Loading ...
Loading ...
Loading ...
13
Troubleshooting
PROBLEM SOLUTION
No power 1. Make sure the unit is plugged in and the power switch is in the ON position.
2. Check that the power cable is plugged in tightly to the unit.
3. Check and replace the fuse if necessary. See fuse replacement diagram on page 14.
No sound 1. Check that all appropriate cables are plugged in correctly.
2. Check the Master Volume settings.
3. Check the individual level control of each channel as well as the MP3 volume control and CD/Tape volume control.
4. Be sure your microphone(s) is on.
Noise
1. Turn down the channel levels one by one. If you don't hear the sound, then the problem is either with the channel or whatever
device is plugged into it.
2. Unplug the device(s) to see if the sound disappears.
3. Make sure you are using the proper cables. For ¼˝ cables, there are 3 types: instrument, TS (unbalanced), and TRS (balanced).
Check the requirements of the connected gear and make sure you are using the appropriate cable.
Buzzing sound
Make sure you are using a proper cable. For ¼˝ cables, there are 3 types: instrument, TS (unbalanced), and TRS (balanced). Check the
requirements of the connected gear and make sure you are using the appropriate cable.
No SD/USB
playback
1. Make sure your SD card or USB ash drive is not damaged.
2. Make sure the SD card or USB drive is formatted as FAT or FAT32. Cards and drives formatted as NTFS are not recognized.
4. Check that the les on the media device are not corrupt.
3. Make sure the les are properly formatted (WAV, MP3, WMA).
Bluetooth pairing
fails/no sound
1. Check to see that both devices are turned on and that your Bluetooth device is discoverable.
2. Turn both devices off and then on again.
3. Make sure you've selected the proper source.
4. Make sure that the Bluetooth device is within 5 feet of the unit.
5. Move both devices away from other Bluetooth devices, microwaves, wireless routers, and other electronics.
6. Make sure that the unit is not connected to a previously paired device.
7. Make sure that all volume controls are set properly.
Loading ...
Loading ...
Loading ...