Jet-USA PRWELEJT40HA RX540s High Pressure Washer 2900PSI User Manual

User Manual

[Revision 5.0]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND MAY

VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in appearance,

assembly, inclusions, specifications, description, and packaging.

RX540S Electric Pressure Washer

E&OE © Jet-USA 2

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Wor

k areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear

appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

• P

etrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• U

sing a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

• K

eep packaging away from children and

pets, potential risk of suffocation or

choking.

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

E&OE © Jet-USA 3

General Electrical Safety

• I

nspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• E

lectrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• T

he equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Child Choking Hazard!

• W

ARNING: CHOKING HAZARD - CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT

SUPERVISION REQUIRED.

• Carefully inspect anything a baby or child could gain access to, including this product & packaging.

• Dangers include anything of a size that could become stuck or lodged in a baby or child's airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys,

buttons, keys, and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces

of packaging, staples, tape etc.

• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

Electric Pressure Washer Safety

• T

he appliance has been designed solely for private use outdoors and not for commercial use. Keep this appliance away from heat, direct

sunlight, moisture and rain, ice and sharp edges.

• Do not allow anybody that has not been trained to use a pressure washer to operate the machine without first reading the instruction manual.

• WARNING: High-pressure washers must not be used by children or untrained persons.

• Before starting your machine, carefully check for defects. If you find any, do not start your machine and contact your local distributor.

• In particular, ensure that the electric cable insulation is in perfect condition and free of cracks. If the electric cable is damaged, an approved local

service centre must replace it.

• WARNING: High pressure jets can be dangerous if they are used incorrectly. The jet must not be directed towards persons, electrical equipment

connected to the mains or the appliance itself.

• WARNING: Do not use the appliance close to other people unless they are wearing protective clothing.

• CAUTION: Do not direct the jet towards yourself or other persons to clean clothing or shoes.

• Hold the lance firmly in your hands.

• The operator and persons within close proximity to the cleaning area must take necessary measures to protect themselves from dislodged debris

when in use.

• Wear protective gloves and clothing during use.

• WARNING: The appliance has been designed for use with a cleaning agent supplied or recommended by the manufacturer. Using other cleaning

products or chemical products may affect the safety of the appliance.

• WARNING: Disconnect the appliance from the power supply before carrying out any maintenance.

• CAUTION: To ensure the safety of the appliance, only use spare parts supplied or approved by the manufacturer.

• Do not use the appliance if the power cable or important parts of the appliance are damaged, for example, the safety device, high pressure hose

and handgun.

• Do not use the appliance with wet hands. If the appliance is damp or wet, unplug it immediately. Do not place it in water.

• The tyres and valves on the tyres can be damaged by the high-pressure jet and could burst.

• Never use the machine in an environment where there is a danger of explosion.

• It is forbidden to clean surfaces containing asbestos at high pressure.

• This high-pressure washer must not be used in temperatures below 0 ° C.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

E&OE © Jet-USA 4

• CAUTION - The hoses, accessories and high-pressure couplings are important for the safety of the machine. Only use hoses, accessories and

couplings recommended by the manufacturer.

• WARNING: Inadequate extension cables may be dangerous. Cables and spools must always be completely unwound to avoid letting the cable

overheat.

• If an extension cable is used, the plug and socket must be waterproof and conform to the requirements below regarding the length and

dimensions of the cable.

• 1,0 mm ² max. 12,5 m

• 1,5mm²max.20 m

• If the power cable is damaged, it must be replaced by the manufacturer, their service agent or a qualified professional in order to avoid any

danger.

• WARNING: This machine is not designed to be used by persons (including children) with reduced physical, sensory or mental capacities or

whose lack experience or knowledge.

• WARNING: It is advisable that you supervise children to ensure that they do not play with the appliance.

• CAUTION – Risk of explosion – do not spray flammable liquids, do not direct the jet towards flammable liquids.

• WARNING: Water that has circulated in the anti-back flow system is not considered drinkable.

• WARNING: Do not use the appliance if the power cable or important parts of the appliance are damaged, for example, the safety devices, high

pressure hoses and handgun.

• WARNING: If you have an extension cable, it must be waterproof.

• WARNING: When you switch on the machine, a recoil movement is produced due to the force of the water jet. Use two hands to control the

lance. Wear safety gloves when using the appliance. Wear suitable protective clothing.

• In case of accidental contact with detergent, wash with water. If the liquid comes into contact with the eyes, also seek medical assistance (the

detergent can cause irritations or burns).

