub pod wpływem alkoholu,
narkotyków lub leków.
6. Możliwości produktu dotyczą wyłącznie produktów prawidłowo i
całkowicie zmontowanych.
7. Zmontuj na płaskiej, poziomej, twardej i gładkiej powierzchni, która
może bezpiecznie utrzymać uchwyt na dzbanek na wodę.
8. Dodatkowe informacje dotyczące części wymienionych na kolejnych
stronach można znaleźć w schemacie montażu w niniejszej instrukcji.
Rozpakuj i oddziel wszystkie części w czystym miejscu pracy.
Stosuj środki ostrożności
1. NIE SIEDŹ ANI NIE STAJ NA TYM PRZEDMIOCIE.
2. Ten produkt nie jest zabawką. Nie pozwalaj dzieciom bawić się z nim
lub w jego pobliżu .
3. Nie przekraczaj podanego pojemności wagowe.
4. Używaj wyłącznie na płaskiej, równej, twardej i gładkiej powierzchni,
która może bezpiecznie utrzymać w pełni naładowany uchwyt na
dzbanek na wodę.
5. Używaj wyłącznie zgodnie z przeznaczeniem.
6. Sprawdź przed każdym użyciem; nie używać, jeśli części są luźne lub
uszkodzone.
- 3 -
ZACHOWAJ TĘ INSTRUKCJĘ
PARTS LIST
- 4 -
ASSEMBLY STEP
Dwie metody instalacji
(To page 5,page 6,page 7)
(To page 8,page 9,page 10)
- 5 -
Pochylenie w dół
KROK 1
KROK 2
- 6 -
Pochylenie w dół
KROK 3
KROK 4
- 7 -
Pochylenie w dół
KROK 5
KROK 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 8 -
Podwyższenie
KROK 1
KROK 2
- 9 -
Podwyższenie
KROK 3
KROK 4
- 10 -
Podwyższenie
KROK 5
KROK 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 11 -
PRODUCT PARAMETER
Producent: Shanghaimuxinmuyeyouxiangongsi
Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
szanghaj 200000 CN.
Import do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW
2122 Australia
Import do USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place,
Rancho Cucamonga, CA 91730
Model
4 Stojak na butelki z
wodą-S
4 Stojak na butelki z
wodą – B
Kolor
Srebro
Czarny
Bezpieczna waga
załadunku
4 x wiadro na wodę (19kg)
Pojemność
4
Rozmiar produktu
332*330*1047mm
- 12 -
Technisch Support und E-Garantie-Zertifikat www.vevor.com/support
WASSERKRUGHALTER
Benutzerhandbuch
4 WASSERFLASCHENHALTER-S
4 WASSERFLASCHENHALTER-B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODELL: 4 WASSERFLASCHENSTÄNDER-S , 4
WASSERFLASCHENSTÄNDER-B
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WATER JUG HOLDER
- 2 -
SAFETY INSTRUCTIONS
WARNUNG:
Lesen Sie dieses Material, bevor Sie dieses Produkt verwenden.
Andernfalls kann es zu schweren Verletzungen kommen.
Vorsichtsmaßnahmen bei der Montage
1. Führen Sie die Montage nur gemäß dieser Anleitung durch. Eine
unsachgemäße Montage kann zu Gefahren führen.
2. Tragen Sie während der Montage eine ANSI-geprüfte Schutzbrille und
robuste Arbeitshandschuhe.
3. Halten Sie den Versammlungsbereich sauber und gut beleuchtet.
4. Halten Sie während der Montage unbeteiligte Zuschauer vom Bereich
fern.
5. Nicht zusammenbauen, wenn Sie müde sind oder unter Einfluss von
Alkohol, Drogen oder Medikamenten stehen.
6. Die Produktfunktionen gelten nur für ordnungsgemäß und vollständig
montierte Produkte.
7. Montieren Sie es auf einer flachen, ebenen, harten und glatten
Oberfläche, auf der der Wasserkrughalter sicher stehen kann.
