BAUMR-AG SW1 Cordless Mini Chainsaw Battery Powered User Manual

NOTE: Battery and charger

may not be included with your

purchase. Please refer to your

product’s online listing to

know what is included.

User Manual

[Revision 1.0]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY

VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description, and packaging.

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 2

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Wor

k areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear

appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

• P

etrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well-ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• U

sing a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

• K

eep packaging away from children and

pets, potential risk of suffocation or

choking.

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 3

General Electrical Safety

• I

nspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• E

lectrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• T

he equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Child Choking Hazard!

• W

ARNING

: CHOKING HAZARD - CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT

SUPERVISION REQUIRED.

• Carefully inspect anything a baby or child could gain access to, including this product & packaging.

• Dangers include anything of a size that could become stuck or lodged in a baby or child's airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys,

buttons, keys, and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces

of packaging, staples, tape etc.

• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

HAZARDOUS COMPONENTS!

• BE

AWARE THAT THE EQUIPMENT MAY INCLUDE HAZARDOUS COMPONENTS, SUCH AS BLADES, HOT SURFACES AND MOVING

PARTS.

• MOVING BLADES CAN CAUSE SERIOUS INJURY AND EVEN DEATH IF USED IMPROPERLY OR WITHOUT SUFFICIENT PPE.

• DO NOT USE THIS EQUIPMENT ON UNEVEN SURFACES AND ALWAYS MAINTAIN GOOD BALANCE WHEN USING THIS EQUIPMENT.

FAILURE TO DO SO MAY CAUSE SERIOUS INJURY.

• MAINTAIN A SECURE GRIP OF THE TRIGGER ASSEMBLY AT ALL TIMES.

General Power Tool Safety Warnings

• W

ARNING!

READ ALL SAFETY WARNINGS, INSTRUCTIONS, ILLUSTRATIONS, AND SPECIFICATIONS PROVIDED WITH THIS POWER

TOOL. FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE, AND/OR SERIOUS

INJURY.

• Save all warnings and instructions for future reference.

• The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work Area Safety

• K

eep the work area clean and well-lit. Cluttered or dark areas invite accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks

that may ignite the dust or fumes.

• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

• P

ower tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce the risk of electric shock.

• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions. Water entering a power tool increases the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil, sharp edges, or

moving parts. Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the

risk of electric shock.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 4

• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. The use of an RCD reduces

the risk of electric shock.

Personal Safety

• S

tay alert, pay attention to what you are doing, and use common sense when operating a power tool. Do not use a power tool if you are tired or

under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

• Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-slip safety shoes, hard hat, or

hearing protection, used in appropriate conditions, will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off position before connecting to the power source and/or battery pack, or when picking

up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool on. A wrench or key left attached to a rotating part of the power tool may

result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This ensures better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery, or long

hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and collection facilities, ensure they are connected and properly used. The use of

dust collection can reduce dust-related hazards.

• Do not let familiarity gained from frequent use of tools cause you to become complacent and ignore safety principles. A careless action can result

in severe injury in a fraction of a second.

Power Tool Use and Care

• D

o not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and more safely at the

rate for which it was designed.

• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must

be repaired.

• Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments,

changing accessories, or storing the power tool. Such preventive safety measures reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate it.

Power tools are dangerous in the hands of untrained users.

• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may

affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power

tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp edges are less likely to bind and are easier to control.

• Use the power tool, accessories, and tool bits in accordance with these instructions, taking into account the working conditions and the work to be

performed. Using the power tool for operations other than those intended could result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe

handling and control of the tool in unexpected situations.

Battery Tool Use and Care

• R

echarge only with the charger specified by the manufacturer. A charger suitable for one type of battery pack may create a fire risk if used with

another type.

• Use power tools only with specifically designated battery packs. Using any other battery packs may create a risk of injury and fire.

• When the battery pack is not in use, keep it away from other metal objects, such as paper clips, coins, keys, nails, screws, or other small metal

objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If accidental contact occurs, flush with water. If the liquid

contacts the eyes, seek medical help. Liquid ejected from the battery may cause irritation or burns.

• Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may behave unpredictably, resulting in fire,

explosion, or risk of injury.

• Do not expose a battery pack or tool to fire or excessive temperature. Exposure to temperatures above 130°C may cause explosion.

• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging

improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

• H

ave your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power

tool is maintained.

• Never service damaged battery packs. Battery pack servicing should only be performed by the manufacturer or authorised service providers.

General Safety Warnings for Garden Saw

• K

eep all parts of your body away from the saw chain when the chain saw is operating. Before starting the chain saw, ensure the saw chain is not

contacting anything. A moment of inattention while operating the garden saw may cause entanglement of your clothing or body with the saw

chain.

• Hold the power tool by insulated gripping surfaces only, as the saw chain may contact hidden wiring. Saw chains contacting a “live” wire may

make exposed metal parts of the power tool “live,” potentially giving the operator an electric shock.

• Wear safety glasses and hearing protection. Additional protective equipment for the head, hands, legs, and feet is recommended. Adequate

protective clothing will reduce personal injury from flying debris or accidental contact with the saw chain.

• Do not operate a garden saw in a tree. Operating a garden saw while up in a tree may result in personal injury.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 5

• Always maintain proper footing and operate the garden saw only when standing on a fixed, secure, and level surface. Slippery or unstable

surfaces, such as ladders, may cause a loss of balance or control of the garden saw.