• In the event that the appliance breaks down, do not attempt to repair it yourself but contact a professional technician to avoid any danger.

Main Power Connection

The following must be observed when connecting the high-pr

essure washer to the power supply:

• Connecting the electrical connection should be done by a qualified electrician conforming to 60364-1 CEI.

• It is recommended that the electrical supply to this machine should comprise a residual current device which interrupts the current if the leakage

current exceeds 30 mA for 30ms.

Connecting To the Water Network Warning

According to current guidelines, the unit must never be operated without a system separator on the potable water system. Use a EN 12729 type BA

s

ystem separator. Water that passes through a system separator is classified as non-potable.

WARNING: Always connect the system separator to the water supply and never directly to the device!

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

E&OE © Jet-USA 5

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

E&OE © Jet-USA 6

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Choking Hazard

Children under 8 yrs. Can choke

or suffocate on small parts. Adult

supervision required.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

E&OE © Jet-USA 7

Table of Contents

Safety ......................................................................................................................................................... 2

Safety Symbols ........................................................................................................................................................... 5

Parts Identification .................................................................................................................................... 8

First Time Instructions .............................................................................................................................. 9

Safety Devices ............................................................................................................................................................ 9

Thermal Sensor .......................................................................................................................................................... 9

Assembly ................................................................................................................................................. 10

Operation ................................................................................................................................................. 13

Purpose .................................................................................................................................................................... 13

Areas of Application .................................................................................................................................................. 13

Operating the Pressure Washer ............................................................................................................................... 13

Using the Nozzles ..................................................................................................................................................... 14

Working with Detergents .......................................................................................................................................... 15

Connecting the Trigger Attachments ........................................................................................................................ 16

Mounting the Patio Cleaner ...................................................................................................................................... 17

Rinsing With the Pressure Washer ........................................................................................................................... 18

Shutting Down .......................................................................................................................................................... 18

Storage ..................................................................................................................................................... 19

General Storage ....................................................................................................................................................... 19

Winterizing and Long-Term Storage ......................................................................................................................... 19

Maintenance ............................................................................................................................................. 20

Environmental protection .......................................................................................................................................... 20

Specifications .......................................................................................................................................... 21

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

E&OE © Jet-USA 8

Parts Identification

No. Name No. Name

1 High-pressure hose 10 Hose holder

2 Trigger (with safety lock) 11 Extension spray lance holder

3 High-pressure hose connection 12 Trigger gun holder

4

Button (for high-pressure hose

connection)

13 Plug

5 Trigger gun 14 -

6

Extension spray lance

15

-

7

Power cord holder

16

Wheel

8

On/Off switch

17

Turbo nozzle

9 Transportation handle

Spare parts available

for purchase, scan QR

code below:

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

E&OE © Jet-USA 9

First Time Instructions

This section will explain in detail how to make high pressure washer ready for use.

Safety Devices

•

The unloader valve can reduce pressure if it exceeds pre-set values.

•

Locking device on trigger gun: The trigger gun features a locking device. When the knob is activated, the

trigger gun cannot be operated.

Thermal Sensor

A thermal sensor protects the motor against overloading. The machine will restart after a few minutes when the

thermal sensor has cooled.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

E&OE © Jet-USA 10

Assembly

1. Position the washer as CLOSE as possible to the water supply.

2. The washer must be used on a secure and stable surface in a standing, upright position (Fig. 1).

3. Screw the transaction handle to the electric pressure washer unit (Fig. 2).

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

E&OE © Jet-USA 11

4. Insert the power cord holder (Fig. 3) and trigger gun holder (Fig. 4) into its position.

5. Screw the spray lance into the trigger gun and rotate it until the two parts are completely locked (Fig. 5).

6. Connect the high-pressure hose to the trigger gun and the water outlet (Fig. 6).

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

E&OE © Jet-USA 12

WARNING! Keep hose away from sharp objects. Bursting hoses may cause injury. Examine hoses

regularly and replace if damaged. Do not attempt to mend a damaged hose.

7. Make sure the motor switch is pushed to the OFF position before plugging the unit into the power outlet

(Fig.7).

8. Check that the electrical supply voltage and frequency (Volt/Hz) correspond to those specified on the

pressure washer rating plate. If the power supply is correct, you may now plug the pressure washer into the

power outlet (Fig. 8).

