Loading ...
Loading ...
Loading ...
DS-6900UDI(B) Series HD Video and Audio Decoder User Manual
55
Auto-Switch Cameras in One Window
Purpose
Auto-switch in one window is used for displaying the videos from the cameras in an area or
different areas, one after another, in a single window. You can specify the interval between camera
changes.
Click Smart Wall on control panel to open the Smart Wall window.
Click on the left to enter the Camera page.
Select Camera from the drop-down list.
Select area or cameras for auto-switch.
– Drag an area on the left panel to the window linked with a decoding output.
Make sure the cameras have been added to the area.
– Hold the Ctrl key and select multiple cameras in an area or different areas, and then drag
them to the window linked with a decoding output.
Up to 32 cameras can selected for auto-switch in one window.
Click Single-Screen Auto-Switch in the pop-up menu to display the videos of the cameras in
one display window of the smart wall.
The cameras starts switching automatically on the smart wall.
(Optional) Click << or >> in the toolbar of the video view to set the auto-switch interval.
Create a Roaming Window
Purpose
Windowing is to open a virtual window on the screen(s). The window can be within a screen or
span multiple screens. You can move the window on the valid screens as desired and this function
is called roaming. With windowing and roaming function, you can create custom window and the
window size and position will not be limited by the actual screen(s).
Click Smart Wall on control panel to open Smart Wall window.
Click and drag on the screens which are linked to decoding outputs to open a window.
Screens linked to BNC outputs are not available for opening a window.
Loading ...
Loading ...
Loading ...