Loading ...
Loading ...
Loading ...
Installation instructions en
45
3.
Secure the appliance using a suitable screw.
29.12 Attaching the fastening elements
In order to attach the panels, the four fastening ele-
ments must be fitted beforehand.
1.
Fold together the fastening element.
2.
Hook in the fastening element at the bottom and
press down at the top until it is in place.
Attach the red fastening elements at the top.
Attach the green fastening elements at the bottom.
29.13 Aligning the panels and intermediate
strips
The panels and intermediate strips are aligned at the
same time.
Requirement:The appliance must not yet be screwed
in tightly. If it is already screwed in tightly, undo the
fastening screws.
▶
From the rear, turn the fastening elements to the
right or left to adjust the alignment of the panels and
intermediate strips.
29.14 Removing the door handle and side
panels
ATTENTION!
Unsuitable tools may damage the surface of the appli-
ance.
▶ Only use plastic tools.
▶ Do not use pointed or sharp tools.
1.
Loosen the screws on the door handle and remove
the door handle.
2.
Remove the left- and right-hand panels using a
plastic tool.
29.15 Removing the appliance
1.
Disconnect the appliance from the power supply.
2.
Remove the left- and right-hand panels.
3.
Undo the fastening screws.
4.
Lift the appliance slightly and pull it out completely.
Loading ...
Loading ...
Loading ...