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

E&OE © Jet-USA 13

Operation

Purpose

This high-pressure electric power washer is intended for residential use to clean vehicles, machines, buildings,

facades, etc.

Areas of Application

•

Never use the machine in potentially explosive areas under any circumstances!

•

The operating temperature must be between 32ºF (0ºC) and 104ºF (40ºC).

•

The machine consists of an assembly with a pump, which is encased in a shock-absorbing housing. To

provide the operator with an optimal working position, the machine is equipped with a spray lance and a non-

slip handle grip, whose shape and configuration comply with applicable regulations.

•

Do not cover or modify the spray lance or the spray nozzles in any way.

•

The high-pressure electric power washer is designed to be used with cold water; higher temperatures can

damage the pump.

•

Do not use water that is dirty, gritty, or contains any chemical products, as these could impair operation and

shorten the life of the machine.

IMPORTANT! The equipment and packaging material are not toys. Do not let children play with plastic

bags, foils, or small parts. These items can be swallowed and pose a suffocation risk!

IMPORTANT! This pressure washer is equipped with a micro-switch sensitive to water flow. This Total

Stop System (TSS) senses water flow in the pump. When the trigger is released, water stops flowing

through the pump. The TSS then automatically turns the motor off to protect the pump from overheating,

thus saving energy and prolonging pump life.

WARNING! Do not connect to the power supply until assembly is complete. Failure to comply could

result in accidental starting and possible serious personal injury.

CAUTION! The trigger gun and lance are affected by a thrust during operation, therefore always hold it

firmly with both hands. Point the spray gun at the ground. Check that the machine is in an upright

position. Do not place the machine in high grass!

Operating the Pressure Washer

1. Turn the water supply tap on completely.

2. Release the trigger lock (Fig.9). Press the trigger for a few seconds until water flow is steady. This will allow

air to escape and discharge any residual pressure in the hose.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

3. Turn the switch to the ON position to start the pressure washer (Fig. 10).

Using the Nozzles

Using detergent nozzle to spray soap and use adjustable nozzle to wash.

CAUTION! NEVER change nozzles without locking the safety lock on the trigger handle.

WARNING! High-pressure jets can be dangerous if subject to misuse. The jet must not be directed at

persons, pets, live electrical equipment, or the appliance itself.

To connect a nozzle to the spray lance:

1. Turn off the pressure washer and shut off the water supply. Pull the trigger to release water pressure.

2. Engage the safety lock on the trigger handle by pushing right on the safety lock (Fig.9).

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

3. Snap the nozzle into the spray lance tight (Fig. 11).

To disconnect a nozzle from the spray lance once the cleaning job is complete:

4. Turn off the pressure washer and shut off the water supply. Pull the trigger to release water pressure.

5. Engage the safety lock on the trigger handle by pushing right on the safety lock (Fig.9).

6. Remove the nozzle from the spray lance.

WARNING! Do not make changes to the nozzle while the trigger is engaged. Doing so could result in

damage to the pressure washer or injury to the user.

Working with Detergents

When cleaning with the pressure washer, some cleaning tasks can be solved with water alone, but for most

tasks cleaning with detergent allows for more effective dirt removal.

WARNING! Use only detergents designed for Pressure Washers. DO NOT USE household detergents,

acids, alkaline solutions, bleaches, solvents, flammable material, or industrial grade solutions. These

could damage the pressure washer. Many detergents may require mixing prior to use. Prepare the

cleaning solution as instructed on the solution bottle.

1. Remove the cap from the detergent bottle and fill it with detergent designed specifically for use with pressure

washers (Fig. 12).

2. Install the Detergent Nozzle on the spray lance (Fig. 12).

CAUTION! Always test the detergent in an inconspicuous area before use.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

3. Turn on the pressure washer. Pull the trigger to operate the unit. The liquid detergent will automatically mix

with water and be discharged through the nozzle.

4. Apply detergent from the bottom to the top of the dry surface to be cleaned.

NOTE: Wetting the surface first is not recommended as it dilutes the detergent and reduces its

cleaning ability.

5. Allow the detergent to remain on the surface for a short time before rinsing. Do not allow the detergent to dry

on the surface.

CAUTION! Damage may occur to painted surfaces if the detergent is allowed to dry on the surface.

Wash and rinse a small section at a time. Avoid working on hot surfaces or in direct sunlight.

6. When you have finished using the detergent injection system, insert the bottle detergent with fresh water.

Siphon water at low-pressure for one minute to rinse the bottle until it is thoroughly cleaned.