8. Weitere Informationen zu den auf den folgenden Seiten aufgeführten
Teilen finden Sie im Montagediagramm dieses Handbuchs. Packen Sie
alle Teile in einem sauberen Arbeitsbereich aus und trennen Sie sie.
Vorsichtsmaßnahmen treffen
1. SETZEN ODER STELLEN SIE SICH NICHT AUF DIESEN GEGENSTAND.
2. Dieses Produkt ist kein Spielzeug. Erlauben Sie Kindern nicht, damit
oder in der Nähe des Produkts zu spielen .
3. Sie nicht die angegebenen Gewichtskapazitäten.
4. Nur auf einer flachen, ebenen, harten und glatten Oberfläche
verwenden, die einen voll beladenen Wasserkrughalter sicher tragen
kann.
5. Nur bestimmungsgemäß verwenden.
6. Vor jedem Gebrauch prüfen; nicht verwenden, wenn Teile lose oder
- 3 -
beschädigt sind.
BEWAHREN SIE DIESES HANDBUCH AUF
PARTS LIST
- 4 -
- 5 -
ASSEMBLY STEP
Zwei Installationsmethoden
(To page 5,page 6,page 7)
(To page 8,page 9,page 10)
- 6 -
Abwärtsneigung
SCHRITT 1
SCHRITT 2
- 7 -
Abwärtsneigung
SCHRITT 3
SCHRITT 4
- 8 -
Abwärtsneigung
SCHRITT 5
SCHRITT 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 9 -
Aufwärtsneigung
SCHRITT 1
SCHRITT 2
- 10 -
Aufwärtsneigung
SCHRITT 3
SCHRITT 4
- 11 -
Aufwärtsneigung
SCHRITT 5
SCHRITT 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 11 -
PRODUCT PARAMETER
Hersteller: Shanghaimuxinmuyeyouxiangongsi
Adresse: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu,
Shanghai 200000 CN.
Nach AUS importiert: SIHAO PTY LTD. 1 ROKEVA
STREETEASTWOOD NSW 2122 Australien
Importiert in die USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
Modell
4
Wasserflaschenhalter-S
4
Wasserflaschenhalter-B
Farbe
Silber
Schwarz
Sicheres Ladegewicht
4 x Wassereimer (19kg)
Kapazität
4
Produktgröße
332*330*1047 mm
- 12 -
Technique Assistance et certificat de garantie électronique
www.vevor.com/support
PORTE-CRUCHE D'EAU
MANUEL DE l' Utilisateur
SUPPORT POUR 4 BOUTEILLES D'EAU-S
SUPPORT POUR 4 BOUTEILLES D'EAU-B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODÈLE : SUPPORT POUR 4 BOUTEILLES D'EAU-S , SUPPORT
POUR 4 BOUTEILLES D'EAU-B.
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WATER JUG HOLDER
- 2 -
SAFETY INSTRUCTIONS
AVERTISSEMENT:
Lisez ce document avant d'utiliser ce produit. Ne pas le faire peut
entraîner des blessures graves.
Précautions de montage
1. Assemblez uniquement selon ces instructions. Un assemblage
incorrect peut créer des dangers.
2. Portez des lunettes de sécurité approuvées par l'ANSI et des gants de
travail robustes pendant l'assemblage.
3. Gardez la zone de rassemblement propre et bien éclairée.
4. Gardez les spectateurs hors de la zone pendant l’assemblage.
5. Ne vous rassemblez pas si vous êtes fatigué ou sous l’influence de l’
alcool, de drogues ou de médicaments.
6. Les capacités du produit s'appliquent uniquement aux produits
correctement et complètement assemblés.
7. Assemblez-le sur une surface plane, nivelée, dure et lisse, capable de
supporter en toute sécurité le support de carafe à eau.
