Loading ...
Loading ...
Loading ...
5 Configuration
EnablingVideoAnalytics
After you have applied the license, you can enable VA for as many channels as the license allows. By default, VA is
disabled for all channels.
In Luxriot EVO Console, open the target channel settings by double-clicking the channel in the list. Go to the Video
Analytics tab tab and put a check mark in the Enable option. Click OK to saveandclose the dialog box, or click
Apply to continue configuring the channel.
To disable VCA functionality for the selected channel, simply uncheck the Enable option and save. The rest of the
settings will be preserved.
Important: disablingVA for the target channel doesnotresetthesettings. Thus, you can pre-configure
the video analytics for more channels than your license allows, and then apply the license later.
Once VA engine has been activated and enabled, you can proceed with its configuration: choose the object classes to
be tracked, create zones etc. Once you do that, VA elements (bounding boxes) will be available in Luxriot EVO
Monitor (overlaying live video, instant playback and playback) and VA rules will be also available in the Event &
Action Configurator in Luxriot EVO Console as event basis.
You can check what channels are using VA license by adding the corresponding column in the Channels section. To
do this, click the grid icon in the upper right corner of Luxriot EVO Console and move the Video
Analytics column to the list on the left, then click OK.
VCA metadata overlay is displayed in Luxriot EVO Monitor in live, instantplayback and playback modes.
Other modes (e.g., Sequence playback) and video export donotsupport VCA overlay at this point.
The overall logic of VA setup is as follows:
enable VA
enable metadata overlay, if required
set up general engine parameters
add zones and rules
EnablingMetadataOverlay
VA metadata is disabled by default for all channels. To enable bounding boxes for the current video channel for all
Luxriot EVO Monitor applications, turn ON the Enable metadata display option in the VA settings. On the Luxriot
EVO Monitor side, it is possible to enable/disable separate overlay elements via application settings. Further details
on this can be found in the Luxriot EVO Monitor application user guide.
Evo Video Analytics 6
©2021 A&H Software House. All Rights Reserved.
Loading ...
Loading ...
Loading ...