Loading ...
Loading ...
Loading ...
Page 28
Note: The pump was lled with oil at the factory. The preferred oil is SIMPSON
®
Premium
Pump Crankcase Oil. If this oil is not available, an SAE 15W-40 oil may be used. Change
the oil after the rst 50 hours of operation and every 100 hours thereafter or every 3 months.
Pump Maintenance
2
3
1. Oil sight glass
2. Oil ll plug / vent cap
3. Oil drain plug (not shown)
1
1. Loosen the pump oil ll plug / vent cap.
2. Place a container under the oil drain plug.
3. Remove the oil drain plug.
4. After the oil has drained, insert the oil drain plug; tighten securely.
5. For AAA
®
pumps, rell with SIMPSON
®
Premium Pump Crankcase Oil. If this oil is not
available, an SAE 15W-40 oil may be used.
For CAT Pumps
®
***, rell using a non-detergent hydraulic oil (ISO68).
6. Make sure the oil level meets but does not exceed the dot in the center of the sightglass.
7. Insert the oil ll plug; tighten securely.
How to change the pump oil
*** CAT Pumps
®
is a registered trademark of Diversied Dynamics Corporation.
Loading ...
Loading ...
Loading ...