• When cutting a limb under tension, be alert for spring back. When the tension in the wood fibres is released, the spring-loaded limb may strike the

operator and/or throw the garden saw out of control.

• Use extreme caution when cutting brush and saplings. The slender materials may catch the saw chain and be whipped toward you or pull you off

balance.

• Carry the garden saw by the main handle with the saw switched off and away from your body. When transporting or storing the garden saw,

always fit the guide bar cover. Proper handling of the garden saw reduces the likelihood of accidental contact with the moving saw chain.

• Follow instructions for lubricating, chain tensioning, and changing accessories. An improperly tensioned or lubricated chain may either break or

increase the chance of kickback.

• Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery and can cause a loss of control.

• Cut wood only. Do not use the garden saw for purposes not intended. For example, do not use the garden saw for cutting metal, plastic,

masonry, or non-wood building materials. Using the garden saw for unintended operations could result in a hazardous situation.

• This garden saw is not intended for tree felling. Using the garden saw for operations other than its intended purpose could result in serious injury

to the operator or bystanders.

• Follow all instructions when clearing jammed material, storing, or servicing the garden saw. Ensure the switch is off and the battery pack is

removed. Unexpected activation of the garden saw while clearing jammed material or servicing may result in serious personal injury.

• Only use replacement guide bars and saw chains specified by the manufacturer or equivalent replacements. Using non-approved cutting

attachments can result in personal injuries and property damage.

• Before using the garden saw and after any impact or dropping, check for signs of wear or damage and repair as necessary.

• Never remove or modify any guard or safety component. Ensure that guards and other safety components required for operation are in place, in

good working condition, and properly maintained to avoid injuries.

• Training is necessary for first-time and inexperienced operators.

Additional Safety Warnings for Garden Saw

• T

he garden saw is designed for cutting branches. Only use the garden saw as indicated in this instruction manual for cutting wood. It is not

designed for continuous, professional use.

• Children must not play with the machine. Keep the garden saw out of reach of children. It is not a toy.

• Persons with limited physical, sensory, or mental abilities are not allowed to use the garden saw unless supervised for their safety by a qualified

person or briefed by a responsible person on how to use the machine.

• Children and adolescents are not allowed to use the garden saw. The exception is for young people over 16 years of age under the supervision

of an expert for the purpose of training.

• Please take note of the warning symbols. They mark important safety instructions. Failure to observe these instructions could result in serious

injury.

• The garden saw must be used only by one person at a time. Ensure that bystanders do not remain near the garden saw’s work area.

• Check the safe operating condition of the garden saw, especially the guide bar and saw chain, before each operation.

• Always maintain a secure stance when working with the garden saw.

• Hold the garden saw firmly and securely when switching it on.

• Ensure the guide bar and saw chain are free when switched on and not in contact with the workpiece to be cut.

• Keep your hands away from the sawing area. Do not reach under the workpiece. Contact with the saw chain may result in serious injury.

• Guide the garden saw onto the workpiece only when it is switched on. Otherwise, there is a risk of kickback if the saw chain gets caught in the

workpiece.

• When sawing, the base plate must always rest against the workpiece. The saw chain can become jammed, leading to a loss of control over the

machine.

• After completing a cut, switch off the machine and only pull the saw chain out of the cut after it has come to a complete stop. This helps prevent

kickback.

• Securely clamp the material to be processed. Do not support the workpiece with your hand or foot. Do not allow the saw to come into contact with

objects or the floor while it is running to avoid kickback.

• When sawing converted timber and thin branches, always use a sturdy support, such as a sawing trestle. Do not stack timber pieces.

• Before cutting logs, ensure they are securely positioned.

• When working on sloping ground, always face upwards.

• Be particularly cautious when cutting splintered wood, as splinters can be caught by the saw chain and increase the risk of injury.

• Foreign objects such as nails, screws, metal parts, and sand will cause increased wear on the guide bar and saw chain.

• A blunt saw chain can cause overheating and damage to the motor.

• Always remove the battery pack when checking or adjusting the chain tension, mounting the saw chain, or eliminating faults. Also, remove the

battery pack if the machine will not be used temporarily.

• For optimal performance, the ambient temperature for tool and battery use should be between 5°C and 35°C.

• Always remove the battery pack and store the machine at a room temperature between 19°C and 25°C.

Causes and Operator Prevention of Kickback

• K

ickback may occur when the nose or tip of the guide bar touches an object or when the wood closes in and pinches the saw chain during a cut.

• Tip contact may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator.

• Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 6

• Either of these reactions may cause you to lose control of the saw, which could result in serious personal injury. Do not rely exclusively on the

safety devices built into your saw. As a garden saw user, you should take several steps to keep your cutting jobs free from accident or injury.

• Kickback is the result of garden saw misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions

as outlined below:

• Maintain a firm grip, with thumbs and fingers encircling the control handle, and position your body and arms to allow you to resist kickback

forces. Kickback forces can be controlled by the operator if proper precautions are taken. Do not let go of the garden saw.

• Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and allows for better control of the garden

saw in unexpected situations.

• Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars and chains may cause chain breakage

and/or kickback.

• Follow the manufacturer’s sharpening and maintenance instructions for the saw chain. Reducing the depth gauge height can lead to increased

kickback.

