Loading ...
Loading ...
Loading ...
Introduction
39
1
2. Loosen the knobs by turning it anticlockwise.
Loosen the knob
Long Screw
Figure 1-60
3. Attach the box to the wall with the knobs pointing down and use a marker to mark 4 dots.
4. Drill 4 holes according to the marks.
5. Insert 4 screw anchors to the holes and secure the to the wall with 4 long screws.
6. Thread the camera cable through the box cover and secure the camera to the cover with
4 short screws.
7. Reattach the box cover to the power box, as shown in No. 7, Figure 1-61.
8. Thread the Ethernet cable through the PG21 conduit connector and the power box as
shown in No 8, Figure 1-61. Then connect the cable to the camera. To waterproof the
cable, see 1.8 Waterproofing the Cable.
9. Rotate the plastic ring to secure the conduit connector to the power box. Secure in the
cap, as shown in No 9, Figure 1-61
10. Secure the box cover to the power box, as shown in No 10, Figure 1-61.
Cap
10
7
Plastic Ring
13
9
8
Figure 1-61
Loading ...
Loading ...
Loading ...