Loading ...
Loading ...
Loading ...
6
* Based on “Kitchen Firesafety Tips” published by NFPA.
Installation
z
This product is not intended for connection to a rigid metal conduit.
z
The appliance must be able to be disconnected from mains supply after installation.
This may be done with a wiring switch in accordance with the wiring rules.
z
CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal-cutout,
this appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by the utility.
z
Ensure that any applicable regulations concerning the discharge of exhaust air are
adhered to.
z
Consult a qualified electrician if the grounding instructions are not completely
understood, or if doubt exists as to whether the appliance is properly grounded.
z
Exhaust air must not be discharged into an existing flue that is used for exhausting
fumes from appliances burning gas or other fuels.
z
WARNING: Failure to install the screws or fixing device in accordance with these
instructions may result in electrical hazards.
z
Ensure the glass perimeter plate can open freely without obstruction at all times.
Maintenance
z
Unplug or disconnect the appliance from the power supply before servicing or cleaning.
z
There is a risk of fire if cleaning is not carried out in accordance with the instructions in
your user guide.
SAFETY AND WARNINGS
Loading ...
Loading ...
Loading ...