Loading ...
Loading ...
Loading ...
3. Press the Return Home button on the panel when robot is in standby mode; the
robot will enter into auto charging station. If battery is low, the indicator will
illuminate red during the recharging process. The light will begin “breathing”, and
the unit is fully charged when the light turns to a solid blue.
4. Keep the robot on the charging dock after it has finished the cleaning to keep it
ready for the next cleaning cycle.
5. If the robot is not used on a regular basis, turn OFF the power switch to protect the
battery.
6. If the robot is not used on a regular basis, recharge the robot at least once a month
to maintain the battery.
Charging dock
1. Before using the dock station, make sure it is connected to the power supply and
adapter.
2. Place the charging dock in a position flat on the ground with the back pushed up
against the wall. There should be no other object with strong reflections like mirror
or obstructions two metres in front of and one metre to the left, right and above the
charging dock. And also avoid direct sunlight.
3. After the robot has finished cleaning, it will return to the charging dock
automatically.
4. During the cleaning process, if the power is too low, the robot will not return to the
dock station for charging automatically. The robot will stop cleaning and sound an
alarm. Every 5 seconds the alarm will be repeated.
Attention:
• After the robot is turned ON, it will not operate for the first 10 seconds. Press
and hold the Return Home button for 3 seconds and the robot will
automatically enter sleep mode.
Loading ...
Loading ...
Loading ...