GENPOWER GENPSTGN1M2A 1200W Portable Power Station User Manual

PS1200 Power System

User Manual

[Revision 1.0]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND

MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description, and packaging.

THE BATTERY MAY HAVE SOME CHARGE ON ARRIVAL, IT IS IMPORTANT

HOWEVER THAT THE BATTERY IS CHARGED PRIOR TO USE.

PS1200 Power System

E&OE © GenPower 2

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Wor

k areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear

appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

• P

etrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well-ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• U

sing a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

• K

eep packaging away from children and

pets, potential risk of suffocation or

choking.

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 3

General Electrical Safety

• I

nspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• E

lectrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• T

he equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Child Choking Hazard!

• W

ARNING: CHOKING HAZARD - CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT

SUPERVISION REQUIRED.

• Carefully inspect anything a baby or child could gain access to, including this product & packaging.

• Dangers include anything of a size that could become stuck or lodged in a baby or child's airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys,

buttons, keys, and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces

of packaging, staples, tape etc.

• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

Safety Introduction

• CAUT

ION! BEFORE USING OUR POWER STATION, PLEASE READ THIS MANUAL CAREFULLY TO UNDERSTAND THE PROPER USE

OF YOUR UNIT. KEEP THIS MANUAL HANDY.

• In accordance with the applicable product liability laws, the manufacturer of this product assumes no liability for damage to the product or

damage caused by the product arising from:

• Improper handling

• Failure to comply with the operating instructions

• Repairs carried out by unauthorised third parties or specialists

• Installing and replacing non-original spare parts

• Application other than specified

• Failure of the electrical system if the electrical regulations and VDE provisions 0100, DIN 57113 / VDE0113 are not observed

• Read through the complete text in the operating manual before installing and commissioning the device. This operating manual should help you

familiarise yourself with your product and use it for its intended purpose.

• The operating manual includes important instructions for the safe, proper, and economical operation of the product, for avoiding danger,

minimising repair costs and downtimes, and increasing the reliability and extending the service life of the product.

• In addition to the safety instructions in this operating manual, you must also observe the regulations applicable to the operation of the product in

your country. Keep the operating manual package with the power tool at all times and store it in a plastic cover to protect it from dirt and moisture.

It must be read and carefully observed by all operating personnel before starting work.

• The product may only be used by personnel who have been trained to use it and who have been instructed about the associated hazards. The

required minimum age must be observed.

• In addition to the safety instructions in this operating manual and the separate regulations of your country, the generally recognised technical

rules relating to the operation of such machines must also be observed. We accept no liability for accidents or damage that occur due to a failure

to observe this manual and the safety instructions.

Proper Use

• T

he power station is designed to charge rechargeable batteries or operate electronic products that do not exceed a maximum power of 1200 W.

• The product may only be used in the intended manner. Any use beyond this is improper. The user/operator, not the manufacturer, is responsible

for damages or injuries of any type resulting from this.

• An element of the intended use is also the observance of the safety instructions, as well as the assembly instructions and operating information in

the operating manual. Persons who operate and maintain the machine must be familiar with it and must be informed about potential dangers.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 4

• In addition, the applicable accident prevention regulations must be strictly observed. Other general occupational health and safety-related rules

and regulations must be observed.

• The liability of the manufacturer and resulting damages are excluded in the event of modifications to the product.

• The product may only be operated with original parts and original accessories from the manufacturer. The safety, operating, and maintenance

specifications of the manufacturer, as well as the dimensions specified in the technical data, must be observed.

• Please note that our products were not designed with the intention of use for commercial or industrial purposes. We assume no guarantee if the

product is used in commercial or industrial applications, or for equivalent work.

Power Station Safety Instructions

• DANG

ER! FAILURE TO OBSERVE THESE INSTRUCTIONS POSES AN EXTREME DANGER OF DEATH OR THE RISK OF LIFE-

THREATENING INJURIES.

• NOTE: Personal injury or property damage can result from incorrect operation.

DANGER!

• P

lease do not disassemble, repair, or modify the product, as this may cause electric shock, heat, fire, and other dangers.

• Do not place the product near a source of fire or expose it to fire or heat, as this could result in fire, burns, and other hazards.

• Equipment or accessories connected to the USB must comply with the standard EN62368-1.

• This product cannot be charged or used in damp environments such as in dew, bathhouses, or rain. Do not use water to clean the product, as it

will cause electric shock, heat, fire, and other dangers.

• Do not touch this product or the connector plug when your hands are wet. It may cause an electric shock hazard.

• Do not use metal to contact the AC output interface. It may cause electric shock, heat, fire, and other dangers.