Additional Safety Warnings for Battery Pack

• T

he battery pack needs to be charged before use. Always refer to the charger’s instructions and charge it properly.

• Remove the battery pack from the machine when not in use.

• Battery packs must be removed from the machine before being charged.

• Do not leave the battery pack on the charger when not in use.

• After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.

• Longer life and better performance can be achieved if the battery is charged when the air temperature is between 18°C and 24°C. Do not charge

the battery when the air temperature is below 5°C or above 40°C. This is important to prevent serious damage to the battery.

• Do not charge the battery in a damp or wet location. Following this rule will reduce the risk of electric shock.

• Do not disassemble the battery and avoid mechanical damage to it. There is a risk of short circuit, and fumes may be emitted. Ensure fresh air

circulation and seek medical assistance in case of discomfort.

• When disposing of the battery pack, keep battery packs of different electrochemical systems separate from each other.

• Do not connect the positive and negative terminals of the battery with any metal object (such as wire).

• Do not carry or store the battery together with necklaces, hairpins, or other metal objects.

• Do not pierce the battery with nails, strike it with a hammer, step on it, or subject it to strong impacts or shocks.

• Do not solder directly onto the battery.

• Do not expose the battery to water or saltwater, and do not allow the battery to get wet.

• Do not disassemble or modify the battery.

• Do not place the battery in or near fire, on stoves, or other high-temperature locations. Do not place the battery in direct sunlight or use or store it

inside cars during hot weather.

• Do not place the battery in microwave ovens, high-pressure containers, or on induction cookware.

• If you intend to store the battery for a long period without use, store it at room temperature (19°C to 25°C), charged to about 30-50% of its

capacity. When storing for extended periods, boost charge the battery once a year to prevent over-discharge.

Vibration and Noise Reduction

To reduce the impact of noise and vibration emissions, limit the time of operation, use low-v

ibration and low-noise operating modes, and wear

personal protective equipment.

Take the following points into account to minimise vibration and noise exposure risks:

• Only use the power tool as intended by its design and these instructions.

• Ensure that the power tool is in good condition and well maintained.

• Use the correct attachments for the machine and ensure they are in good condition.

• Keep a tight grip on the handles or gripping surface.

• Maintain this power tool in accordance with these instructions and keep it well lubricated (where appropriate).

• Plan your work schedule to spread any high-vibration tool use over a longer period of time.

• Prolonged use of the power tool exposes the user to vibrations that can cause a range of conditions collectively known as hand-arm vibration

syndrome (HAVS), such as fingers turning white, as well as specific diseases like carpal tunnel syndrome. To reduce this risk, always wear

protective gloves and keep your hands warm when using the power tool.

The sound values have been determined according to the noise test code provided in EN 62841-1. The sound intensity level for the operator may

exceed 80 dB(A), making ear protection necessary.

The declared vibration total value(s) and the declared noise emission value(s) have been measured in accordance with a standard test method

(according to EN 62841-1) and may be used for comparing one product with another. These declared values may also be used in a preliminary

assessment of exposure.

WARNING! THE VIBRATION AND NOISE EMISSIONS DURING ACTUAL USE OF THE POWER TOOL MAY DIFFER FROM THE DECLARED

VALUES DEPENDING ON HOW THE TOOL IS USED, ESPECIALLY CONSIDERING THE TYPE OF WORKPIECE BEING PROCESSED.

IT IS ESSENTIAL TO IDENTIFY SAFETY MEASURES TO PROTECT THE OPERATOR, BASED ON AN ESTIMATION OF EXPOSURE UNDER

ACTUAL CONDITIONS OF USE. THIS SHOULD TAKE INTO ACCOUNT ALL PARTS OF THE OPERATING CYCLE, SUCH AS THE TIMES

WHEN THE TOOL IS SWITCHED OFF, RUNNING IDLE, AND THE TRIGGER TIME.

Emergency

Familiarise yourself with the use of this power tool by reading this instruction manual. Memorise the safety directions and fol

low them precisely to

help prevent risks and hazards.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 7

• Always remain alert when using this power tool, so you can recognise and manage risks early. Quick intervention can prevent serious injury and

property damage.

• Switch off the power tool and remove the battery pack if malfunctions occur. Have the machine checked by a qualified professional and repaired,

if necessary, before using it again.

Residual Risks

Even when operating this power tool in accordance with all safety requirements, potential risks of injury and damage remain. The following dangers

c

an arise due to the structure and design of the machine:

• Health defects resulting from vibration emissions if the power tool is used over long periods or not properly managed and maintained.

• Injuries and damage to property due to broken application tools or the sudden impact of hidden objects during use.

• Risk of injury and property damage caused by flying objects.

WARNING! THIS POWER TOOL PRODUCES AN ELECTROMAGNETIC FIELD DURING OPERATION! UNDER CERTAIN CIRCUMSTANCES,

THIS FIELD MAY INTERFERE WITH ACTIVE OR PASSIVE MEDICAL IMPLANTS. TO REDUCE THE RISK OF SERIOUS OR FATAL INJURY,

WE RECOMMEND THAT PERSONS WITH MEDICAL IMPLANTS CONSULT THEIR DOCTOR AND THE IMPLANT MANUFACTURER BEFORE

OPERATING THIS POWER TOOL.

Recycling and Disposal

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or

l

ocal store for recycling advice. The product comes in packaging that protects it against damage during shipping. Keep the packaging until you are

sure that all parts have been delivered and the product is working properly. Recycle the packaging afterwards.

