Loading ...
Loading ...
Loading ...
11
For touch control model:
Select power level by touching the MINUS (2) or PLUS (3).
For slider touch model:
touch the slider to the level you want to set.
• If you don’t choose a heat setting within 1 minute, the
hob will automatically switch off. You will need to start
again at step 1.
• You can modify the heat setting at any time during
cooking.
If the display flashes alternately with the heat setting (for induction hob)
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
3.3.2 Finish cooking
Touching the heating zone selection control that you wish to
switch off.
For touch control model:
Turn the cooking zone off by touching the MINUS (2) to “0”.
For slider touch model:
Touch the slider to “0”.
NOTE: make sure the display shows “0”.
Turn the whole cooktop off by touching the ON/OFF control.
Beware of hot surfaces
H will show which cooking zone is hot to touch. It will disappear
when the surface has cooled down to a safe temperature. It can
also be used as an energy saving function if you want to heat
further pans, use the hotplate that is still hot.
3.3.3 Using the Boost function (for induction hob)
Activate the boost function
Select the zone with Booster, then touching the BOOST key
(7), the zone indicator shows “P” and the power reach Max.
Loading ...
Loading ...
Loading ...