CAUTION! Failure to follow these cleaning instructions will cause the injection system to become

clogged and inoperable.

Connecting the Trigger Attachments

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

Mounting the Patio Cleaner

1. Insert the extension lance into to the housing.

2. Fix the extension lance with the two screws to the housing.

3. Insert the rotor arm into the extension lance.

4. Insert the U-pin to fix the rotor arm.

NOTE: Make sure the rotor arm is properly fixed to the extension lance with the U-pin.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

Rinsing With the Pressure Washer

1. Turn off the pressure washer and shut off the water supply.

2. Pull the trigger to release water pressure.

3. Engage the safety lock on the trigger handle by pushing right on the safety lock (Fig.9)

4. Remove the nozzle from the spray lance.

NOTE: When using detergent, make sure that the Detergent Nozzle is installed.

5. Start at the top of the area to be rinsed and work down, making sure to overlap the strokes.

IMPORTANT! NEVER USE:

•

Bleach, chlorine products, and other corrosive chemicals

•

Liquids containing solvents (e.g., paint thinners, gasoline, oils)

•

Tri-sodium phosphate products

•

Ammonia products

•

Acid-based products

These chemicals will harm the unit and will damage the cleaning surface.

Shutting Down

1. Turn the switch to the OFF position and unplug the power cord from the outlet.

2. Turn off the water source.

3. Hold the trigger to release water pressure.

4. Disconnect the high-pressure hose connection on the trigger gun handle.

5. Release the trigger and engage the gun safety lock.

WARNING! Turn off the water supply and squeeze the trigger to depressurize the unit. Failure to do so

could result in personal injury due to discharge of high-pressure water.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

Storage

General Storage

1. Store the trigger gun and spray lance on the holders (12).

2. Hang the power cord on (7) and high-pressure hose on (10).

CAUTION! Always store your pressure washer in a location where the temperature will not fall below

32ºF (0ºC). The pump in this machine is susceptible to permanent damage if it freezes. FREEZE

DAMAGE IS NOT COVERED BY THE WARRANTY.

•

Store the pressure washer indoors in a dry, covered area where it is not subject to adverse weather

conditions.

•

It is important to store this product in a frost-free area.

•

Always empty water from all hoses, the pump, and the detergent bottle before storing.

Winterizing and Long-Term Storage

If you must store your pressure washer in a location where the temperature falls below 32ºF (0ºC), you can

minimize the chance of damage to your machine by utilizing the following procedure:

1. Disconnect all water connections.

2. Turn on the machine for a few seconds until the remaining water in the pump exits. Turn off immediately.

3. Do not allow the high-pressure hose to become kinked.

4. Store the machine and accessories in a room that does not reach freezing temperatures.

5. Do not store near a furnace or other sources of heat that may dry out the pump seals.

6. Operate the pressure washer with non-corrosive/non-toxic anti-freeze, a pump saver, or a pump protector

before storing for the winter.

WARNING! Before reusing, completely flush the unit out with clear water. Anti-freeze products can

damage paintwork, so you must ensure there is no anti-freeze left in the system before using it again.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

Maintenance

CAUTION! Before working on the pressure washer, disconnect the plug from the power supply socket.

1. Clean the nozzle with the needle clean out tool provided (Fig. 14). Remove the spray lance from the gun;

remove any dirt from the nozzle hole and rinse.

2. Remove additional debris by back flushing water through the nozzle and spray lance. To do this, place the

end of your garden hose (with water running) to the tip of the nozzle, pushing water and debris out of the

back opening of the nozzle and spray lance.

3. Keep the machine clean and let cooling air pass freely through the machine vents.

4. To ensure an easy connection and that O-rings do not dry up; the couplings should be greased regularly.

Environmental protection

Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old

appliances. Please dispose your old appliances using appropriate collection systems.

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

RX540S Electric Pressure Washer

Specifications

Voltage 240V / 50Hz

Maximum Pressure 2900PSI

Max Flow Rate 6.8L/min

Rated Flow Rate 5.8L/min

Max Water Temp

50℃

Hose Length 5m

Power Cord Length 5m

Power Plug Australian Standard

Certificates/Approvals GS/CE, RoHS, SAA (power plug)

JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA JET USA

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

Jet-USA PRWELEJT40HA RX540s High Pressure Washer 2900PSI

Product's Documents

Product manual

Specifications

Jet-USA PRWELEJT40HA Questions and Answers