8. Pour plus d'informations concernant les pièces répertoriées dans les
pages suivantes, veuillez vous référer au schéma d'assemblage de ce
manuel. Déballez et séparez toutes les pièces dans une zone de travail
propre.
Utiliser des précautions
1. NE PAS ÊTRE ASSIS OU DEBOUT SUR CET ARTICLE.
2. Ce produit n'est pas un jouet. Ne laissez pas les enfants jouer avec ou à
proximité .
3. Ne dépassez pas les spécifications capacités de poids.
4. Utiliser uniquement sur une surface plane, nivelée, dure et lisse
pouvant supporter en toute sécurité un support de carafe à eau
entièrement chargé.
- 3 -
5. Utiliser uniquement comme prévu.
6. Inspectez avant chaque utilisation ; ne pas utiliser si les pièces sont
desserrées ou endommagées.
CONSERVEZ CE MANUEL
PARTS LIST
- 4 -
- 5 -
ASSEMBLY STEP
Deux méthodes d'installation
(To page 5,page 6,page 7)
(To page 8,page 9,page 10)
- 6 -
Inclinaison vers le bas
ÉTAPE 1
ÉTAPE 2
- 7 -
Inclinaison vers le bas
ÉTAPE 3
ÉTAPE 4
- 8 -
Inclinaison vers le bas
ÉTAPE 5
ÉTAPE 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 9 -
Inclinable
ÉTAPE 1
ÉTAPE 2
- 10 -
Inclinable
ÉTAPE 3
ÉTAPE 4
- 11 -
Inclinable
ÉTAPE 5
ÉTAPE 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 11 -
PRODUCT PARAMETER
Fabricant : Shanghaimuxinmuyeyouxiangongsi
Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
Shanghai 200000 CN.
Importé en Australie : SIHAO PTY LTD. 1 ROKEVA STREETASTWOOD
NSW 2122 Australie
Importé aux États-Unis : Sanven Technology Ltd. Suite 250, 9166
Anaheim Place, Rancho Cucamonga, CA 91730
Modèle
Support pour 4
bouteilles d'eau-S
Support pour 4
bouteilles d'eau-B
Couleur
Argent
Noir
Poids de chargement
sûr
4 x seau à eau (19 kg)
Capacité
4
Taille du produit
332*330*1047mm
- 12 -
Technisch Ondersteuning en e-garantiecertificaat www.vevor.com/support
HOUDER VOOR WATERKAN
Handleiding
4 BIDONREK-S
4 FLESSENREK-B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL: 4 FLESSENREK-S , 4 FLESSENREK-B
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WATER JUG HOLDER
- 2 -
SAFETY INSTRUCTIONS
WAARSCHUWING:
Lees dit materiaal voordat u dit product gebruikt. Als u dit niet doet,
kan dit leiden tot ernstig letsel.
Voorzorgsmaatregelen voor montage
1. Monteer uitsluitend volgens deze instructies. Onjuiste montage kan
gevaren veroorzaken.
2. Draag tijdens de montage een ANSI-goedgekeurde veiligheidsbril en
stevige werkhandschoenen.
3. Houd de verzamelplaats schoon en goed verlicht.
4. Houd omstanders tijdens de montage uit de buurt.
5. Niet monteren als u moe bent of onder invloed bent van alcohol, drugs
of medicijnen.
6. De productmogelijkheden zijn alleen van toepassing op correct en
volledig gemonteerde producten.
7. Monteer op een vlakke, vlakke, harde en gladde ondergrond die de
waterkanhouder veilig kan ondersteunen.
8. Voor aanvullende informatie over de onderdelen die op de volgende
pagina's worden vermeld, verwijzen wij u naar het montageschema van
deze handleiding. Pak alle onderdelen uit en scheid ze van elkaar op
een schone werkplek.
Gebruik voorzorgsmaatregelen
1. ZIT OF STA NIET OP DIT ITEM.
2. Dit product is geen speelgoed. Laat kinderen er niet mee of in de buurt
van spelen .