Disposal of an Exhausted Battery Pack

• T

he battery is a Li-Ion type. To preserve natural resources, please recycle or dispose of the battery pack properly. Consult your local waste

authority for information regarding available recycling and/or disposal options.

• Discharge the battery pack by operating your tool, then remove the battery pack from the tool. Cover the battery pack connections with heavy-

duty adhesive tape to prevent short circuits and energy discharge.

• Do not attempt to open or remove any of the battery components.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 8

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 9

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Choking Hazard

Children under 8 yrs. Can choke

or suffocate on small parts. Adult

supervision required.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 10

Table of Contents

Safety ......................................................................................................................................................... 2

Safety Symbols ........................................................................................................................................................... 8

Parts Identification .................................................................................................................................. 11

Set-Up ....................................................................................................................................................... 13

Unpacking ................................................................................................................................................................. 13

Installing the Guide Bar and Saw Chain ................................................................................................................... 13

Adjusting the Chain Tension ..................................................................................................................................... 15

Attaching/Removing the Battery Pack ...................................................................................................................... 17

Charging the Battery Pack ........................................................................................................................................ 18

Battery Pack Indicators ............................................................................................................................................. 18

Operation ................................................................................................................................................. 19

Intended Use ............................................................................................................................................................ 19

Safety Devices and Operating Controls ................................................................................................................... 19

Check Before Starting............................................................................................................................................... 20

Starting the Machine ................................................................................................................................................. 21

Basic Operating / Cutting Procedure ........................................................................................................................ 22

Kickback ................................................................................................................................................................... 23

After Use ................................................................................................................................................................... 23

Lithium Battery Care and Maintenance .................................................................................................. 24

Top 3 Battery Care Requirements ............................................................................................................................ 24

Maintenance ............................................................................................................................................. 26

The Golden Rules for Care ....................................................................................................................................... 26

General Cleaning ...................................................................................................................................................... 26

Maintenance Table ................................................................................................................................................... 27

Guide Bar and Saw Chain Maintenance .................................................................................................................. 27

Saw Chain Sharpening ............................................................................................................................................. 28

Repair ....................................................................................................................................................................... 30

Storage ..................................................................................................................................................................... 30

Transportation ........................................................................................................................................................... 30

Troubleshooting ...................................................................................................................................... 31

Specifications .......................................................................................................................................... 32

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 11

Parts Identification

NOTE: Battery and

charger may not be

included with your

purchase. Please refer

to your product’s

online listing to know

what is included.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 12

No. Name No. Name

1 Chain guard 15 Cutting support

2 Saw chain 16 Drive sprocket

3 Guide bar 17 Mounting bolt

4

Lock lever

18

Tension pin

5

Fixing nut

19

Chain tension screw

6

Air vents

20

Guide bar cover

7

Handgrip area

21

Charger

8 Trigger lock-out 21a Indicators

9 Trigger switch 21b Power cord with plug

10 Control handle 22 Battery pack

11

Battery slot

22a

Release button

12

Hand guard

22b

Charging contacts

13

L-shaped crosshead screwdriver

22c

Battery capacity button

14 Sprocket cover 22d Battery capacity indicator

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 13

Set-Up

Unpacking

•

Unpack all parts and lay them on a flat, stable surface.

•

Remove all packing materials and protective shipping materials, including the foam pads fitted on the rear

wheels.

•

Ensure that the delivery contents are complete and free of any damage. If you find missing or damaged

parts, do not use the machine and contact your dealer. Using an incomplete or damaged machine poses a

hazard to both operators and property.

•

Make sure you have all the accessories and tools needed for assembly and operation, including suitable

personal protective equipment.

WARNING! The machine and the packaging are not children's toys! Children must not play with plastic

bags, sheets, or small parts, as there is a risk of choking and suffocation.

Installing the Guide Bar and Saw Chain

WARNING! The machine must be fully assembled before operation! Do not use a machine that is only

partly assembled or has damaged parts! Follow the assembly instructions step-by-step and use the

illustrations provided as a visual guide to easily assemble the machine! Do not connect the machine to

the battery pack (22) before it is completely assembled!

CAUTION! Risk of cuts! The teeth of the saw chain (2) are very sharp! Protective gloves must be worn

for any work on the saw chain (2).

NOTE: The saw chain (2) and guide bar (3) have been pre-assembled onto the machine. The machine

may only be used with the guide bar and saw chain combination stated in these instructions. The use of

other types or sizes is strictly prohibited.

1. Lay the machine flat on a stable and level surface.

2. Flip the lock lever (4) up and turn the fixing nut (5) anticlockwise to detach the sprocket cover (14) (Fig. 1).

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 14

3. Identify the correct chain direction. Wrap the saw chain (2) around the guide bar (3) (Fig. 2).

NOTE: The symbol indicates the direction in which the saw chain (2) runs. Ensure that the

saw chain (2) is fitted in the correct direction.

4. Turn the chain tension screw (19) anti-clockwise using the included phillips-head key (13) to adjust the

tension pin (18) to the right (Fig. 3).

5. Place the slot on the guide bar (3) over the mounting bolt (17) and fit the rest of the saw chain (2) around the

drive sprocket (16) (Fig. 4). Ensure that the tension pin (18) is engaged with the lower hole on the guide bar

(3).

