Loading ...
Loading ...
Loading ...
Folding the Handle
WARNING
Folding or unfolding the handle improperly can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or unfolding the handle.
• If a cable is damaged, contact an Authorized Service Dealer.
1. Remove the electric-start button (if equipped) as shown in A of
Figure 21.
2. Remove and save the 2 handle knobs and 2 carriage bolts from the handle brackets (B of
Figure 21).
Important: Route the cables to the outside of the handle knobs as you fold the handle.
3. Fold the handle by rotating it forward (C of Figure 21).
4. Loosely install the handle knobs and carriage bolts on the handle brackets (D of
Figure 21).
5. To unfold the handle, refer to
1 Assembling and Unfolding the Handle (page 6).
g334159
Figure 21
20
Loading ...
Loading ...
Loading ...