Loading ...
2
1. Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that must be followed during the installation and operation of the
product described in this manual. Failure to comply may invalidate the warranty and cause property damage or
personal injury.
AC Power Distribution Unit:
• To remove the AC power distribution unit from the supply mains, the power cord serves as a disconnect device.
• If any of the following situations arise, have your equipment inspected by a service technician:
• The equipment has been exposed to moisture.
• The equipment has been dropped and damaged.
• The equipment shows obvious signs of breakage.
• The equipment is not functioning properly or is not functioning according to the instructions described in this Owner’s
Manual.
• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the
failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
Charging Station Tower Unit:
• Keep the charging station tower unit in a controlled indoor environment away from moisture, temperature extremes,
flammable liquids and gasses, conductive contaminants, dust and direct sunlight.
• Leave adequate space at the front and top of the charging station tower unit for proper ventilation.
• The charging station tower unit is heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or
install it unassisted.
• Do not place any object on the charging station tower unit, especially containers of liquid, and do not attempt to stack
charging station tower units.
• Inspect the shipping container and the charging station tower unit for shipping damage. Do not use the charging station
tower unit if it is damaged.
• Make sure the charging station tower unit is placed in a structurally sound area capable of bearing the weight of the
charging station tower unit, all equipment that will be installed, and any other charging station tower units and/or equipment
that will be installed nearby.
• Charging station tower unit must be installed by a qualified technician.
• Use suitable mounting means when installing to cinder block, concrete, drywall or wood studs.
• Use caution when cutting packing materials. The charging station tower unit could be scratched, causing damage not
covered by the warranty.
• Save all packing materials for later use. Repacking and shipping the charging station tower unit without the original packing
materials may cause product damage that will void the warranty.
If installing optional CSTCASTERKITXX caster kit
(refer to section 6. Optional Caster Kit):
• When rolling the charging station tower on its casters, always push it from behind using the handles. Never pull the unit.
• A rolling charging station tower can cause personal injury and property damage if not properly supervised. If rolling the
enclosure down a ramp is required, use extreme caution. Do not attempt to use ramps that have a slope grade greater than
12%.
Loading ...
Loading ...
Loading ...