1. INTRODUCTION
Available in four colours. Widely accepted colour-coding indicates Yellow = Forestry and Warehouse
Operatives. Black = Supervisor/Foreman. Blue = Visitor/Apprentice/Inexperienced person. White = Site
Manager/Competent Operative/Vehicle Marshall + Vest Sticker. Vented for user comfort. Hearing and face
shield accessories available. Ratchet suspension harness. Pop, twist and lock tting system prevents
unintentional loosening of headband. Material webbing cradle rather than rigid plastic means greater
comfort when wearing all day. Conforms to BS EN397.
Notied Body: 0194
Type Examination Certicate number: UKNI-B-220821
Carried out by: Inspec
2. SAFETY
9 Examine the helmet before use.
9 For adequate protection, this helmet must t or be adjusted to the size of the user’s head.
9 The helmet is made to absorb the energy of a blow by partial destruction or damage to the shell and the
harness, and even though such damage may not be readily apparent, any helmet subjected to severe
impact should be replaced.
8 DO NOT modify or remove components from the helmet, other than as recommended by the manufacturer,
as this will aect its ability to protect the wearer.
8 DO NOT modify the helmet to t any attachments.
8 DO NOT apply paint, solvents, adhesives or any labels.
3. USE
9 Adjust the helmet by means of the adjustment knob found at the rear of the helmet.
9 The size range is 52-63cm.
4. MAINTENANCE
4.1. CLEANING
9 Clean the helmet regularly using warm soapy water only.
8 DO NOT use abrasive materials.
4.2. STORAGE
9 Store in a bag or case out of direct sunlight, away from chemicals and abrasive substances, in a clean dust
free environment.
9 Use original bag for transportation.
4.3. OBSOLESCENCE
The date of manufacture is moulded into the helmet. The recommended shelf life is 5 years from this date,
and the recommended maximum “in use” life of the helmet is 3 years.
SAFETY HELMET - VENTED (BLACK)
MODEL NO: 502Y, 502BLK, 502B, 502W
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
Original Language Version
© Jack Sealey Limited
502Y 502BLK 502B 502W Issue 2 (1) 11/12/23
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO
MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR
FUTURE USE.
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective
Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
502Y - YELLOW
502BLK - BLACK
502BLK - BLUE
502W - WHITE
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specications and component parts
without prior notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please
email or call our technical team on technical@sealey.co.uk or 01284 757505.
IMPORTANT: No Liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any uids (if applicable) into approved
containers and dispose of the product and uids according to local regulations.
