1. INTRODUCTION
Highest cut resistance - (Cut Level C) provides maximum protection against cuts and abrasions. Polyurethane-coated palm for
improved grip. The whole liner is cut resistant, including the back of the glove. CE Marked and conforms to BS EN 388:2016 4-4-4-3-C.
Notied body No: 0075
Certicate number: 0075/1022/162/10/18/2340
Carried out by: CTC Groupe
2. SAFETY
9 Ensure the glove is suitable for the task at hand.
9 Before use, the glove shall be visually controlled. In case of deterioration the gloves must be scrapped (abrasion, cut, tear, puncture).
8 DO NOT wear these gloves when there is a risk of entanglement by moving parts of machines.
9 For multilayer gloves that can be separated, the performance levels are only applicable to the whole glove, including all layers.
3. PERFORMANCE
Mechanical Hazard
EN 388
4443C
Abrasion Resistance 4
Blade Cut Resistance 4
Tear Resistance 4
Puncture Resistance 3
Cut Resistance C
4. INSTRUCTIONS FOR USE
4.1. Place glove over hand tting the thumb and ngers in the appropriate positions making sure the glove is tted comfortably to carry out
the task at hand.
4.2. Remove by pulling the glove upward from the ngers.
5. MAINTENANCE
9 The packaging provided with the glove is suitable for transport.
9 Inspect gloves for damage before wearing them. Replace the gloves if worn or damaged.
6. STORAGE
The design performance is not signicantly aected by aging when stored in appropriate conditions (humidity, temperature, clean, ventilated,
light).
9139L 9139XL Issue 1 04/12/23
Original Language Version
© Jack Sealey Limited
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective
Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
ANTI-CUT PU GLOVES (CUT LEVEL C -
LARGE/EXTRA LARGE) - PAIR
MODEL NO: 9139L 9139XL
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any uids (if applicable) into approved
containers and dispose of the product and uids according to local regulations.
REFER TO INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
The numbers indicate the performance level of the glove.
1 = lowest 4 = highest 5 highest for blade cut resistance.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
