www.PyleUSA.com
INSTALLATION INSTRUCTIONS
If you purchase a Crossover
Network for your Woofer/
Midrange/Tweeter system
you do not need to
connect condenser.
If your system does not
include a Crossover Network,
you must connect condenser as follows:
1. Connect either end of condenser to the positive
terminal (+) of speaker.
2. Connect other end of condenser to the speaker
wire harness. Be certain to connect to Positive side of
harness, which is the radio out put (+) side.
3. It is recommended that you solder each connection
for best results.
4. Secure condenser to speaker frame with glue.
www.PyleUSA.com
Features:
• 3.25'' Aluminum Bullet Horn w/1'' Super Tweeter
• 20 oz. Magnet Structure
• 300 Watts Rated Power
• Ferro Fluid Enhanced
• Frequency Response: 2k-25kHz
• SPL: 96dB
• 4/8 Ohms Impedance
• Complete to Any Woofer Enclosure
• Complete Pair w/Capacitor Crossover Network
and Hardware
TEMPLATE
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: [email protected]