• Please do not dispose of the product in general waste disposal. Electric shock, heat, and fire may occur in the garbage collection truck.

• Do not use AC connections other than those specified. It may cause electric shock, heat, fire, and other hazards.

• Please check the rated specifications of the connection interface or the connection product and do not exceed the specifications. It may cause

electric shock, heat, fire, and other hazards.

• Do not subject the product to strong impacts such as dropping or striking with a hammer. This can result in electric shock, heating, fire, or

damage to the product.

• Do not place, store, or use the product in locations where it can fall or drop (e.g., on high shelves). This can result in electric shock, heating, fire,

or damage to the product.

• Do not move the product while it is charging or in use. Heating, fire, electric shock, or damage can be caused to the product due to vibrations or

impacts while moving.

• When in use, ensure that the connected product is reliably grounded. Improperly grounded devices may pose a serious threat to your life and

property.

WARNING!

• P

lease keep the place clean for use and storage. Powder or small metal contact at the terminal may cause short circuit, smoke, or fire.

• Make sure to check the product before use. In case of anomalies such as breakages, cracks, leaks, heating, or breakage of the AC power line,

stop using the product immediately.

• Do not let children use this product, as it may cause accidents or injuries.

• Do not use if a connector cannot be fully inserted due to a loose or deformed interface. Otherwise, electric shocks, heating, and fire can occur.

• Please do not use it on the beach or in dusty places, as this may cause smoke or fire.

• Do not use or store in a car, trunk, loading table, or high-temperature place under direct sunlight. Otherwise, it may cause product failure,

obstacles, or deterioration, or cause heating.

• If the liquid within the product adheres to the skin or clothing, wash with water immediately. Otherwise, it may cause skin injury. If the liquid gets

into the eyes, rinse with clean water and see a doctor immediately. It may cause the risk of blindness.

• In the event of a thunderstorm or lightning strike, unplug the power cord from the socket while charging. Overload can lead to overheating, fire,

and other accidents.

• Charge the product within the specified voltage range (100-240 V alternating current). Otherwise, heat, fire, and other accidents may result.

• Do not place the product upside down or on its side when using or storing it, as this may cause leakage, heat, fire, and other hazards.

NOTE

• S

top using the product immediately if any abnormalities such as rust, unusual smell, heating, etc., appear.

• When transporting the product by car, etc., please secure it so that it cannot move. Otherwise, the product may be damaged, resulting in electric

shock, heat, fire, etc.

• Do not allow this product or the power cord to come into contact with water or other liquids. This may lead to short circuits, heat, fire, etc.

• Charge, use, and store this product at temperatures between 0 and 40°C; otherwise, loss of power or heating may occur.

• In the event of an accidental drop or impact, the housing could be damaged, leading to electric shock, heat, fire, etc. Please stop using the

product immediately. To avoid accidents, immediately contact the installation and maintenance personnel responsible on-site.

• Read through the operating instructions completely before connecting electrical products. Operating errors can lead to accidents or injuries.

• Before connecting electrical products, ensure that they are switched off. A sudden start of electrical products can result in accidents or injuries.

• Make sure to turn off the main switch during storage to avoid unnecessarily discharging the battery and to avoid electric shock.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 5

ATTENTION!

• T

his power tool generates an electromagnetic field during operation. This field can impair active or passive medical implants under certain

circumstances. To prevent the risk of serious or deadly injuries, we recommend that persons with medical implants consult with their physician

and the manufacturer of the medical implant before operating the machine.

Residual Risks

• T

he product has been built according to state-of-the-art and recognised technical safety rules. However, individual residual risks can arise during

operation.

• Health hazards due to electrical power, with the use of improper electrical connection cables.

• Furthermore, despite all precautions being taken, some non-obvious residual risks may still remain.

• Residual risks can be minimised if the "Safety Instructions" and the "Intended Use," together with the operating manual as a whole, are observed.

• Avoid accidental start-ups of the machine: The operating button must not be pressed when inserting the plug into a socket. Use the tool

recommended in this operating manual to ensure your machine provides optimum performance.

Disposal and Recycling

• T

he packaging materials are recyclable. Please dispose of packaging in an environmentally friendly manner.

• Electrical and electronic appliances do not belong in household waste but should be collected and disposed of separately.

• Used batteries or rechargeable batteries that are not installed permanently in the old appliance must be removed non-destructively before

disposal. Their disposal is regulated by the battery act.

• Owners or users of electrical and electronic devices are legally obliged to return them after use.

• The end-user is responsible for deleting their personal data from the old device being disposed of!

• The symbol of the crossed-out dustbin means that waste electrical and electronic equipment must not be disposed of with household waste.

