Loading ...
Loading ...
Loading ...
2
CAUTION
Be sure to disconnect the A/C power cord before removing a base stand or
installing Wall-Mount brackets.
The screen display is very fragile, and must be protected at all times when installing
the base stand. Be sure that no hard or sharp object, or anything that could scratch
or damage the screen display, comes into contact with it. DO NOT exert pressure
on the front of the TV at any time because the screen could crack.
Follow the illustrations and textual instructions below to complete the installation steps:
Installing the Stand
Installing the Stand or Wall Mount Bracket
Two people and above are required.
1. Remove buckles on the upper box. Take out stands, upper cushion and sider
cushions. Place sider cushions in parallel and make sure grooves face-down. The
distance between the two sider cushions should be less than that of the base holes.
2. Two people stand on each side of the television, grasp big handles with one hand
and hold its bottom with the other hand. Lift and move the television vertically to the
middle of the sider cushions.
Big handles
Sider cushions
3. One person holds the television from the front side, the other person takes out 4
screws(M5×16) to install stands as the following steps: Take out cable clamps from
stands. Fix stands to the television with screws. Restore cable clamps to stands.
After installing, move the television to designated spot.
Loading ...
Loading ...
Loading ...