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 15

6. Turn the chain tension screw (19) clockwise using the included phillips-head key (13) to adjust the tension

pin (18) to the left in order to tighten the chain (2) (Fig. 5).

7. Refit the sprocket cover (13). Flip the lock lever (4) up and tighten the tensioning knob (5), leaving the fixing

nut (5) slightly loose for chain tension adjustment.

NOTE: The chain tension cannot be adjusted with the fixing nut (5) fully tightened.

Adjusting the Chain Tension

WARNING! Remove the battery pack (22) from the machine before adjusting the tension of the saw chain

(2)!

WARNING! Always maintain proper chain tension! A correctly tightened chain provides the best cutting

characteristics and prolongs the working life of the machine.

Tensioning the saw chain (2) either too tightly or insufficiently can result in various negative

consequences:

•

Over-tightening the saw chain (2) puts excessive strain on the motor, leading to potential damage.

•

Insufficient tension can lead to chain derailment, resulting in the following:

− Increased risk of kickback.

− The saw chain (2) may jump out of the guide bar (3) groove, potentially causing injury to the

operator and damage to the saw chain (2).

− Rapid wear on the saw chain (2), guide bar (3), and drive sprocket (16).

WARNING! Risk of cuts! The teeth of the saw chain (2) are very sharp! Always wear protective gloves

when working on the saw chain (2).

NOTE: Always check the saw chain tension before use, after the first few cuts, and regularly during use,

approximately every five cuts. New chains may lengthen significantly during initial operation, which is

normal during the break-in period. The interval between future adjustments will quickly increase.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 16

1. Turn the chain tension screw (19) clockwise or anti-clockwise using the L-shaped cross-head screwdriver

(13) to adjust the chain tension (Fig. 7).

2. The correct chain tension is achieved when the chain (2) can be lifted by approximately 2-4 mm from the

guide bar (3) (Fig. 8).

Fully tighten the tension knob (5) to secure the guide bar (3) and the sprocket cover (14) in place (Fig. 9).

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 17

Attaching/Removing the Battery Pack

1. To attach the battery pack (22) to the machine, slide the battery pack (22) into the battery slot (11) on the

machine. The charging contacts (22b) are securely fastened when the battery pack (22) audibly clicks into

position (Fig. 10).

2. To remove the battery pack (22), press the release button (22a) and pull the battery pack (22) to detach it

from the battery slot (11) (Fig. 11).

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 18

Charging the Battery Pack

NOTE: The battery pack (22) for this machine has been shipped in a low charge condition. Charge it fully

before first use.

1. Connect the plug (21b) of the charger (21) to a suitable socket outlet. The green indicator (21a) will light up.

2. Align the raised ribs of the battery pack (22) with the battery slots of the charger (21), then slide the battery

pack (22) onto the slots of the charger (21) (Fig. 12). The red indicator (22a) lights up during charging.

3. The battery pack (22) is fully charged when the green indicator (21a) stays on. Slide the battery pack (22) off

the charger (21).

Battery Pack Indicators

The battery pack (22) features a battery capacity indicator (22d) that displays the battery level (Fig. 13). Press

and hold the battery capacity button (22c) to show the battery capacity on the indicator (22d).

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 19

Operation

Intended Use

The machine is intended for cutting branches with a maximum thickness of 12cm. It must not be used for cutting

other materials such as plastic, stone, metal, wood containing foreign objects, or materials that are harmful to

health. This machine should not be used outside of domestic premises, such as for cutting firewood in forested

areas.

The machine may only be used with the guide bar and saw chain combination stated in these instructions. The

use of other types or sizes is strictly prohibited, as it can result in serious personal injury or death.

For safety reasons, it is essential to read the entire user manual before first operation and to follow all the

instructions. This machine is intended for private domestic use only, and not for any commercial or trade use. It

must not be used for any purposes other than those described.

WARNING! The machine may only be used by an experienced operator* who has read and understood

the safety requirements provided in this instruction manual and is using appropriate personal protective

equipment (PPE).

*An experienced operator is a person who has the competence and knowledge in the use of and hazards associated with using a garden saw, as

well as the precautions to be taken to limit these hazards.

Safety Devices and Operating Controls

DANGER! Risk of injury! The machine must only be operated if no faults are present. If the trigger lock-

out (8) or trigger switch (9) is defective, do not use the machine. Have it repaired or replaced by a

qualified professional.

WARNING! Do not make any adjustments to the safety devices or operating controls.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 20

Trigger Lock-Out

The trigger lock-out (8) consists of two parts, positioned on the left and right sides of the control handle (10),

offering ease of use for both left-handed and right-handed operators. The trigger lock-out (8) prevents the trigger

switch (9) from being pressed or engaged accidentally.

Trigger Switch

By squeezing the trigger switch (9), the machine starts the motor and enables the rotation of the saw chain (2).

To stop the operation, release the start lever (1).

Chain Guard

The chain guard (1) acts as a barrier between the operator and the moving chain, preventing accidental contact

with the saw chain (2), particularly in the event of kickback.

Hand Guard

The hand guard (12) helps prevent small wood chips, sawdust, or other debris from coming into contact with the

operator’s hand during cutting.

Check Before Starting

•

Check the machine, battery pack, charger, and accessories for damage before each use. Do not use the

machine if it is damaged or shows signs of wear.

