Loading ...
Loading ...
Loading ...
16
Activating Cooking Zone Timer
To activate the timer, press both the plus (+) and
minus (-) keys together.
A timer can be activated for each active cooking zone.
After selecting the timer the cooking zone related
luminous symbol is fully lit and the timer display
shows 0.00. For the following 10 sec it is now pos-
sible to assign a timer value to the active cooking
zone. After 10 sec without input, the timer function
is deactivated and the display is switched off again.
Using the timer selection key again (as long as no
value was set) the next active cooking zone can be
selected.
Setting a timer value
By pressing the timer keys, a timer value can be set. If
the timer-plus-key is pressed first the display starts
with 1 min and can be increased in 1 min steps. If the
timer-minus-key is pressed first the timer starts with
15 min and can be decreased in 1 min steps.
Pressing the key permanently speeds up the timer
adjustment. The speed will also increase while the key
is held. (the time between two time steps reduces).
If a timer has expired the timer alarm is activated and
the assigned cooking zone is immediately switched
off.
The cooking zone display shows 0 or H.
4
If no user input stops the alarm signal it
will be on for maximum 2 minutes.
4
The alarm can be deactivated by
switching off the control using the main
switch or by pressing the two timer keys
or it will be deactivated automatically
after 2 minutes.
Switching off a timer or changing the time setting
The timer value can be modified at any time by
selecting the timer and then by pressing the (+ or -)
timer key.
To stop an active timer the value can be set to 0.
Pressing plus and minus simultaneously for 2 seconds
also resets the timer value to 0.00.
Minute Minder
The minute minder buzzes when the time set has
expired. It does not switch off any zone.
To Operate
1. Turn on the hob, using the on/off key.
2. Select the timer by pressing the + and - keys
together (do not activate any cook zone).
3. Set the right hand digit up to 9 minutes (Single
Minutes Units) and wait a couple of seconds.
4. The display will now indicate for you to set the left
hand digit, up to 90 minutes (10 Minute Units).
5. The timer is now set and begins counting down.
(No zone indicator light should be set).
You can now use the hob as normal.
When the time is up
1. The corresponding indicator in the timer display
will flash, the timer will beep.
2. Touch any control to stop the beeping.
6 Warning! - Never leave the hob
unattended when in use, even when you
have set the timer to turn off the cook
zone.
Additional timer information
To modify or cancel a timer setting follow steps 1) to 5)
above.
To set the timer for additional zones follow steps 1) to
5) above.
If multiple zones have been set for timed operation,
the timer display will always display the time for the
cook zone with the shortest time remaining.
To check the timer setting for a different cook zone,
press the plus and minus keys together until the clock
symbol illuminates next to the chosen cook zone. The
remaining time will briefly appear in the timer display.
Loading ...
Loading ...
Loading ...