3. Overschrijd de aangegeven waarde niet gewicht capaciteiten.
4. Gebruik het apparaat alleen op een vlakke, vlakke, harde en gladde
ondergrond die een volledig geladen waterkanhouder veilig kan
ondersteunen.
5. Alleen gebruiken zoals bedoeld.
6. Inspecteer vóór elk gebruik; niet gebruiken als onderdelen los of
- 3 -
beschadigd zijn.
BEWAAR DEZE HANDLEIDING
PARTS LIST
- 4 -
- 5 -
ASSEMBLY STEP
Twee installatiemethoden
(To page 5,page 6,page 7)
(To page 8,page 9,page 10)
- 6 -
Neerwaarts kantelen
STAP 1
STAP 2
- 7 -
Neerwaarts kantelen
STAP 3
STAP 4
- 8 -
Neerwaarts kantelen
STAP 5
STAP 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 9 -
Omhoog
STAP 1
STAP 2
- 10 -
Omhoog
STAP 3
STAP 4
- 11 -
Omhoog
STAP 5
STAP 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 11 -
PRODUCT PARAMETER
Fabrikant: Shanghaimuxinmuyeyouxiangongsi
Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
shanghai 200000 CN.
Geïmporteerd naar AUS: SIHAO PTY LTD. 1 ROKEVA
STREETEASTWOOD NSW 2122 Australië
Geïmporteerd naar de VS: Sanven Technology Ltd. Suite 250, 9166
Anaheim Place, Rancho Cucamonga, CA 91730
Model
4 bidonrek-S
4 Flessenrek-B
Kleur
Zilver
Zwart
Veilig laadgewicht
4 x Wateremmer ( 19kg)
Capaciteit
4
Product grootte
332*330*1047mm
Teknisk Support och e-garanticertifikat www.vevor.com/support
HÅLLARE FÖR VATTENKANNA
Användarmanual
4 VATTENFLASKSTÄLL-S
4 VATTENFLASKSTÄLL-B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODELL: 4 VATTENFLASKSTÄLL-S , 4 VATTENFLASKSTÄLL-B
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WATER JUG HOLDER
- 2 -
SAFETY INSTRUCTIONS
VARNING:
Läs detta material innan du använder denna produkt. Underlåtenhet
att göra det kan resultera i allvarliga skador.
Försiktighetsåtgärder vid montering
1. Montera endast enligt dessa instruktioner. Felaktig montering kan skapa
faror.
2. Använd ANSI-godkända skyddsglasögon och kraftiga arbetshandskar
vid montering.
3. Håll monteringsområdet rent och väl upplyst.
4. Håll åskådare borta från området under monteringen.
5. Sätt dig inte ihop om du är trött eller påverkad av alkohol, droger eller
medicin.
6. Produktegenskaperna gäller endast för korrekt och färdigmonterade
produkter.
7. Montera på en plan, jämn, hård och slät yta som säkert kan stödja
vattenkannahållaren.
8. För ytterligare information om delarna som listas på följande sidor, se
monteringsdiagrammet i denna manual. Packa upp och separera alla
delar på ett rent arbetsområde.
Använd försiktighetsåtgärder
1. SIT ELLER STÅ INTE PÅ DETTA FÖREMÅL.
2. Denna produkt är inte en leksak. Låt inte barn leka med eller nära den .
3. inte specificerat viktkapacitet.
4. Använd endast på en plan, jämn, hård och slät yta som säkert kan
stödja en fulladdad vattenkannahållare.
5. Använd endast som avsett.
6. Inspektera före varje användning; Använd inte om delar är lösa eller
skadade.