•

Ensure that the saw chain (2), guide bar (3), and sprocket cover (14) are properly installed.

•

Always hold the control handle (10) when operating the machine. The handgrip area (7) can be used as an

auxiliary handle when needed to maintain a comfortable and balanced posture. Keep the control handle (10)

and handgrip area (7) dry to ensure a secure grip.

•

Ensure that the air vents (6) are always unobstructed and clear. Clean them if necessary with a soft brush.

Blocked air vents (6) may lead to overheating and damage to the machine.

•

Use an oiler to lubricate the saw chain (2) and the drive sprocket (16) before performing any cuts.

NOTE: If the machine produces a rattling noise, it indicates the need for lubrication of the saw chain (2).

Use only commercially available, biodegradable chain oils. Do not use engine oil, waste oil, or other

mineral oils.

•

Release the trigger switch (9) to stop the machine immediately if you are disturbed by other people entering

the working area. Always let the machine come to a complete stop before putting it down.

•

Do not overexert yourself. Take regular breaks to ensure you can concentrate on the work and maintain full

control of the machine.

WARNING! In some countries, regulations define when the machine is allowed to be used and any

restrictions that apply. Check with your local community for detailed information and observe the

regulations to maintain a peaceful neighbourhood and avoid administrative offences.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 21

Starting the Machine

WARNING! Wear appropriate personal protective equipment when starting the machine.

NOTE: The machine can only be started by pressing the trigger lock-out (8) followed by squeezing the

trigger switch (9). Reverse operation cannot start the machine.

1. Attach the battery pack (22) to the battery slot (11).

2. While pressing the trigger lock-out (8), squeeze the trigger switch (9) and hold it in place (Fig. 14).

3. Once started, release the trigger lock-out (8).

4. Continue to hold the trigger switch (9) during operation.

5. To switch the machine off, release the trigger switch (9).

WARNING! The machine will continue to operate for a short time after the trigger switch (9) is released.

Always wait for all moving parts to come to a complete stop before putting the machine down.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

E&OE © Baumr-AG 22

Basic Operating / Cutting Procedure

1. To become proficient, attend a recognised garden saw training course to learn how to operate garden saws

safely and effectively. Familiarise yourself with all the controls and switches. Practise all movements with the

battery pack (22) removed.

2. Ensure you have a firm grip on the machine at all times. Hold the control handle (10) securely while

operating the machine. If needed, place your other hand on the handgrip area (7) as an auxiliary handle to

maintain a comfortable and balanced posture (Fig. 15).

3. Ensure the saw chain (2) is running at full speed before it makes contact with the wood. Use the cutting

support (15) to secure the machine onto the wood before starting to cut and use it as a leverage point while

cutting.

4. Never reach over the chain guard (1) or under the cutting support (15) to avoid the risk of injury.

5. Do not start the machine if the saw chain (2) is in contact with the workpiece, inside the workpiece, or may

hit an object. This can lead to serious injuries.

6. Clamp loose workpieces before cutting them. Remove foreign objects such as nails, screws, etc.

7. When cutting a branch that is under tension, be alert for spring back. When the tension in the wood fibres is

released, the spring-loaded limb may strike the operator and/or throw the machine out of control.

8. Use extreme caution when cutting brush and saplings. The slender material may catch the saw chain and be

whipped toward you or pull you off balance.

9. When the saw chain (2) is running, first place the cutting support (15) on the surface of the workpiece and let

the saw cut on its own. Apply only light pressure to the machine. The chain speed should not slow down

significantly.

10. Do not force the saw chain (2) while cutting—let the chain do the work.

11. Do not operate the machine with arms fully extended, attempt to saw areas that are difficult to reach, or use

it on a ladder. Never use the machine above shoulder height.

12. Optimum sawing is achieved if the chain speed remains constant during cutting.

13. Be cautious when reaching the end of the cut. The weight of the machine may shift unexpectedly as it cuts

free from the wood, which can cause accidents. Always remove the machine from the wood cut while it is

running.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

Kickback

WARNING! Beware of kickback! Kickback can lead to a dangerous loss of control of the machine and

result in serious or fatal injury to the operator or anyone standing nearby! Always be alert, as rotational

kickback and pinch kickback are major operational dangers and the leading cause of most accidents!

The chain guard (1) helps prevent the nose or tip of the guide bar from making contact with objects, providing

protection against kickback. Never modify, remove, or tamper with the chain guard (1).

Always maintain a firm grip with your thumbs and fingers encircling the control handle (10). A firm grip helps

maintain control of the machine and absorb the impact of kickback.

To avoid kickback:

•

Saw with the guide bar (3) at a flat angle.

•

Never work with a loose, overly stretched, or heavily worn saw chain (2).

•

Ensure the saw chain (2) is sharpened correctly.

•

Never saw above shoulder height.

•

Never work with the tip of the guide bar (3).

•

Always use a low kickback chain.

•

Apply the cutting support (15) for leverage on the workpiece.

•

Ensure the correct chain tension.

•

Only cut with the motor running at high speeds.

•

Follow the manufacturer’s sharpening and maintenance instructions for the saw chain.

•

Only use replacement guide bars and saw chains specified by the manufacturer or equivalent replacements.

WARNING! Most kickback accidents happen during limbing! Pay close attention to the position of the

“kickback” zone on the guide bar (3) when you are limbing branches that are under tension!