• Waste electrical and electronic equipment can be handed in free of charge at the following places:

• Public disposal or collection points (e.g. municipal works yards)

• Points of sale of electrical appliances (stationary and online), provided that dealers are obliged to take them back or offer to do so voluntarily.

• Up to three waste electrical devices per type of device, with an edge length of no more than 25 centimetres, can be returned free of charge to

the manufacturer without prior purchase of a new device from the manufacturer or taken to another authorised collection point in your vicinity.

• For additional take-back conditions of the manufacturers and distributors, please contact the respective customer service.

• In the case of delivery of a new electrical device by the manufacturer to a private household, the latter may arrange for the free collection of the

old electrical device upon request from the end-user. Get in contact with the manufacturer’s customer service.

• These statements only apply to devices installed and sold in the countries of the European Union and which are subject to the European

Directive 2012/19/EU. Different provisions may apply to the disposal of electrical and electronic appliances in countries outside the European

Union.

Information on the Battery Act [BattG]

• U

sed batteries and rechargeable batteries do not belong in household waste but should be collected and disposed of separately.

• For the safe removal of batteries or rechargeable batteries from the electrical device and for information on their type or chemical system, please

refer to the additional information in the operating or assembly instructions.

• Owners or users of batteries and rechargeable batteries are legally obliged to return them after use. The return is limited to household quantities.

• Used batteries may contain pollutants or heavy metals that can harm the environment or human health. Recycling used batteries and using the

resources they contain helps to protect these two important issues.

• The symbol of the crossed-out dustbin means that batteries and rechargeable batteries must not be disposed of with household waste.

• If the signs Hg, Cd, or Pb are also located below the dustbin symbol, this stands for the following:

• Hg: Battery contains more than 0.0005% mercury

• Cd: Battery contains more than 0.002% cadmium

• Pb: Battery contains more than 0.004% lead

• Rechargeable batteries and batteries can be returned free of charge to the following places:

• Public disposal or collection points (e.g. municipal works yards)

• Sales points for batteries and rechargeable batteries

• Take-back points of the common take-back system for old device batteries

• Take-back point of the manufacturer (if not a member of the common take-back system)

• These statements are only valid for rechargeable batteries and batteries sold in the countries of the European Union and subject to the European

Directive 2006/66/EC. Different provisions can apply to the disposal of rechargeable batteries and batteries in countries outside the European

Union.

Removing the Battery Before Disposing of the Device

• T

he integrated battery must be removed and disposed of separately in an environmentally friendly manner before disposing of the device.

• Mask off the contacts and package the battery such that it cannot move in the packaging.

• Please also observe any further national regulations.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 6

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 7

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Choking Hazard

Children under 8 yrs. Can choke

or suffocate on small parts. Adult

supervision required.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 8

Table of Contents

Safety ......................................................................................................................................................... 2

Safety Symbols ........................................................................................................................................................... 6

Front Panel ............................................................................................................................................... 10

Operation ................................................................................................................................................. 11

Unpacking ................................................................................................................................................................. 11

LCD Display .............................................................................................................................................................. 11

Switching the Product On and Off ............................................................................................................................ 13

Switching On: ..................................................................................................................................................... 13

Switching Off: ..................................................................................................................................................... 13

Charging ................................................................................................................................................................... 13

Charging with the Mains Power Unit .................................................................................................................. 13

Charging with a Solar Panel (not included)........................................................................................................ 14

Charging via the 12V Vehicle Output (Cigarette Lighter) in a Vehicle ............................................................... 14

Description of the Various Connections ................................................................................................................... 14

Start Up ..................................................................................................................................................................... 15

Preparation Before APP Connection (First-Time Connection) ................................................................................. 15

Bluetooth APP Operating Instructions ...................................................................................................................... 16

APP Interface Description .................................................................................................................................. 16

Bluetooth Connection Instructions ..................................................................................................................... 16

Select Connection Control Mode ....................................................................................................................... 18

WiFi Remote Control Mode ...................................................................................................................................... 20

Two Connection Modes Switch ................................................................................................................................ 21

Bluetooth Connection Switch / WiFi Remote Connection .................................................................................. 21

Display Illustration ..................................................................................................................................................... 21

Wi-Fi Icon Display .............................................................................................................................................. 21

Connection Success Display.............................................................................................................................. 22

SOC Display (Power Display) ............................................................................................................................ 22

Supplying the Consumer with Direct Current ........................................................................................................... 22

Supplying the Consumer with Alternating Current ................................................................................................... 23

Overload Protection .................................................................................................................................................. 23

Electrical Connection ................................................................................................................................................ 23

Damaged Electrical Connection Cable ..................................................................................................................... 23

Lithium Battery Care and Maintenance .................................................................................................. 25