SPARA DENNA MANUAL
- 3 -
PARTS LIST
- 4 -
ASSEMBLY STEP
Två installationsmetoder
(To page 5,page 6,page 7)
(To page 8,page 9,page 10)
- 5 -
Nedåtlutning
STEG 1
STEG 2
- 6 -
Nedåtlutning
STEG 3
STEG 4
- 7 -
Nedåtlutning
STEG 5
STEG 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 8 -
Uptilt
STEG 1
STEG 2
- 9 -
Uptilt
STEG 3
STEG 4
- 10 -
Uptilt
STEG 5
STEG 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 11 -
PRODUCT PARAMETER
Tillverkare: Shanghaimuxinmuyeyouxiangongsi
Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
shanghai 200000 CN.
Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD
NSW 2122 Australien
Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
Modell
4 vattenflaskställ-S
4 vattenflaskställ-B
Färg
Silver
Svart
Säker lastvikt
4 x vattenhink ( 19 kg)
C kapacitet
4
Produktstorlek
332*330*1047mm
Técnico Soporte y certificado de garantía electrónica www.vevor.com/support
SOPORTE PARA JARRA DE AGUA
de USUARIO
ESTANTE PARA 4 BOTELLAS DE AGUA-S
ESTANTE PARA 4 BOTELLAS DE AGUA B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODELO: 4 ESTANTES PARA BOTELLAS DE AGUA S , 4 ESTANTES
PARA BOTELLAS DE AGUA B
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WATER JUG HOLDER
- 2 -
SAFETY INSTRUCTIONS
ADVERTENCIA:
Lea este material antes de usar este producto. De lo contrario, se
pueden producir lesiones graves.
Precauciones de montaje
1. Ensamble únicamente de acuerdo con estas instrucciones. Un montaje
inadecuado puede crear peligros.
2. Use gafas de seguridad aprobadas por ANSI y guantes de trabajo
resistentes durante el montaje.
3. Mantenga el área de reunión limpia y bien iluminada.
4. Mantenga a los transeúntes fuera del área durante el montaje.
5. No se reúna si está cansado o bajo la influencia de alcohol, drogas o
medicamentos.
6. Las capacidades del producto se aplican únicamente a productos
ensamblados de manera adecuada y completa.
7. Ensamble sobre una superficie plana, nivelada, dura y lisa capaz de
soportar de manera segura el soporte para jarra de agua.
8. Para obtener información adicional sobre las piezas enumeradas en las
siguientes páginas, consulte el diagrama de montaje de este manual.
Desenvuelva y separe todas las piezas en un área de trabajo limpia.
Use precauciones
1. NO SE SIENTE NI SE PARE SOBRE ESTE ARTÍCULO.
2. Este producto no es un juguete. No permita que los niños jueguen con
él o cerca de él .
3. No exceda lo especificado capacidades de peso.
4. Úselo únicamente sobre una superficie plana, nivelada, dura y lisa que
pueda soportar de manera segura un soporte para jarra de agua
completamente cargado.
5. Úselo únicamente según lo previsto.
6. Inspeccionar antes de cada uso; no lo utilice si las piezas están sueltas
o dañadas.
- 3 -
GUARDE ESTE MANUAL
PARTS LIST
- 4 -
ASSEMBLY STEP
Dos métodos de instalación
(To page 5,page 6,page 7)
(To page 8,page 9,page 10)
- 5 -
Inclinación hacia abajo
PASO 1
PASO 2
- 6 -
Inclinación hacia abajo
PASO 3
PASO 4
- 7 -
Inclinación hacia abajo
PASO 5
PASO 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 8 -
inclinación hacia arriba
PASO 1
PASO 2
- 9 -
inclinación hacia arriba
PASO 3
PASO 4
- 10 -
inclinación hacia arriba
PASO 5
PASO 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 11 -
PRODUCT PARAMETER
Fabricante: Shanghaimuxinmuyeyouxiangongsi
Dirección: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
shanghai 200000 CN.
