Loading ...
Loading ...
Loading ...
DHC-2200 / 2800 OPERATION
X7508280400 23
© 07/23 ECHO Incorporated
When power to unit is turned on:
• After 90 seconds of inactivity, unit will power itself off.
• If power indicator LED remains lit, operation is normal.
• If power indicator LED flashes once per second, the battery needs to be
charged.
• If power indicator LED flashes four times per second, there is a fault
within the product. Turn power off to unit. Remove battery. Clear debris
from around line head. Install battery. Turn power on to unit. If flashing
continues, have your authorized servicing dealer repair the product.
Stopping Unit
The attachment continues to run for a short period after the unit
is switched off.
1. Release power
switch and allow unit
to stop.
2. Push enable button
(A) to turn off power
to unit.
• Power indicator LED
(B) turns off when
power to unit is turned
off.
• If the unit does not
stop when power
switch and operator
presence switch are released, push enable button to turn off and remove
the battery to stop the power supply to product. Have your authorized
servicing dealer repair unit before using product again.
Rotating Operation
Always stop the unit before rotating the handle!
Failure to do so could result in serious injury.
E
C
B
C
A
D
Loading ...
Loading ...
Loading ...