Loading ...
Loading ...
Loading ...
INSTALLATION
9
• Remove all packing material before using your appliance.
• IM
PORTANT: Before connecting the unit to a power source, let it stand upright fo
r
appr
oximately 24 hours. This will reduce the possibility of a malfunction in the cooling system
from handling during transportation
.
• Cl
ean the interior surface with lukewarm water and a soft cloth.
• This unit is designed for freestanding or built in installation for indoor or outdoor use
.
Pos
ition the unit in a dry and well-ventilated place. Avoid placing the unit near any source of
heat or moisture, or in direct sunlight. Do NOT install the unit in a location with an ambient
temperature that will fall below 44°F.
• For freestanding installation, 5 inches of space between the back and sides of the unit are
suggested, which allows the proper air circulation to cool the compressor and condenser fo
r
ener
gy saving. Even for built-in installation, it is a must to keep ¼” space on each side
and
at
the top to ensure proper service access and ventilation. And the air vent at the front o
f
th
e appliance must never be covered or blocked in any way.
• Place the unit on a level surface strong enough to support it when it is fully loaded. To leve
l
th
e appliance, adjust the front at the bottom of the appliance
.
• For
best performance it is recommended that you install the appliance in a location with a
n
am
bient temperature between 44° -
100
°F.
If the ambient temperature is above or below
recommended temperatures, the performance of the unit may be affected.
adjustable feet
(The picture is just for reference.)
Loading ...
Loading ...
Loading ...