Importado a AUS: SIHAO PTY LTD. 1 ROKEVA STREET ASTWOOD
NSW 2122 Australia
Importado a EE. UU.: Sanven Technology Ltd. Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
Modelo
Estante para 4 botellas
de agua-S
Estante para 4 botellas
de agua B
Color
Plata
Negro
Peso de carga seguro
4 cubos de agua ( 19 kg)
Capacidad
4
Tamaño del producto
332*330*1047mm
- 12 -
Tecnico Supporto e certificato di garanzia elettronica www.vevor.com/support
PORTA BROCCA D'ACQUA
MANUALE D' uso
4 PORTABOTTIGLIE D'ACQUA-S
4 PORTABOTTIGLIE D'ACQUA-B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODELLO: PORTABOTTIGLIE PER 4 BOTTIGLIE D'ACQUA-S ,
PORTABOTTIGLIE PER 4 BOTTIGLIE D'ACQUA-B
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
WATER JUG HOLDER
- 2 -
SAFETY INSTRUCTIONS
AVVERTIMENTO:
Leggere questo materiale prima di utilizzare questo prodotto. In caso
contrario si potrebbero causare lesioni gravi.
Precauzioni per il montaggio
1. Assemblare solo secondo queste istruzioni. Un montaggio improprio
può creare pericoli.
2. Indossare occhiali di sicurezza approvati ANSI e guanti da lavoro
pesanti durante il montaggio.
3. Mantenere l'area di assemblaggio pulita e ben illuminata.
4. Tenere gli astanti lontani dall'area durante il montaggio.
5. Non montare se stanchi o sotto l'effetto di alcol, droghe o farmaci.
6. Le funzionalità del prodotto si applicano solo ai prodotti correttamente e
completamente assemblati.
7. Montare su una superficie piana, livellata, dura e liscia in grado di
sostenere in modo sicuro il supporto per brocca d'acqua.
8. Per ulteriori informazioni riguardanti le parti elencate nelle pagine
seguenti, fare riferimento allo Schema di Montaggio di questo manuale.
Scartare e separare tutte le parti in un'area di lavoro pulita.
Usare precauzioni
1. NON SEDERSI O STARE IN PIEDI SU QUESTO ARTICOLO.
2. Questo prodotto non è un giocattolo. Non permettere ai bambini di
giocare con esso o nelle sue vicinanze .
3. Non superare quanto specificato capacità di peso.
4. Utilizzare solo su una superficie piana, livellata, dura e liscia in grado di
supportare in modo sicuro un supporto per brocca d'acqua
completamente carico.
5. Utilizzare solo come previsto.
6. Ispezionare prima di ogni utilizzo; non utilizzare se le parti sono
allentate o danneggiate.
- 3 -
CONSERVA QUESTO MANUALE
PARTS LIST
- 4 -
ASSEMBLY STEP
Due metodi di installazione
(To page 5,page 6,page 7)
(To page 8,page 9,page 10)
- 5 -
Inclinazione verso il basso
FARE UN PASSO 1
FARE UN PASSO 2
- 6 -
Inclinazione verso il basso
FARE UN PASSO 3
FARE UN PASSO 4
- 7 -
Inclinazione verso il basso
FARE UN PASSO 5
FARE UN PASSO 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 8 -
Inclinazione
FARE UN PASSO 1
FARE UN PASSO 2
- 9 -
Inclinazione
FARE UN PASSO 3
FARE UN PASSO 4
- 10 -
Inclinazione
FARE UN PASSO 5
FARE UN PASSO 6
Drill holes in the wall according to the specified distances,
and install the provided wall anchors into the holes.
- 11 -
PRODUCT PARAMETER
Produttore: Shanghaimuxinmuyeyouxiangongsi
Indirizzo: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu,
shanghai 200000 CN.
Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Importato negli Stati Uniti: Sanven Technology Ltd. Suite 250, 9166
Anaheim Place, Rancho Cucamonga, CA 91730
Modello
4 Portabottiglie
d'acqua-S
4 Portabottiglie
d'acqua-B
Colore
Argento
Nero
Peso di caricamento
sicuro
4 secchi per l'acqua (19 kg)
Capacità
4
Taglia del prodotto
332*330*1047mm
- 12 -