After Use

1. Switch the machine off, remove the battery pack (22), and allow it to cool down.

2. Check, clean, and store the machine as described in Maintenance section.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

Lithium Battery Care and Maintenance

Top 3 Battery Care Requirements

1. Charge battery before first use. The battery may arrive with some charge, regardless of this the

battery must be charged on the initial charge and for each subsequent charge.

2. Charge battery immediately when it is depleted. Do not store a depleted battery. This will

permanently impact the life of the battery. If the battery is going to be stored for a period of time, fully

charge the battery before storing.

3. Disconnect battery when not in use. To prolong the life of a battery, disconnect it from the unit

when not in use. Disconnect chargers from the battery once charged.

To ensure the battery maintains optimum performance, follow the guidelines outlined below.

•

For best results, charge batteries in temperatures between 10°C and 30°C

•

When battery is charged, disconnect the charger from the power supply and remove the battery from the

charger.

•

If a battery is stored or otherwise unused for an extended period, and the battery has no charge remaining

when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a

new battery.

•

Use only with the battery charger specified by the manufacturer.

•

Ensure that the battery charger electrical cord is not subjected to damage or stress. Do not operate the

battery charger if it has a damaged electrical cord or plug.

•

Do not use the charger in wet areas or expose it to rain or water.

•

The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500 charge cycles,

whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully

recharged again.

•

Explosion hazard – protect the battery against heat, for example, direct sunlight and fire. Do not store

batteries in vehicles or locations subject to heat.

•

Batteries can explode in the presence of an ignition source, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product in the presence of open ﬂame. Exploding batteries

can propel debris and chemicals.

•

Do not open the battery – danger of short-circuiting and/or explosion.

•

Do not attempt to destroy or disassemble the battery pack or remove any of its components.

•

Do not touch the battery terminals with metal objects and/or body parts as short-circuit and/or personal injury

may result.

•

Explosion hazard – do not open and/or short-circuit the battery.

•

Poison hazard – battery leakage (liquid ejection). Under extreme conditions, liquid may be ejected from the

battery – avoid contact. If contact accidentally occurs, immediately seek medical attention, and flush with

water. If liquid contacts eyes, immediately seek medical attention, flush with clean water for at least 10

minutes. Liquid ejected from the battery may cause irritation or burns.

•

Dispose of non-serviceable batteries in an environmentally responsible manner and according to local

regulations.

Failure to adhere to the requirements above may result in the battery becoming inoperative or battery life being

reduced. In extreme cases or abuse, battery overheating, or fire may result.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

Maintenance

The Golden Rules for Care

WARNING! Release the trigger switch (9) and wait for all parts to come to a complete stop, then remove

the battery pack (22) before carrying out any checking, cleaning, or maintenance tasks.

•

Keep the machine clean. Remove debris after each use and before storage.

•

Regular and proper cleaning helps ensure safe operation and prolongs the life of the machine.

•

Inspect the machine before each use for worn and damaged parts. Do not operate it if any parts are found to

be defective or worn. Replace worn parts as necessary or contact an authorised service centre for repairs

before using the machine again.

WARNING! Only perform repairs and maintenance work according to these instructions! All further work

must be performed by a qualified specialist!

General Cleaning

NOTE: Do not use chemical, alkaline, abrasive, or other aggressive detergents or disinfectants to clean

this machine, as they may damage its surfaces.

Cleaning the Housing

•

Use a damp, lint-free cloth to clean the housing of the machine.

•

Do not immerse the machine in water or any liquids.

•

Remove stubborn dust with high-pressure air (max. 3 bar).

•

Clean the air vents (6) with a soft brush. Clogged air vents (6) can cause the motor to overheat.

•

Wipe the surface with a dry cloth afterwards.

Cleaning the Saw Chain

•

Use a soft plastic brush to clean the saw chain (2) of dirt.

•

Use a resin solvent (not provided) to clean the saw chain (2). Follow the resin solvent manufacturer's

instructions before proceeding.

•

To protect the saw chain (2) from rust and oxidation, lubricate it with special saw chain oil (not provided).

Cleaning the Guide Bar

•

Disassemble the guide bar (3) and saw chain (2) in the reverse order of assembly.

•

Remove any dirt accumulated inside the guide bar slot using a putty knife (not provided).

•

Use a damp, lint-free cloth to clean the surface.

•

Wipe the surface with a dry cloth afterwards.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

Maintenance Table

Inspect and maintain this machine regularly based on below maintenance table.

Part Task

Before/after

each use

Every 5 hours

of operation

Saw Chain

check x

lubricate x

clean x

sharpen whenever necessary

replace whenever necessary

Guide Bar

check x

lubricate x

clean x

replace whenever necessary

Drive Sprocket

check x

replace

every 5 hours of operation or

whenever necessary

Guide Bar and Saw Chain Maintenance

Most guide bar problems can be prevented by keeping the machine well maintained. Incorrect filing and non-

standard cutter and depth gauge settings are the primary causes of most guide bar problems, often resulting in

uneven bar wear. As the bar wears unevenly, the rails widen, which may cause the chain to clatter and make it

difficult to complete straight cuts. Insufficient lubrication of the guide bar and operating the machine with a saw

chain that is too tight can also contribute to rapid bar wear. To help minimise bar wear, regular maintenance of

both the guide bar and saw chain is recommended.

