Loading ...
Loading ...
Loading ...
English 39
Using the Refrigerator
Replacement
Water filter
WARNING
• Do not use third-party water filters. Use only Dacor-provided or -approved filters.
• Unapproved filters may leak and damage the refrigerator, causing electric shock. Dacor
is not responsible for any damage that may occur from use of third-party water filters.
The filter indicator (
) turns red to let you know it is time to replace the water filter.
Before replacing the filter, make sure the water supply line is shut off.
Water Filter
Rotate Counterclockwise
to Remove
1. Open up the Cover Grille on the top of
the refrigerator.
2. Turn the dispenser filter counter
clockwise to remove.
3. Replace with a new dispenser filter.
4. Close the Cover Grille.
5. Press and hold Water on the feature
panel for 3 seconds to reset the life
cycle detector.
The filter indicator ( ) turns off.
6. When you are done replacing the filter,
open the water valve and run water
through the dispenser for about 7
minutes. This is to remove impurities
and air from the water line.
NOTE
• A newly installed filter may cause the water dispenser to spurt water briefly. This is
because air has entered the waterline.
• The replacement process may cause the water dispenser to drip for a short period of
time. If it drips, simply wipe up any water on the floor with a dry towel.
TBI_Dacor_UserManual_DA68-03581B-00_EN.indd 39 2022-11-18 5:56:17
Loading ...
Loading ...
Loading ...