Loading ...
Loading ...
3
24. DANGER: Risk of child entrapment.
Before you throw away your old unit:
Take off the doors. Leave the shelves in
place so that children may not easily
climb inside.
25. To avoid the risks that are always
present when using an electric
appliance, we recommend that you
follow the instructions.
26. Unpack the appliance and carefully
check the interior and exterior. Should
any damage be evident, do not plug
in the appliance. Instead, immediately
contact the store where you
purchased it.
27. Do not use electrical appliances inside
the food storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.
28. If the supply corrd is damaged, it must
be replaced by the manufacturer, its
service agent, or similarly qualied
person in order to avoid a hazard.
29. Do not store explosive substances such
as aerosol cans with a ammable
propellant in this appliance.
30. If you are discarding the appliance,
pull the plug out of the socket, cut
the connection cable (as close to the
appliance as you can), and remove the
door to prevent playing children to suffer
electric shock or to close themselves
into it.
31. Do not use extension cords or
unground(two prong) adapters
WARNING
To reduce the risk of fire, electric shock, or
personal injury, unplug or disconnect the
appliance from the power supply before
servicing.
- Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear
of obstruction.
- Do not use mechanical devices or other
means to accelerate the defrosting
process, other than those recommended by
the manufacturer.
- Do not damage the refrigerant circuit.
- Do not touch the light bulb if it has been on
for a long period of time because it could be
very hot.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY
SPECIAL CORD SET
INSTRUCTIONS
NOTICE
For your protection, this unit is equipped
with a 3-conductor cord set that has a
molded 3-prong grounding-type plug, and
should be used in combination with a
properly connected grounding-type outlet
as shown in gure A.
NOTE: Do not remove the grounding
prong.
Loading ...
Loading ...
Loading ...