Top 3 Battery Care Requirements ............................................................................................................................ 25

Maintenance, Storage, and Transport .................................................................................................... 27

Cleaning .................................................................................................................................................................... 27

Transport .................................................................................................................................................................. 27

Storage ..................................................................................................................................................................... 27

Maintenance ............................................................................................................................................................. 27

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 9

Repairs ..................................................................................................................................................................... 27

Troubleshooting ...................................................................................................................................... 28

Error Codes .............................................................................................................................................. 29

Specifications .......................................................................................................................................... 30

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 10

Front Panel

No. Name No. Name

1 Transport handles 11 USB 5V 2.4A output

2 LCD display 12 Wireless charging pad

3

DC switch

13

240V AC output

4

On/Off switch with operating display

14

Parallel interface

5

AC switch

15

Safety switch

6

Bluetooth/WIFI Switch (IOT Reset)

16

AC charging interface

7 12V vehicle output 17 DC charging interface

8 12V DC output 18 AC power cable

9

Type C output

19

Cigarette car socket cable

10

USB 12V 2A Fast Charge output

20

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 11

Operation

Unpacking

1. Open the packaging and carefully remove the product.

2. Remove the packaging material, as well as the packaging and transport safety devices (if present).

3. Check whether the scope of delivery is complete.

4. Check the product and accessory parts for transport damage. In the event of complaints, the carrier must be

informed immediately. Later claims will not be recognized.

5. If possible, keep the packaging until the expiry of the warranty period.

6. Familiarize yourself with the product by means of the operating manual before using it for the first time.

7. For accessories, as well as wearing parts and replacement parts, use only original parts.

ATTENTION! The product and the packaging material are not children’s toys! Do not let children play

with plastic bags, films, or small parts! There is a danger of choking or suffocating!

LCD Display

1 Battery level

The battery charge status is displayed in segments (0-10%, 11-20%, 21-30%, 31-

40%, 41-50%, 51-60%, 61-70%, 71-80%, 81-90%, 91-100%). In addition, the

charge status is shown as an exact percentage. When the power station is

charging, the segments rotate by the percentage.

2 Overload protection

In AC mode, if the rated power is exceeded for too long or the peak power is

exceeded, a warning sign with "overload" will appear.

3 Heat protection warning

The fan symbol switches on for cooling after some time in AC mode.

4 Cold protection warning

A thermometer with a snowflake is displayed if the power station becomes too

cold due to external influences.

5 Parallel icon

The parallel mode can only be displayed when there is no city power access, and

the AC button is triggered. The rest of the time, it is not displayed (the default is

turned off when starting).

6

Charging and

discharging time display

When the device is charging, the RECHARGE TIME icon is steady and displays

the corresponding remaining charging time. When the device is discharging, the

RECHARGE TIME icon is not displayed; only the remaining discharge time is

shown.

7

Voltage and frequency

display

When AC is turned on, the screen displays the corresponding output voltage level

and frequency.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 12

8 EPS

When the mains is connected and the AC output is on, the icon is always

displayed.

9 Wireless charging

If the device has this function, the icon is steady. If the device does not have this

function, the icon is not displayed.

10 Fan

When the inverter is loaded and the temperature of the inverter reaches ≥45±5℃,

the fan starts to work. When the inverter temperature is ≤40±5℃, the fan stops.

When the inverter is unloaded and the inverter temperature reaches ≥70±5℃, the

fan starts to work. When the inverter temperature is ≤65±5℃, the fan stops.

If the DC output power is higher than 100W, the fan needs to start.

11

Solar or DC charging

display

When a solar device or DC is charging the device, the icon is on.

12 Energy-saving mode

If you press the DC button for more than 10 seconds, the icon will be steady, and

the device will enter energy saving mode. If you press the DC button again, the

icon will disappear and the energy saving mode will close.

When the energy saving mode is on, the DC automatically shuts down after 12

hours (if the power is less than 2W), and the AC automatically shuts down after 12

hours (if the power is less than 5W).

13 Charge power

The input charging power is indicated by "INPUT".

14 Output charge power

The total output power is indicated by "OUTPUT".

15 AC output

The AC inscription and a plug symbol indicate that the 240V output is active.

16 DC output

A socket symbol and the DC inscription indicate that the 12V DC outputs and the

12V vehicle output are active.

17 USB-A

A USB-A symbol and the USB inscription indicate that the USB-A outputs are

active.

18 Type-C

A Type-C symbol and the Type-C inscription indicate that the Type-C output is

active.

19 Wi-Fi/Bluetooth

After powering on, if the module has distribution network information and can

connect to the cloud, this icon will be steady. If there is no connection, this icon

will not be displayed.

