Loading ...
Loading ...
Loading ...
MAINTENANCE DPE-2100
34 X7508310301
© 12/23 ECHO Incorporated
Edger Blade Replacement
Level 1.
Parts required: Blade, new split pin.
Note: Replace blade when it is bent, damaged, or worn shorter than
152.4 mm (6 in.).
Wear gloves or personal injury may result Gearcase and
surrounding area may be hot.
1. Remove split pin (A).
2. Align hole in inner blade
adapter (B) with notch in gear
housing, and insert locking tool
(G) to prevent PTO shaft (C)
from rotating.
3. Remove L.H. blade nut (D) by
turning clockwise. Remove
outer blade adapter (E), and
blade (F).
4. Install and center blade (F) on
inner blade adapter (B).
5. Install outer adapter (E) and nut
(D). Tighten nut (D) firmly,
turning counterclockwise.
Note: Never reuse old split pin.
6. Install new split pin (A) to secure nut, and bend both legs of pin
counterclockwise around PTO shaft (C).
G
B
D
E
F
B
C
A
Loading ...
Loading ...
Loading ...