Loading ...
Loading ...
Loading ...
Assembly & Set-Up
3
6
NOTE: All references to the left or right side of the jet sweep blower
are from the operator’s position. Any exceptions will be noted.
Assembly
Attaching the Upper Handle
1. Remove the carriage screws and star knobs from the upper
holes in the lower handle. See Figure 3-1.
Figure 3-1
2. Place the upper handle over the lower handle, aligning the
upper holes/metal tabs in the upper handle with the upper
holes/lower holes in the lower handle. See Figure 3-2.
Figure 3-2
3. Secure with the carriage screws and star knobs removed
earlier. See Fig. 3-2.
Contents of Crate
• One Jet Sweep Blower • One Upper Handle • One Chute Attachment
• One Pair of Safety Glasses • One Jet Sweep Blower Operator’s
Manual
• One Engine Operator’s Manual
Loading ...
Loading ...
Loading ...