John Deere S170 User Manual

Loading ...

Removing and Installing Front Wheel Assembly

Removing:

1. Park machine safely. (See Parking Safely in the Safety section.)

CAUTION: Avoid injury! The machine can fall or slip from an

unsafe lifting device or supports.

● Use a safe lifting device rated for the load to be lifted.

● Lower machine onto jackstands or other stable supports

and block wheels before servicing.

IMPORTANT: Avoid damage! Place jackstands under frame, not

under transmission or engine, when raising or supporting

machine.

APY36184—UN—10JUL20

2. Safely lift and support machine. Place safe lifting device under end

of front hanger bracket at location (A), and place jackstands or

other stable supports under frame on each side at location (B).

Block wheels remaining on the ground to prevent machine

movement.

GXAL42052—UN—04MAR13

3. Remove plastic cap (C) from end of wheel hub.

CAUTION: Avoid injury! Components are installed under

spring tension. Wear eye protection and use proper tools

when installing and removing components with spring

tension.

GXAL42053—UN—04MAR13

4. Remove snap ring (D) from end of axle.

5. Remove washer (E) and wheel from axle.

CAUTION: Avoid injury! Explosive separation of tire and rim

parts is possible when they are serviced incorrectly:

● Do not attempt to mount a tire without the proper

equipment and experience to perform the job.

6. Take wheel assembly to an authorized service dealer for repairs.

Installing

1. Grease spindles and wheel hub grease ttings with specied

grease.

2. Install wheel and washer (E) on axle.

3. Install snap ring (D).

4. Install plastic cap (C).

5. Safely remove jackstands and lower machine.

SR99263,00002B1-19-03JUL20

Removing and Installing Rear Wheel Assembly

Removing