If you press the network distribution button for more than 5 seconds, the icon

blinks, indicating that the device can be reconfigured.

20 Warning icon

When the device fails, the icon lights up, and the screen shows the failure code.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 13

Switching the Product On and Off

Switching On:

1. Press the ON/OFF switch with the operating indicator until the operating indicator lights up green.

2. The LCD display becomes visible.

Switching Off:

1. Keep the ON/OFF switch with the operating indicator pressed for a few seconds.

2. The operating indicator and the LCD display will go out.

NOTE: The LCD display goes out automatically after a certain amount of time without operation. Press

the ON/OFF switch with the operating indicator briefly to switch the LCD display on again.

NOTE: If the DC/AC buttons are switched off and no consumer is connected to the USB-C connection,

the product shuts down automatically after 120 minutes to save power.

NOTE: You can switch the display lighting on or off with a short press of the ON/OFF switch with the

operating indicator.

NOTE: Always remember to turn off the product when not in use.

Charging

NOTE: The product is not fully charged when delivered. We recommend fully charging the product

before initial use.

While charging, the ring symbol on the LCD display is in a dynamic state. After fully charging the battery, the

display symbol is in a static state.

NOTE: Please make sure that the connected electrical products can work properly before using this

product. It is normal for the product to warm up while charging. Regular discharging and charging

increase the service life. Ensure that the cabling is properly inserted; otherwise, the contact terminals

could melt or catch fire at high temperatures. Charge the product at an ambient temperature of 0 to 40°C.

Charging with the Mains Power Unit

Always use the mains power unit supplied with the product.

1. Press the ON/OFF switch with the operating indicator until it lights up green. The LCD display will become

visible.

2. Connect the input plug of the AC power cable to a wall outlet, and connect the other end to the AC charging

input port of the product.

3. You can read the charge status on the LCD display.

4. When the power station is fully charged, the charging process ends automatically.

5. As soon as the power station is fully charged, switch the product off and disconnect the mains power unit

from the power connection.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 14

Charging with a Solar Panel (not included)

1. Press the ON/OFF switch with the operating indicator until it lights up green. The LCD display will become

visible.

2. Place your solar panel where it can get as much direct sunlight as possible.

3. Connect the solar panel to the charging socket.

4. You can read the charge status on the LCD display.

5. When the power station is fully charged by the solar panel, the charging process ends automatically.

6. Disconnect the solar panel from the power station and switch it off.

NOTE: You can link several solar panels to each other to shorten the charging time. The power station

can absorb 400W of charging power. The off-load voltage of the solar panel should be between 12V and

60V. Otherwise, the overvoltage protection of the charging process can be triggered or cause damage.

The charging time varies depending on light intensity.

Charging via the 12V Vehicle Output (Cigarette Lighter) in a Vehicle

Ensure that the vehicle engine is running.

1. Connect the power station and the 12V socket (cigarette lighter) of your vehicle using the car charger cable.

2. Charge the power station after starting the vehicle. You can read the charge status on the LCD display.

3. When the power station is fully charged, the charging process ends automatically.

4. Disconnect the car charger cable from the power station when fully charged.

Description of the Various Connections

This product is equipped with three function outputs: the AC area, DC area, and USB area.

•

Type-C output: smartphones, tablets, etc.

•

USB 5V 2.4A output: smartphone, MP3 player, digital camera, e-reader, tablet, etc.

•

USB 12V 2A Fast Charge output: smartphone, MP3 player, digital camera, e-reader, tablet, etc. (provided

these devices support fast charging)

•

12V DC output: mainly used for LED light bulb lighting.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 15

•

240V AC output: notebook, camera, display devices, and other working devices requiring alternating current

with a maximum power of 1200W.

•

12V vehicle output: camping equipment with a 12V connection, such as kettles, camping refrigerators,

travel coffee machines, camping cool boxes.

NOTE: The direct current output (DC) is suitable for most products on the market. Some products with

high current can trigger the overload protection. Devices with a power rating of more than 1200W must

not be operated with this power station.

Start Up

NOTE: If certain connections are not used, switch them off to save power. To do this, press the DC

button with the operating indicator or the AC button with the operating indicator.

Preparation Before APP Connection (First-Time Connection)

1. Use the QR code below to download the "Power Station Manager" app on your phone.

2. Ensure the phone and power station are as close as possible.

3. Ensure the power station is turned on and the display screen shows the battery level is ≥ 0. It’s now ready

for pairing:

Press the IoT RESET button for over 5 seconds, and the Wi-Fi/Bluetooth icon on the display screen will

flash, indicating that the device is available for pairing.

