INDUSTRIAL CABINET
MODEL NO: APIC900H
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
Original Language Version
© Jack Sealey Limited
1. SAFETY
1.1. GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and
general workshop practice regulations are adhered to when
using this cabinet.
9 Locate cabinet in a suitable work area.
9 Keep the work area clean, uncluttered and ensure there is
adequate lighting.
WARNING! Use cabinet on level and solid ground,
preferably concrete.
9 Keep the cabinet clean and tidy in accordance with good
workshop practice.
9 Keep children and unauthorised persons away from the work
area.
8 DO NOT use the cabinet for any purpose other than that
for which it is designed.
8 DO NOT use the cabinet outdoors.
8 DO NOT place the cabinet in a damp or wet location or an
area where there is condensation.
8 DO NOT clean the cabinet with any solvents which may
damage the surfaces or the protective coating.
8 DO NOT move the cabinet when there are items placed
inside.
8 DO NOT overload the cabinet.
2. INTRODUCTION
Industrialquality,doubledoor,freestandingcabinet.Uniteasytoassemblewithminimaltoolsrequired.Durable,scuresistantdesign.
Reinforced steel doors with zinc plated locking bars provide 3-point locking mechanism. Supplied with two coded keys. Ideal for home,
oce,garageorworkshopuse.
3. SPECIFICATION
Model No: ..................................................... APIC900H
Dimensions:
Overall Width: 900mm, Depth: 450mm, Height: 900mm.
Internal Width: 850mm, Depth: 420mm, Height: 810mm.
APIC900H Issue: 3 (H,F) 25/09/23
4. CONTENTS
4.1. Unpack the contents of the box and check against the parts list/diagram. If there are any parts missing,
contact your local Sealey dealer.
Part
No.
Part Name No. of Parts
A1 Rear Panel 1
A2 Rear Panel 1
B1 Left Side Panel 1
B2 Right Side Panel 1
C1 Left Door 1
C2 Right Door 1
D Top 1
E Bottom 1
F Inner Face Plate 1
G Outer Face Plate 1
J Plastic Stop 4
K Locking Pin Locator 2
L Hinge Pin Locator 4
M Screw 12
N Hinge Pin 4
5. ASSEMBLY
5.1. Assemble the cabinet following the numbered sequence below, referencing the parts list and diagram overleaf.
Use a trestle table or a workbench for convenience if required.
© Jack Sealey Limited
Original Language Version
APIC900H Issue: 3 (H,F) 25/09/23
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Original Language Version© Jack Sealey Limited
REGISTER YOUR
PURCHASE HERE
APIC900H Issue: 3 (H,F) 25/09/23
