Loading ...
Loading ...
Loading ...
19
English
If there is interference in the neighborhood,
the set may pause during playback or
respond slowly to your operation. In such
cases
– Use the WEP* key when connecting your Center
and Station to an existing wireless PC network. See
the manual Connect to your PC: Option 2.
– Change the operating channel of your Center
and Station when connecting them to an existing
wireless PC network. To learn about how to change
channels, see the Owner’s manual of your router
and the manual Connect to your PC: Option
2.
– If possible, change the operating channels of the
other Wi-Fi devices at your home.
–Turn the above devices in different directions to
minimize interference.
* stands for Wired Equivalent Privacy. It is a
security protocol for wireless local area
network
Rear connections
Warning:
Never make or change connections with
the mains supply switched on.
A Connecting to an audio system
You can easily connect your WACS5 to your
existing home audio systems, such as the audio/
video receiver, home theatre system, mini/micro
system, or multimedia speaker boxes (with built-
in amplifier) and audio amplifiers.
Using audio cables, connect one (one set) of
WACS5’s sound output terminals: LINE OUT,
DIGITAL OUT or OPTICAL OUT to the
corresponding input terminals in the connected
device. For better sound output, use DIGITAL
OUT or OPTICAL OUT if it is available on
the connected device.
Helpful hints:
– DIGITAL OUT and OPTICAL OUT are
available on WAC5 Center only.
Center
Station
LINE OUT:
1 Connect Center to an audio system:
a. Insert the red plug of the red/white audio
cables (supplied) to the red socket LINE
OUT R and the white plug to the white
socket LINE OUT L
b. Connect the other end of the audio cables to
the AUX IN (or AUDIO IN) terminals of
the additional appliance, red plug to the red
socket AUX IN R and white plug to the
white socket AUX IN L
OPTICAL OUT
DIGITAL OUT
2 Connect Station to another audio system:
a. Insert the one-plug end of the audio cables
(supplied) to LINE OUT
b. Connect the two-plug end of the audio cables
to the AUX IN (or AUDIO IN) terminals of
the additional appliance, red plug to the to the
red socket AUX IN R and white plug to the
white socket AUX IN L
LINE OUT
DC
3 Select AUX mode in the connected audio
system
Installation
(for illustration only)
(for illustration only)
p001-p043_WACS5_Eng_22 9/8/2005, 11:2219
Loading ...
Loading ...
Loading ...