Loading ...
Loading ...
Loading ...
en Cleaning and maintenance
44
:Warning
Risk of electric shock/material
damage/damage to the appliance!
If moisture penetrates the appliance,
this may cause it to short circuit.
Do not use a pressure washer, steam
cleaner, hose or spray gun to clean
your appliance.
Caution!
Material damage/damage to the
appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the appliance. Therefore
please note:
■ Do not allow these agents to come
into contact with the surfaces of the
appliance.
■ Clean the appliance with nothing but
water and a soft, damp cloth.
■ Remove any detergent, spray or
other residues immediately.
Cleaning the base unit
This appliance is equipped with
automatic self-cleaning. Fluff from the
laundry does not have to be removed
after each use – it is collected in the
base unit.
In order to not adversely affect the
operation of the appliance, you must
clean the base unit (fluff collector and
fluff filter) only in the following cases:
■ The following message appears in
the display: õ
■ Before running the appliance care
programme.
As an option, you can clean the
appliance's base unit at any time.
Note: Allow the appliance to cool down
for approximately 30 minutes after use
before commencing cleaning.
Clean the base unit as follows:
1. Open the maintenance flap by the
handle.
2. Unlock the levers on the heat
exchanger cover.
3. Pull the heat exchanger cover out by
its grip.
Loading ...
Loading ...
Loading ...