4. Ensure that the phone is connected to the mobile network and has access to the Internet.

Click on an icon below to access the app:

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 16

Bluetooth APP Operating Instructions

APP Interface Description

After installing the APP, open it directly and allow all permissions requested. Go to the home page and wait to

add devices, as shown in Figure 1.

Bluetooth Connection Instructions

CONDITIONS: The Bluetooth connection of the user's mobile phone should be kept within 30 meters,

and the mobile phone should not be too far away from the power station when connecting to prevent

unsuccessful connections. Please note that APP function is a supplementary feature. It is not required

to operate the unit indefinitely.

1. Turn on the power station with Bluetooth function and ensure the SOC (power display) is ≥0%. Press the

icon with the WIFI sign for ≥5 seconds. When the machine screen displays the icon shown in Figure 2 is

flashing, it can be connected to your phone via Bluetooth.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 17

2. Turn on Bluetooth, click the device on the home page of the APP, and a page for Bluetooth and WIFI will

pop up.

3. Enter the mobile phone authorization, and a pop-up will ask to allow Bluetooth or WIFI to be turned on.

Select Allow, then wait to search for nearby devices in the distribution network state, and click Add, as

shown in Figure 3.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 18

Select Connection Control Mode

Bluetooth Close Range Control Mode

1. Ensure the mobile phone with the APP function is within 30 meters of the power station, and there is no

shielding. For close-up individual Bluetooth connection mode, click "Skip" to switch to the Bluetooth

connection mode, as shown in Figure 4 below.

2. Click "Next Step," as shown in Figure 5, for Bluetooth connection.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 19

3. After the connection, a success message, as shown in Figure 6, will pop up. Click "Finish," indicating that the

Bluetooth connection is successful.

4. Once the connection is successful, the interface shown in Figure 9 will automatically be displayed, indicating

a successful connection to this Bluetooth control mode.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 20

WiFi Remote Control Mode

You can switch to WiFi remote control mode after successfully connecting in Bluetooth close range mode. You

can also directly use the WiFi remote control connection; (Mode 2 remote control must be within the range of

WiFi coverage).

1. First of all, WiFi must be turned on when Bluetooth is turned on, and the WiFi must be connected to the

internet, as shown in Figure 7 below.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

E&OE © GenPower 21

2. Directly click "Next" to wait for the distribution network. The distribution mode is the same as the Bluetooth

proximity control mode. Once the connection is successful, as shown in Figures 5 and 6, the WiFi Bluetooth

remote control mode is successfully connected.

3. To switch back to Bluetooth proximity control mode, just disconnect WiFi and wait about 1 minute.

Two Connection Modes Switch

Bluetooth Connection Switch / WiFi Remote Connection

After the Bluetooth connection is successful, you can switch to the WiFi connection. Turn on WiFi and

successfully connect to WiFi that has normal internet access. Then the remote control can be successfully

connected, as shown in Figure 6. Return to the home page to confirm the remote connection switch is

successful.

After successfully switching to remote control, return to the home page to refresh. You can also disconnect WiFi

and Bluetooth and use the data network to achieve remote control. After the switch is successful, even if you exit

the Smart Life APP, as long as you do not delete the connected device, re-entering the APP will still keep the

connection.

Display Illustration

Wi-Fi Icon Display

If the user turns on the power station device with SOC ≥0% and no Wi-Fi icon is displayed, press the Wi-Fi icon

for ≥5 seconds to activate the Wi-Fi icon. Wait for the Wi-Fi icon on the panel to start blinking, and then connect

your phone's Bluetooth.

•

If the Wi-Fi icon flashes after the device is turned on, it indicates that the device has successfully connected

to the APP. Simply turn on the Bluetooth connection.

•

If the Wi-Fi icon continues to light up when the device is turned on, it indicates that someone has connected

to the device. Disconnect or press the Wi-Fi icon button for ≥5 seconds to reset and reconnect Bluetooth.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

Connection Success Display

The user follows the above connection instructions, and when the Wi-Fi icon on the power station screen lights

up, the connection is successful. The APP must have Bluetooth turned on to connect.

SOC Display (Power Display)

After the connection is successful, the SOC power and the power station screen display the same number

(including the coloured dot outside the SOC). When the SOC ≤10, the outer ring on the APP turns red. When the

SOC >10, the outer ring turns blue, as shown in Figure 10 below.

ATTENTION: When using the respective consumer, select the appropriate output depending on the

required type of current for the consumer to be operated.

Supplying the Consumer with Direct Current

Press the DC button with the operating indicator to supply the products with direct current.

1. Insert a consumer into the corresponding output.

2. With the product switched on, press the DC button with the operating indicator to switch on the 12V DC

output, the 12V vehicle accessory power output, and the USB connections.

