3 GUN CABINET, DUAL KEY LOCK
3 GUN CABINET WITH AMMO SAFE
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! This gun cabinet is heavy and care should be exercised in transit and handling to ensure that no one is injured.
9 For maximum security, the gun cabinet must be securely xed to a oor and/or wall. At all times, and should be positioned on a level
oor/surface.
8 DO NOT install in areas where damp and condensation are present.
2. INTRODUCTION
Features three gun capacity, suitable for ries and shotguns. Two high security seven lever locks, supplied with two keys per lock.
Built to comply with BS7558. Fitted with high density foam gun divider and soft oor mat to prevent any damage to stored guns.
Manufactured with thick steel walls and door with a powder coated nish. Supplied with a set of xings to secure the cabinet in place.
3. SPECIFICATION
4. UNPACKING AND INSTALLATION
4.1. Carefully remove all parts from the packaging.
4.2. Verify that all components are included:
- Gun cabinet body.
- Locking mechanism (keys).
- Mounting hardware.
- User manual.
4.3. INSTALLATION INSTRUCTIONS (g.1)
4.3.1. Choose a location that is dry and secure.
4.3.2. Position the cabinet against a solid wall or oor.
4.3.3. Use the provided mounting hardware or other suitable hardware to anchor the cabinet
to the wall or oor.
4.3.4. Ensure the cabinet is level and does not wobble.
4.3.5. Double-check the installation for stability before use.
4.4. LOCKING AND UNLOCKING MECHANISM
4.4.1. Insert the key and turn clockwise to unlock.
4.4.2. To lock, close the door and turn the key counterclockwise.
5. MAINTENANCE
5.1. Periodically check locks and hinges for smooth operation.
5.2. Wipe down the interior and exterior with a dry or slightly damp cloth.
5.3. Lubricate lock mechanisms as needed.
5.4. Inspect the cabinet for rust or damage and address any issues immediately.
5.5. STORAGE GUIDELINES
5.6. Arrange rearms with muzzles pointing upward or downward, never sideways.
8 DO NOT overcrowd the cabinet; this may damage rearms or prevent proper door
closure.
5.7. If storing ammunition, keep it in a separate, secured compartment.
5.8. Use silicone-treated gun socks or desiccants to reduce moisture build up.
SKS04
SGS3 SGS3AB Issue 1 14/02/25
Original Language Version
© Jack Sealey Limited
Refer to
instructions
MODEL NO: SGS3, SGS3AB
Model No: SGS3 SGS3AB
Gun Capacity: 3 3
External Dimensions (W x D x H): 245 x 205 x 1255mm 245 x 205 x 1450mm
Internal Dimensions (W x D x H): 240 x 175 x 1250mm 240 x 175 x1265mm
Nett Weight: 24.5kg 29kg
g.1
SGS3 SGS3AB
Parts support is available for this product. To obtain parts, please log on to
www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
REGISTER YOUR
PURCHASE HERE
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Original Language Version
© Jack Sealey Limited
SGS3 SGS3AB Issue 1 14/02/25
