MODULAR SHELF 645MM
MODEL NO: APMS70
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this shelf.
9 Keep the work area clean, uncluttered and ensure there is adequate lighting.
8 DO NOT use the shelf for any purpose other than that for which it is designed.
8 DO NOT use outdoors.
8 DO NOT use in a damp or wet location or an area where there is condensation.
8 DO NOT clean with any solvents which may damage the surfaces or the protective coating.
8 DO NOToverload.
2. INTRODUCTION
Tough and durable easy t shelf with hammered metal nish. Ideal for storing small components and keeping work areas clean and tidy. Suitable
to t on the back panel of the APMS Superline Pro Wall Cabinets and Storage Systems. To be used specically with APMS50BP or APMS60BP.
Some simple assembly required.
3. ASSEMBLY
3.1. Slide end plates over each end of shelf.
3.2. Secure with supplied screws.
3.3. Fit onto peg board.
APMS70 Issue 1 03/03/22
Original Language Version
© Jack Sealey Limited
Refer to
instruction
manual
Wear
protective
gloves
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