3. The corresponding operating indicator lights up, and the display symbols for DC and USB are displayed on

the LCD display.

4. The corresponding output can now be used.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

5. Press the DC button with the operating indicator again to switch off the 12V DC, the 12V vehicle accessory

power output, and the USB connections.

6. The corresponding operating indicator goes out, and the display symbols for DC and USB are no longer

displayed on the LCD display.

Supplying the Consumer with Alternating Current

Press the AC button with the operating indicator to supply the products with alternating current.

1. Insert a consumer into the corresponding output.

2. With the product switched on, press the AC button with the operating indicator to switch on the AC outputs.

3. The corresponding operating indicator lights up green, and the display symbol for AC is displayed on the

LCD display.

4. The fan also switches on when the temperature rises, and the corresponding display symbol is displayed on

the LCD display.

5. The output can now be used.

6. Press the AC button with the operating indicator again to switch off the AC outputs.

7. The operating indicator goes out, and the display symbol for AC is no longer displayed on the LCD display.

The display symbol of the fan disappears as soon as the device has cooled down again.

NOTE: You can read the total consumption of your consumers on the LCD display. The value indicates

how much power your products draw from the power station.

Overload Protection

The power station is equipped with overload protection.

1. Disconnect the consumer from the product that triggers the overload protection.

2. Switch the product off and on again to acknowledge the error.

3. Then the product can be used as usual.

NOTE: If possible, keep your portable power station fully charged before long-term non-use. Otherwise,

it can negatively affect the service life of the battery.

Electrical Connection

The connection complies with the applicable VDE and DIN provisions. The customer’s mains connection, as well

as the extension cable used, must also comply with these regulations.

Important Information! In the event of overloading, the product switches itself off. After a cool-down

period (time varies), the product can be switched back on again.

Damaged Electrical Connection Cable

The insulation on electrical connection cables is often damaged. This may have the following causes:

•

Pressure points where connection cables are passed through windows or doors.

•

Kinks where the connection cable has been improperly fastened or routed.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

•

Places where the connection cables have been cut due to being driven over.

•

Insulation damage due to being ripped out of the wall outlet.

•

Cracks due to the insulation ageing.

Such damaged electrical connection cables must not be used and are life-threatening due to the insulation

damage.

Check the electrical connection cables for damage regularly. Ensure that the connection cables are

disconnected from electrical power when checking for damage. Electrical connection cables must comply with

the applicable VDE and DIN provisions. The printing of the type designation on the connection cable is

mandatory.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

Lithium Battery Care and Maintenance

Top 3 Battery Care Requirements

1. Charge battery before first use. The battery may arrive with some charge, regardless of this the

battery must be charged on the initial charge and for each subsequent charge.

2. Charge battery immediately when it is depleted. Do not store a depleted battery. This will

permanently impact the life of the battery. If the battery is going to be stored for a period of time, fully

charge the battery before storing.

To ensure the battery maintains optimum performance, follow the guidelines outlined below.

•

For best results, charge batteries in temperatures between 10°C and 30°C

•

When battery is charged, disconnect the charger from the power supply and remove the battery from the

charger.

•

If a battery is stored or otherwise unused for an extended period, and the battery has no charge remaining

when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a

new battery.

•

Use only with the battery charger specified by the manufacturer.

•

Ensure that the battery charger electrical cord is not subjected to damage or stress. Do not operate the

battery charger if it has a damaged electrical cord or plug.

•

Do not use the charger in wet areas or expose it to rain or water.

•

The typical estimated life of a Lithium battery is about two to three years or 300 to 500 charge cycles,

whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully

recharged again.

•

Explosion hazard – protect the battery against heat, for example, direct sunlight and fire. Do not store

batteries in vehicles or locations subject to heat.

•

Batteries can explode in the presence of an ignition source, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product in the presence of open ﬂame. Exploding batteries

can propel debris and chemicals.

•

Do not open the battery – danger of short-circuiting and/or explosion.

•

Do not attempt to destroy or disassemble the battery pack or remove any of its components.

•

Do not touch the battery terminals with metal objects and/or body parts as short-circuit and/or personal injury

may result.

•

Explosion hazard – do not open and/or short-circuit the battery.

•

Poison hazard – battery leakage (liquid ejection). Under extreme conditions, liquid may be ejected from the

battery – avoid contact. If contact accidentally occurs, immediately seek medical attention, and flush with

water. If liquid contacts eyes, immediately seek medical attention, flush with clean water for at least 10

minutes. Liquid ejected from the battery may cause irritation or burns.

•

Dispose of non-serviceable batteries in an environmentally responsible manner and according to local

regulations.

