Loading ...
Loading ...
Loading ...
7. Click Apply.
Video Loss
Detect video loss of a camera and take alarm response acons.
Steps
1. Go to Conguraon → Event → Normal Event → Video Loss .
2. Set Camera.
3. Turn on Enable.
4. Set the arming schedule. Refer to Congure Arming Schedule for details.
5. Set the linkage acons. Refer to Congure Alarm Linkage Acon for details.
6. Click Apply.
Alarm Input
Set linkage acons for an external sensor alarm.
Steps
1. Go to Conguraon → Event → Normal Event → Alarm Input .
Figure 6-17 Alarm Input
Note
Local alarm input: Local alarm input is triggered by the external device that connected to the
video recorder's terminal block.
2. Click of a desired alarm input.
Figure 6-18 Edit Alarm Input
3. Customize Alarm Name.
4. Set alarm type as N.O (normally open) or N.C (normally closed).
5. Set Sengs as Input to enable the funcon.
Note
If you set Sengs as Nonuse, the alarm input will be disabled. If you set Sengs as One-Key
Disarming, the selected linkage method(s) of the alarm input will be disabled.
Digital Video Recorder User Manual
56
Loading ...
Loading ...
Loading ...