1. Disassemble the guide bar (3) and saw chain (2) in reverse order from the assembly process.

2. Regularly check the condition of the drive sprocket (16). If it is worn or damaged due to strain, have it

replaced by an authorised service agent. Do not mount a new saw chain onto a worn drive sprocket.

3. Clear residue from the rails on the guide bar (3) using a screwdriver, putty knife, wire brush, or a similar tool.

This will keep the oil passages open, ensuring proper lubrication of the guide bar (3) and saw chain (2) (Fig.

16).

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

4. Check the guide bar "rail" for wear: Hold a ruler (straight edge) against the side of the guide bar (3) and the

"cutter side plates." If there is a gap between the ruler and the guide bar (3), the guide bar "rail" is in normal

condition. If there is no gap (i.e., the ruler is flush against the side of the guide bar (3)), the guide bar "rail" is

worn and needs to be replaced with a new one of the same type (Fig. 17).

5. Check the saw chain (2) for possible wear and damage. Replace it with a new one if required. Experienced

users can sharpen a dull saw chain (see the "Saw Chain Sharpening" chapter below).

Saw Chain Sharpening

NOTE: Never saw with a blunt chain. The saw chain is blunt if you have to push the machine into the

tree, and the chips are very small.

1. Have the saw chain (2) sharpened professionally at an authorised service centre, or sharpen the chain

yourself using a proper sharpening kit. Follow the sharpening instructions provided with the sharpening kit.

WARNING! Only sharpen the saw chain (2) yourself if you are trained and experienced! Use proper

tools to sharpen the saw chain (2)!

2. The height difference between the tooth and the ridge is the cutting depth. When sharpening the saw chain

(2), consider the following points (Fig. 18):

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

− File angle

− Cutting angle

− File position

− Diameter of round file

− File depth

3. To sharpen the chain, proceed as follows:

− Use protective gloves.

− Ensure the chain is correctly tensioned.

− Engage the chain brake to lock the chain on the bar.

4. Use a chain file with a diameter 1.1 times the cutting tooth depth. Ensure that 20% of the file diameter is

above the cutter’s top plate.

5. File at an angle perpendicular to the bar, and at a 25° angle to the direction of travel (Fig. 19).

6. File each tooth from the inside towards the outside only. File one side of the chain first, then turn the saw

around and repeat the process on the other side.

7. Sharpen each tooth equally by using the same number of strokes.

8. Keep all cutter lengths equal. Check the safety depth gauge height every 5 sharpenings. If the depth gauges

are also trimmed, it is essential to restore the original profile.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

9. Use a depth gauge measuring instrument to check the height of the depth gauge. Depth gauge measuring

jigs are available from most reputable tool merchants (Fig. 20).

Repair

This machine does not contain any parts that can be repaired by the consumer. Contact an authorised service

centre or a similarly qualified person to have it checked and repaired.

Storage

•

Clean the machine as described above.

•

Attach the guide bar cover (20) to the guide bar (3).

•

Store the machine in a dry, frost-free, well-ventilated place.

•

Always store the machine in a place that is inaccessible to children. The ideal storage temperature is

between 10°C and 30°C.

•

We recommend using the original packaging for storage or covering the machine with a suitable cloth or

enclosure to protect it against dust.

Transportation

•

Attach the guide bar cover (20) to the guide bar (3).

•

Secure the machine against slipping when transporting it in a vehicle.

•

Protect the machine from heavy impacts or strong vibrations during transportation.

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

Troubleshooting

Suspected malfunctions are often due to causes that users can fix themselves. Therefore, check the machine

using this section. In most cases, the problem can be solved quickly.

WARNING! Only perform the steps described within these instructions! All further inspection,

maintenance, and repair work must be performed by an authorised service centre or a similarly qualified

specialist if you cannot solve the problem yourself!

Problem Possible Cause Solution

Machine does not start

Battery pack is not properly attached Attach properly

Battery pack is discharged Remove and charge battery pack

Battery pack is too hot Remove and let it cool

Battery pack is damaged Check by a specialist electrician

Other electrical defect in the machine Check by a specialist electrician

Machine does not reach full

power

Battery pack capacity is too low Remove and charge battery pack

Air vents are blocked Clean the air vents

Unsatisfactory cutting result

Saw chain is not tensioned properly Tension properly

Saw chain is dull or damaged Sharpen or replace the saw chain

Saw chain is not oiled Oil the saw chain and drive sprocket

Machine suddenly stops

Battery pack is discharged Remove and charge battery pack

Battery pack is too hot Remove and let it cool

Saw chain is blocked Remove the blockage

Excessive vibration or noise

Saw chain is dull or damaged Sharpen or replace the saw chain

Bolts/nuts are loose Tighten the bolts/nuts

Chain oil is incorrect Use correct oil

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

SW1 Chainsaw (Skin)

Specifications

Power Type Battery (sold separately)

Bar Length 5 inch

Max Branch Diameter 120mm

Chain Speed 5 metres per second

Noise Level 97dB

Chain Gauge .043

Chain Link 31 Links

Chain Pitch 0.5"

Battery Type Compatible with Baumr-AG 20V SYNC

Note: Requires minimal assembly

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

MR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

BAUMR-AG SW1 Cordless Mini Chainsaw Battery Powered Lightweight Efficient Tree Pruner CHNHCSBMSW1A

Product's Documents

Product manual

Specifications

BAUMR-AG CHNHCSBMSW1A Questions and Answers