Failure to adhere to the requirements above may result in the battery becoming inoperative or battery life being

reduced. In extreme cases or abuse, battery overheating, or fire may result.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

Maintenance, Storage, and Transport

Cleaning

•

Switch the product off before performing any cleaning work.

•

We recommend that you clean the product directly after every use.

•

Wipe dust off the product from time to time with a dry cloth.

•

Do not use any cleaning products or solvents; they could damage the plastic parts of the product.

•

Make sure that no water can penetrate the interior of the product.

Transport

•

When transporting, make sure that the product is switched off and no consumers are connected.

•

For a short transport distance, carry the product by the transport handle.

•

If transporting the product by car or similar means, please ensure that the product does not move during

transport. Otherwise, the product can be damaged, which can lead to electric shock, heating up, fire, etc.

Storage

•

Store the product and its accessories in a dark, dry, and frost-free place that is inaccessible to children.

•

The optimum storage temperature lies between 0 and 40°C.

•

Store the product in its original packaging.

•

Cover the product to protect it from dust or moisture.

•

Do not store the product in the car, boot, loading platform, or in other hot locations in direct sunlight. It may

cause product failure, degradation, or thermal problems.

•

Fully charge the product before storage.

•

To prevent a deep discharge, charge the product every 3 months even if not in use.

Maintenance

There are no parts on the product that require maintenance. Have tasks that are not described in these

operating instructions carried out by our service centre.

Repairs

Repair work on the electrical equipment may only be carried out by qualified electricians.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

Troubleshooting

The following table shows fault symptoms and describes remedial measures in the event of your product failing

to work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.

Fault Possible cause Remedy

Device does not work or not as

expected

Overheating protection

Check the ambient temperature.

Output is restarted when the generator

cools down.

Battery over-current protection

Disconnect the product from the power

connection and carry out

commissioning again.

Battery charging protection

Contact the customer service

department.

Protection at low discharge

temperatures

Check the ambient temperature to see

if it is lower than -10°C.

Battery low voltage protection

Charge the product in good time,

restart after it has fully charged.

Power inverter overcurrent protection

Check if the AC output is overloaded

or short-circuited.

Power inverter overload protection Check if the AC output is overloaded.

Power inverter short-circuit protection

Check if the AC output is overloaded

or short-circuited.

Protection against overvoltage while

charging

Check whether the input voltage

exceeds the maximum input voltage.

Battery overheat protection

Check if the ambient temperature is

higher than 40°C. Allow the product to

cool down.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

Error Codes

Error

Code

Possible Cause Remedy

F001

Defective power amplifier Contact manufacturer or authorised service centre.

F002

BMS failed to communicate with the main

control

Contact manufacturer or authorised service centre.

F003

Fan stuck

Check whether the fan is stuck and whether the cable is

connected properly.

F004

Power amplifier overheated

Switch off the Power System and let it cool down. Check the

functionality of the fans if necessary.

F005

External short-circuit or overload

Switch off the Power System and let it cool down. Check the

functionality of the fans if necessary.

F006

Inverter hardware protection

Check whether the AC output is within the rated operating

range of the device.

F007

Output voltage of the power amplifier too low

Remove the connected consumer, switch off the Power

System and restart.

F008

Low voltage Recharge the Power System.

F009

The output voltage of the city power does not

match with the power station

Check the output of the city power and read the instructions

carefully to ensure that the connected city power signal is

consistent with the instructions.

F010

The output frequency of the city power does

not match with the power station

Check the output of the city power and read the instructions

carefully to ensure that the connected city power signal is

consistent with the instructions.

F011

AC output overload

Check whether the AC output power is too high and reduce the

load.

F013

DC charging over-voltage

Check whether the Solar/Car input voltage exceeds 60V and

reduce the DC input voltage.

F015

DC 12V or cigarette lighter output is

overloaded or short-circuited

Check whether the 6514 interface or cigarette lighter is short-

circuited or overloaded.

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

PS1200 Power System

Specifications

Power (Watts) 1200W

Maximum Wattage 2400W

Battery Capacity 1075Wh (90Ah @ 12V)

Parallel Connection Option Yes

AC Output (Pure Sine Wave) 240V

Battery Cell LiFePO4 (32700 3.2V 6AH)

2x USB-C 100W-5V, 9V, 12V, 15V 3A, 20V 5A (E-Mark)

2x USB-A FAST 5V/3A 9V/2.2A 12V/2A

2x USB-A 5V/2.4A

GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER GENPOWER

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

GENPOWER GENPSTGN1M2A 1200W Portable Power Station

Product's Documents

Product manual

Specifications

GENPOWER GENPSTGN1M2A Questions and Answers