Loading ...
Loading ...
Loading ...
3
Table 1-3 Working Mode Description
Working Mode Description
M1 Standard
Switch
All ports can communicate with each
other, equivalent to a standard gigabit
switch.
M2 Port
Isolation
All downlink ports are isolated from
each other and can communicate only
with uplink ports. This mode is used for
broadcast storm suppression and
network performance improvement.
M3 Port
Aggregation
Uplink ports are aggregated into one
aggregation group. This mode is used for
increasing uplink bandwidth and
preventing network congestion.
M4 Network
Clone
Flow control of all ports is disabled, and
a dedicated broadcast and multicast
packet processing mechanism is set. This
mode is used for accelerating batch
network clone and reducing device
breakdowns in various complex
networking environments.
2 Installation
Please select an appropriate installation method according to the
actual needs.
Note
●
0500R series switches support desktop placement, wall
mounting, and rack mounting, while 0500 series switches
support only desktop placement and rack mounting.
●
The following figures are for illustration only. The actual device
prevails.
Before You Start
Ensure that the desktop or rack is stable and firm enough.
Keep the room well-ventilated. Leave at least 10 cm of heat
dissipation space around the device.
Keep at least 1.5 cm vertical distance between two adjacent
devices for rack mounting.
2.1 Desktop Placement
Place the device on the desk.
2.2 Wall Mounting
Steps
1. Check the distance between the two hanging holes on the rear
cover of the device.
2. Insert two self-prepared M4 screws into the wall.
Loading ...
Loading ...
Loading ...